summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings
diff options
context:
space:
mode:
authorPhilippe Reynes <philippe.reynes@softathome.com>2019-03-22 17:02:01 +0100
committerTom Rini <trini@konsulko.com>2019-04-22 18:13:24 -0400
commitd00c6a2d5634eeb58d15746fce8ddc4cfc76eaee (patch)
tree43d2be6219e56f296764fd4f03b28b9b0e8f1829 /doc/device-tree-bindings
parent98ffbb78e12646a1d06236ad6a1893217f255aae (diff)
led: add initial support for bcm6858
The driver add the support of the led IP on bcm6858. This led IP can drive up to 32 leds, and can handle blinking. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Diffstat (limited to 'doc/device-tree-bindings')
-rw-r--r--doc/device-tree-bindings/leds/leds-bcm6858.txt51
1 files changed, 51 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/leds/leds-bcm6858.txt b/doc/device-tree-bindings/leds/leds-bcm6858.txt
new file mode 100644
index 0000000000..ea2fe23709
--- /dev/null
+++ b/doc/device-tree-bindings/leds/leds-bcm6858.txt
@@ -0,0 +1,51 @@
+LEDs connected to Broadcom BCM6858 controller
+
+This controller is present on BCM6858, BCM6328, BCM6362 and BCM63268.
+In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+
+Required properties:
+ - compatible : should be "brcm,bcm6858-leds".
+ - #address-cells : must be 1.
+ - #size-cells : must be 0.
+ - reg : BCM6858 LED controller address and size.
+
+Optional properties:
+ - brcm,serial-led-msb-first : Boolean, msb data come out first on serial data pin
+ Default : false
+ - brcm,serial-led-en-pol : Boolean, serial led polarity (true => active high)
+ Default : false
+ - brcm,serial-led-clk-pol : Boolean, serial clock polarity (true => active high)
+ Default : false
+ - brcm,serial-led-data-ppol : Boolean, serial data polarity (true => active high)
+ Default : false
+ - brcm,serial-shift-inv : Boolean, led test mode
+ Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6858-leds device.
+
+LED sub-node required properties:
+ - reg : LED pin number (only LEDs 0 to 32 are valid).
+
+LED sub-node optional properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - active-low : Boolean, makes LED active low.
+ Default : false
+
+Examples:
+BCM6328 with 2 GPIO LEDs
+ leds0: led-controller@ff800800 {
+ compatible = "brcm,bcm6858-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0xff800800 0x0 0xe4>;
+
+ led@2 {
+ reg = <2>;
+ label = "green:inet";
+ };
+
+ led@5 {
+ reg = <5>;
+ label = "red:alarm";
+ };
+ };