* Patch by Jon Loeliger, 2005-05-05

  Implemented support for MPC8548CDS board.
  Added DDR II support based on SPD values for MPC85xx boards.
  This roll-up patch also includes bugfies for the previously
  published patches:
    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O

2 files changed, 46 insertions, 6 deletions

diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index c488f2a56b..08d6831fb6 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -143,6 +143,7 @@ Updated 13-July-2004 Jon Loeliger
     CONFIG_DDR_ECC	    only for ECC DDR module
     CONFIG_DDR_DLL	    DLL fix on some ADS boards needed for more
 			    stability.
+    CONFIG_HAS_FEC	    If an FEC is on chip, set to 1, else 0.
 
 Other than the above definitions, the rest in the config files are
 straightforward.
@@ -190,10 +191,10 @@ straightforward.
 
 4.4 Reflash U-boot Image using U-boot
 
-    => tftp 10000 u-boot.bin
-    => protect off fff80000 ffffffff
-    => erase fff80000 ffffffff
-    => cp.b 10000 fff80000 80000
+    tftp 10000 u-boot.bin
+    protect off fff80000 ffffffff
+    erase fff80000 ffffffff
+    cp.b 10000 fff80000 80000
 
 
 4.5 Reflash U-Boot with a BDI-2000
diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds
index e0f49163ed..bc5db0ca8e 100644
--- a/doc/README.mpc85xxcds
+++ b/doc/README.mpc85xxcds
@@ -135,8 +135,8 @@ The default setting of all switches on the carrier board is:
   SW4=10001000
 
 
-CPU Card Switches
------------------
+8555/41 CPU Card Switches
+-------------------------
 
 Most switches on the CPU Card should not be changed.  However, the
 frequency can be changed by setting SW3:
@@ -160,6 +160,45 @@ A safe default setting for all switches on the CPU board is:
   SW4=11111110
 
 
+8548 CPU Card Switches
+----------------------
+And, just to be confusing, in this set of switches:
+
+    ON  = 1
+    OFF = 0
+
+Default
+  SW1=11111101
+  SW2=10011111
+  SW3=11001000    (8X) (2:1)
+  SW4=11110011
+
+  SW3=X000XXXX  == CORE:CCB    4:1
+      X001XXXX  == CORE:CCB    9:2
+      X010XXXX  == CORE:CCB    1:1
+      X011XXXX  == CORE:CCB    3:2
+      X100XXXX  == CORE:CCB    2:1
+      X101XXXX  == CORE:CCB    5:2
+      X110XXXX  == CORE:CCB    3:1
+      X111XXXX  == CORE:CCB    7:2
+      XXXX0000  == CCB:SYSCLK 16:1
+      XXXX0001  == RESERVED
+      XXXX0010  == CCB:SYSCLK  2:1
+      XXXX0011  == CCB:SYSCLK  3:1
+      XXXX0100  == CCB:SYSCLK  4:1
+      XXXX0101  == CCB:SYSCLK  5:1
+      XXXX0110  == CCB:SYSCLK  6:1
+      XXXX0111  == RESERVED
+      XXXX1000  == CCB:SYSCLK  8:1
+      XXXX1001  == CCB:SYSCLK  9:1
+      XXXX1010  == CCB:SYSCLK 10:1
+      XXXX1011  == RESERVED
+      XXXX1100  == CCB:SYSCLK 12:1
+      XXXX1101  == CCB:SYSCLK 20:1
+      XXXX1110  == RESERVED
+      XXXX1111  == RESERVED
+
+
 eDINK Info
 ----------