Merge git://www.denx.de/git/u-boot

6 files changed, 14 insertions, 26 deletions

diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index 270da9082f..c5d67fd4e0 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -2,7 +2,7 @@ JFFS2 options and usage.
 -----------------------
 
 JFFS2 in U-Boot is a read only implementation of the file system in
-Linux with the same name. To use JFFS2 define CFG_CMD_JFFS2.
+Linux with the same name. To use JFFS2 define CONFIG_CMD_JFFS2.
 
 The module adds three new commands.
 fsload  - load binary file from a file system image
diff --git a/doc/README.PIP405 b/doc/README.PIP405
index c5ccf1875e..610ff2161d 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -32,10 +32,8 @@ Changed files:
 - include/cmd_bsp.h		added PIP405 commands definitions
 - include/cmd_condefs.h		added Floppy and SCSI support
 - include/cmd_disk.h		changed to work with block device description
-- include/config_LANTEC.h	excluded CFG_CMD_FDC and CFG_CMD_SCSI from
-				CONFIG_CMD_FULL
-- include/config_hymod.h	excluded CFG_CMD_FDC and CFG_CMD_SCSI from
-				CONFIG_CMD_FULL
+- include/config_LANTEC.h	excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
+- include/config_hymod.h	excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
 - include/flash.h		added INTEL_ID_28F320C3T  0x88C488C4
 - include/i2c.h			added "defined(CONFIG_PIP405)"
 - include/image.h		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
@@ -88,8 +86,8 @@ section "Changes".
 
 New Commands:
 -------------
-CFG_CMD_SCSI	SCSI Support
-CFG_CMF_FDC	Floppy disk support
+CONFIG_CMD_SCSI	SCSI Support
+CONFIG_CMF_FDC	Floppy disk support
 
 IDE additions:
 --------------
@@ -172,8 +170,8 @@ Added Devices:
 Floppy support:
 ---------------
 Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS
-+ 0x3F0. Enabled with define CFG_CMD_FDC. Reads a unformated floppy disk with a
-image header (see: mkimage). No interrupts and no DMA are used for this.
++ 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk
+with a image header (see: mkimage). No interrupts and no DMA are used for this.
 Added files:
 - common/cmd_fdc.c
 - include/cmd_fdc.h
diff --git a/doc/README.SNTP b/doc/README.SNTP
index fd6f2098f9..9edc957c6f 100644
--- a/doc/README.SNTP
+++ b/doc/README.SNTP
@@ -1,5 +1,5 @@
-To use SNTP support, add a define CFG_CMD_SNTP to CONFIG_COMMANDS in
-the configuration file of the board.
+To use SNTP support, add define CONFIG_CMD_SNTP to the
+configuration file of the board.
 
 The "sntp" command gets network time from NTP time server and
 syncronize RTC of the board. This command needs the command line
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 9cfb4217fe..2616acc653 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -31,12 +31,6 @@ can be easily implemented.
 	if it is an illegal instruction, privileged instruction or
 	a trap. Also added debug trap handler.
 
-./include/cmd_confdefs.h
-	Added definition of CFG_CMD_BEDBUG.
-
-./include/config_WALNUT405.h
-	Added CFG_CMD_BEDBUG to the CONFIG_COMMANDS for the WALNUT.
-
 ./include/ppc_asm.tmpl
 	Added code to handle critical exceptions
 
@@ -78,10 +72,6 @@ Changes:
 	cpu/mpc8xx/traps.c
 		Added new routine DebugException()
 
-	include/config_MBX.h
-		Added CFG_CMD_BEDBUG to CONFIG_COMMANDS define
-
-
 New Files:
 
 	cpu/mpc8xx/bedbug_860.c
diff --git a/doc/README.nand b/doc/README.nand
index 5c31845a94..c5c5ef29e6 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -93,8 +93,8 @@ Commands:
 
 Configuration Options:
 
-   CFG_CMD_NAND
-      A good one to add to CONFIG_COMMANDS since it enables NAND support.
+   CONFIG_CMD_NAND
+      Enables NAND support and commmands.
 
    CONFIG_MTD_NAND_ECC_JFFS2
       Define this if you want the Error Correction Code information in
diff --git a/doc/README.usb b/doc/README.usb
index 41f76f4b7e..b3bcb91f40 100644
--- a/doc/README.usb
+++ b/doc/README.usb
@@ -73,8 +73,8 @@ Storage USB Commands:
 
 Config Switches:
 ----------------
-CFG_CMD_USB	    enables basic USB support and the usb command
-CONFIG_USB_UHCI	    defines the lowlevel part.A lowlevel part must be defined if
-		    using CFG_CMD_USB
+CONFIG_CMD_USB	    enables basic USB support and the usb command
+CONFIG_USB_UHCI	    defines the lowlevel part.A lowlevel part must be defined
+		    if using CONFIG_CMD_USB
 CONFIG_USB_KEYBOARD enables the USB Keyboard
 CONFIG_USB_STORAGE  enables the USB storage devices