diff options
| author | Breno Matheus Lima <breno.lima@nxp.com> | 2018-10-10 01:10:31 +0000 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-10-22 14:22:42 +0200 |
| commit | 3af3bebc215428aba3c7fd176d7f146045d51d68 (patch) | |
| tree | 56346fa75f7c91db9cf075c6ba14ddc55eddd190 /doc/imx/README.imx6 | |
| parent | df11b0c4d4e3ca3821cf4cc6b13fb9fee1d5f891 (diff) | |
doc: imx: Move SPD related info to the appropriate doc
Currently the Serial Download Protocol tools and procedure are
documented in two places:
- doc/imx/README.sdp
- doc/imx/README.imx6
It is better to consolidate all SDP related information into
README.sdp file, so move the content from README.imx6 to
README.sdp.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Diffstat (limited to 'doc/imx/README.imx6')
| -rw-r--r-- | doc/imx/README.imx6 | 25 |
1 files changed, 0 insertions, 25 deletions
diff --git a/doc/imx/README.imx6 b/doc/imx/README.imx6 index b0644f8491..eab88353f6 100644 --- a/doc/imx/README.imx6 +++ b/doc/imx/README.imx6 @@ -88,28 +88,3 @@ Reading bank 4: Word 0x00000002: 9f027772 00000004 -2. Using imx_usb_loader for first install with SPL --------------------------------------------------- - -imx_usb_loader is a very nice tool by Boundary Devices that -allow to install U-Boot without a JTAG debugger, using -the USB boot mode as described in the manual. It is -a replacement for Freescale's MFGTOOLS. - -The sources can be found here: - - https://github.com/boundarydevices/imx_usb_loader.git - -Booting in USB mode, the i.MX6 announces itself to the Linux Host as: - -Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc. - -imx_usb_loader is able to download a single file (u-boot.imx) -to the board. For boards without SPL support, it is enough to -issue the command: - - sudo ../imx_usb_loader/imx_usb -v u-boot.imx - -In order to load SPL and u-boot.img via imx_usb_loader tool, -please refer to doc/README.sdp. - |