ata: fsl_ahci: Add sata DM support for Freescale powerpc socs

This patch is to support Freescale sata driver with dts initialized.
Also resolved the following problems.

===================== WARNING ======================
This board does not use CONFIG_DM_SCSI. Please update
the storage controller to use CONFIG_DM_SCSI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

4 files changed, 1042 insertions, 0 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4e95a68a2d..87636ae30f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -59,6 +59,16 @@ config DWC_AHCI
 	  Enable this driver to support Sata devices through
 	  Synopsys DWC AHCI module.
 
+config FSL_AHCI
+	bool "Enable Freescale AHCI driver support"
+	select SCSI_AHCI
+	depends on AHCI
+	depends on DM_SCSI
+	help
+	  Enable this driver to support Sata devices found in
+	  some Freescale PowerPC SoCs.
+
+
 config DWC_AHSATA
 	bool "Enable DWC AHSATA driver support"
 	select LIBATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a69edb10f7..6e03384f81 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,6 +4,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
 obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
+obj-$(CONFIG_FSL_AHCI) += fsl_ahci.o
 obj-$(CONFIG_AHCI) += ahci-uclass.o
 obj-$(CONFIG_AHCI_PCI) += ahci-pci.o
 obj-$(CONFIG_SCSI_AHCI) += ahci.o
diff --git a/drivers/ata/fsl_ahci.c b/drivers/ata/fsl_ahci.c
new file mode 100644
index 0000000000..d04cff3ee7
--- /dev/null
+++ b/drivers/ata/fsl_ahci.c
@@ -0,0 +1,1030 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP PPC SATA platform driver
+ *
+ * (C) Copyright 2019 NXP, Inc.
+ *
+ */
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <dm/lists.h>
+#include <dm.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <libata.h>
+#include <sata.h>
+#include <malloc.h>
+#include <memalign.h>
+#include <fis.h>
+
+#include "fsl_sata.h"
+
+struct fsl_ahci_priv {
+	u32 base;
+	u32 flag;
+	u32 number;
+	fsl_sata_t *fsl_sata;
+};
+
+static int fsl_ahci_bind(struct udevice *dev)
+{
+	return device_bind_driver(dev, "fsl_ahci_scsi", "fsl_ahci_scsi", NULL);
+}
+
+static int fsl_ahci_ofdata_to_platdata(struct udevice *dev)
+{
+	struct fsl_ahci_priv *priv = dev_get_priv(dev);
+
+	priv->number = dev_read_u32_default(dev, "sata-number", -1);
+	priv->flag = dev_read_u32_default(dev, "sata-fpdma", -1);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ata_wait_register(unsigned __iomem *addr, u32 mask,
+			     u32 val, u32 timeout_msec)
+{
+	int i;
+
+	for (i = 0; ((in_le32(addr) & mask) != val) && i < timeout_msec; i++)
+		mdelay(1);
+
+	return (i < timeout_msec) ? 0 : -1;
+}
+
+static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
+{
+	printf("Status FIS dump:\n\r");
+	printf("fis_type:		%02x\n\r", s->fis_type);
+	printf("pm_port_i:		%02x\n\r", s->pm_port_i);
+	printf("status:			%02x\n\r", s->status);
+	printf("error:			%02x\n\r", s->error);
+	printf("lba_low:		%02x\n\r", s->lba_low);
+	printf("lba_mid:		%02x\n\r", s->lba_mid);
+	printf("lba_high:		%02x\n\r", s->lba_high);
+	printf("device:			%02x\n\r", s->device);
+	printf("lba_low_exp:		%02x\n\r", s->lba_low_exp);
+	printf("lba_mid_exp:		%02x\n\r", s->lba_mid_exp);
+	printf("lba_high_exp:		%02x\n\r", s->lba_high_exp);
+	printf("res1:			%02x\n\r", s->res1);
+	printf("sector_count:		%02x\n\r", s->sector_count);
+	printf("sector_count_exp:	%02x\n\r", s->sector_count_exp);
+}
+
+static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
+{
+	printf("\n\rSATA:           %08x\n\r", (u32)reg);
+	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
+	printf("CAR:            %08x\n\r", in_le32(&reg->car));
+	printf("CCR:            %08x\n\r", in_le32(&reg->ccr));
+	printf("CER:            %08x\n\r", in_le32(&reg->cer));
+	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
+	printf("DER:            %08x\n\r", in_le32(&reg->der));
+	printf("CHBA:           %08x\n\r", in_le32(&reg->chba));
+	printf("HStatus:        %08x\n\r", in_le32(&reg->hstatus));
+	printf("HControl:       %08x\n\r", in_le32(&reg->hcontrol));
+	printf("CQPMP:          %08x\n\r", in_le32(&reg->cqpmp));
+	printf("SIG:            %08x\n\r", in_le32(&reg->sig));
+	printf("ICC:            %08x\n\r", in_le32(&reg->icc));
+	printf("SStatus:        %08x\n\r", in_le32(&reg->sstatus));
+	printf("SError:         %08x\n\r", in_le32(&reg->serror));
+	printf("SControl:       %08x\n\r", in_le32(&reg->scontrol));
+	printf("SNotification:  %08x\n\r", in_le32(&reg->snotification));
+	printf("TransCfg:       %08x\n\r", in_le32(&reg->transcfg));
+	printf("TransStatus:    %08x\n\r", in_le32(&reg->transstatus));
+	printf("LinkCfg:        %08x\n\r", in_le32(&reg->linkcfg));
+	printf("LinkCfg1:       %08x\n\r", in_le32(&reg->linkcfg1));
+	printf("LinkCfg2:       %08x\n\r", in_le32(&reg->linkcfg2));
+	printf("LinkStatus:     %08x\n\r", in_le32(&reg->linkstatus));
+	printf("LinkStatus1:    %08x\n\r", in_le32(&reg->linkstatus1));
+	printf("PhyCtrlCfg:     %08x\n\r", in_le32(&reg->phyctrlcfg));
+	printf("SYSPR:          %08x\n\r", in_be32(&reg->syspr));
+}
+
+static int init_sata(struct fsl_ahci_priv *priv)
+{
+	int i;
+	u32 cda;
+	u32 val32;
+	u32 sig;
+	fsl_sata_t *sata;
+	u32 length, align;
+	cmd_hdr_tbl_t *cmd_hdr;
+	fsl_sata_reg_t __iomem *reg;
+
+	int dev = priv->number;
+
+	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+		printf("the sata index %d is out of ranges\n\r", dev);
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_MPC85xx
+	if (dev == 0 && (!is_serdes_configured(SATA1))) {
+		printf("SATA%d [dev = %d] is not enabled\n", dev + 1, dev);
+		return -EINVAL;
+	}
+	if (dev == 1 && (!is_serdes_configured(SATA2))) {
+		printf("SATA%d [dev = %d] is not enabled\n", dev + 1, dev);
+		return -EINVAL;
+	}
+#endif
+
+	/* Allocate SATA device driver struct */
+	sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
+	if (!sata) {
+		printf("alloc the sata device struct failed\n\r");
+		return -ENOMEM;
+	}
+	/* Zero all of the device driver struct */
+	memset((void *)sata, 0, sizeof(fsl_sata_t));
+
+	sata->dma_flag = priv->flag;
+	snprintf(sata->name, 12, "SATA%d", dev);
+
+	/* Set the controller register base address to device struct */
+	reg = (fsl_sata_reg_t *)priv->base;
+	sata->reg_base = reg;
+
+	/* Allocate the command header table, 4 bytes aligned */
+	length = sizeof(struct cmd_hdr_tbl);
+	align = SATA_HC_CMD_HDR_TBL_ALIGN;
+	sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
+	if (!sata->cmd_hdr_tbl_offset) {
+		printf("alloc the command header failed\n\r");
+		return -ENOMEM;
+	}
+
+	cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
+						& ~(align - 1));
+	sata->cmd_hdr = cmd_hdr;
+
+	/* Zero all of the command header table */
+	memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
+
+	/* Allocate command descriptor for all command */
+	length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
+	align = SATA_HC_CMD_DESC_ALIGN;
+	sata->cmd_desc_offset = (void *)malloc(length + align);
+	if (!sata->cmd_desc_offset) {
+		printf("alloc the command descriptor failed\n\r");
+		return -ENOMEM;
+	}
+	sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
+						& ~(align - 1));
+	/* Zero all of command descriptor */
+	memset((void *)sata->cmd_desc_offset, 0, length + align);
+
+	/* Link the command descriptor to command header */
+	for (i = 0; i < SATA_HC_MAX_CMD; i++) {
+		cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
+					 & ~(CMD_HDR_CDA_ALIGN - 1);
+		cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
+	}
+
+	/* To have safe state, force the controller offline */
+	val32 = in_le32(&reg->hcontrol);
+	val32 &= ~HCONTROL_ONOFF;
+	val32 |= HCONTROL_FORCE_OFFLINE;
+	out_le32(&reg->hcontrol, val32);
+
+	/* Wait the controller offline */
+	ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
+
+	/* Set the command header base address to CHBA register to tell DMA */
+	out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
+
+	/* Snoop for the command header */
+	val32 = in_le32(&reg->hcontrol);
+	val32 |= HCONTROL_HDR_SNOOP;
+	out_le32(&reg->hcontrol, val32);
+
+	/* Disable all of interrupts */
+	val32 = in_le32(&reg->hcontrol);
+	val32 &= ~HCONTROL_INT_EN_ALL;
+	out_le32(&reg->hcontrol, val32);
+
+	/* Clear all of interrupts */
+	val32 = in_le32(&reg->hstatus);
+	out_le32(&reg->hstatus, val32);
+
+	/* Set the ICC, no interrupt coalescing */
+	out_le32(&reg->icc, 0x01000000);
+
+	/* No PM attatched, the SATA device direct connect */
+	out_le32(&reg->cqpmp, 0);
+
+	/* Clear SError register */
+	val32 = in_le32(&reg->serror);
+	out_le32(&reg->serror, val32);
+
+	/* Clear CER register */
+	val32 = in_le32(&reg->cer);
+	out_le32(&reg->cer, val32);
+
+	/* Clear DER register */
+	val32 = in_le32(&reg->der);
+	out_le32(&reg->der, val32);
+
+	/* No device detection or initialization action requested */
+	out_le32(&reg->scontrol, 0x00000300);
+
+	/* Configure the transport layer, default value */
+	out_le32(&reg->transcfg, 0x08000016);
+
+	/* Configure the link layer, default value */
+	out_le32(&reg->linkcfg, 0x0000ff34);
+
+	/* Bring the controller online */
+	val32 = in_le32(&reg->hcontrol);
+	val32 |= HCONTROL_ONOFF;
+	out_le32(&reg->hcontrol, val32);
+
+	mdelay(100);
+
+	/* print sata device name */
+	printf("%s ", sata->name);
+
+	/* Wait PHY RDY signal changed for 500ms */
+	ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
+			  HSTATUS_PHY_RDY, 500);
+
+	/* Check PHYRDY */
+	val32 = in_le32(&reg->hstatus);
+	if (val32 & HSTATUS_PHY_RDY) {
+		sata->link = 1;
+	} else {
+		sata->link = 0;
+		printf("(No RDY)\n\r");
+		return -EINVAL;
+	}
+
+	/* Wait for signature updated, which is 1st D2H */
+	ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
+			  HSTATUS_SIGNATURE, 10000);
+
+	if (val32 & HSTATUS_SIGNATURE) {
+		sig = in_le32(&reg->sig);
+		debug("Signature updated, the sig =%08x\n\r", sig);
+		sata->ata_device_type = ata_dev_classify(sig);
+	}
+
+	/* Check the speed */
+	val32 = in_le32(&reg->sstatus);
+	if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
+		printf("(1.5 Gbps)\n\r");
+	else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
+		printf("(3 Gbps)\n\r");
+
+	priv->fsl_sata = sata;
+
+	return 0;
+}
+
+static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata,
+				struct sata_fis_h2d *cfis,
+				int is_ncq, int tag,
+				u8 *buffer, u32 len)
+{
+	cmd_hdr_entry_t *cmd_hdr;
+	cmd_desc_t *cmd_desc;
+	sata_fis_h2d_t *h2d;
+	prd_entry_t *prde;
+	u32 ext_c_ddc;
+	u32 prde_count;
+	u32 val32;
+	u32 ttl;
+	u32 der;
+	int i;
+
+	fsl_sata_reg_t *reg = sata->reg_base;
+
+	/* Check xfer length */
+	if (len > SATA_HC_MAX_XFER_LEN) {
+		printf("max transfer length is 64MB\n\r");
+		return 0;
+	}
+
+	/* Setup the command descriptor */
+	cmd_desc = sata->cmd_desc + tag;
+
+	/* Get the pointer cfis of command descriptor */
+	h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
+
+	/* Zero the cfis of command descriptor */
+	memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
+
+	/* Copy the cfis from user to command descriptor */
+	h2d->fis_type = cfis->fis_type;
+	h2d->pm_port_c = cfis->pm_port_c;
+	h2d->command = cfis->command;
+
+	h2d->features = cfis->features;
+	h2d->features_exp = cfis->features_exp;
+
+	h2d->lba_low = cfis->lba_low;
+	h2d->lba_mid = cfis->lba_mid;
+	h2d->lba_high = cfis->lba_high;
+	h2d->lba_low_exp = cfis->lba_low_exp;
+	h2d->lba_mid_exp = cfis->lba_mid_exp;
+	h2d->lba_high_exp = cfis->lba_high_exp;
+
+	if (!is_ncq) {
+		h2d->sector_count = cfis->sector_count;
+		h2d->sector_count_exp = cfis->sector_count_exp;
+	} else { /* NCQ */
+		h2d->sector_count = (u8)(tag << 3);
+	}
+
+	h2d->device = cfis->device;
+	h2d->control = cfis->control;
+
+	/* Setup the PRD table */
+	prde = (prd_entry_t *)cmd_desc->prdt;
+	memset((void *)prde, 0, sizeof(struct prdt));
+
+	prde_count = 0;
+	ttl = len;
+	for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
+		if (!len)
+			break;
+		prde->dba = cpu_to_le32((u32)buffer & ~0x3);
+		debug("dba = %08x\n\r", (u32)buffer);
+
+		if (len < PRD_ENTRY_MAX_XFER_SZ) {
+			ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
+			debug("ext_c_ddc1 = %08x, len = %08x\n\r",
+			      ext_c_ddc, len);
+			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+			prde_count++;
+			prde++;
+		} else {
+			ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
+			debug("ext_c_ddc2 = %08x, len = %08x\n\r",
+			      ext_c_ddc, len);
+			prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
+			buffer += PRD_ENTRY_MAX_XFER_SZ;
+			len -= PRD_ENTRY_MAX_XFER_SZ;
+			prde_count++;
+			prde++;
+		}
+	}
+
+	/* Setup the command slot of cmd hdr */
+	cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
+
+	cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
+
+	val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
+	val32 |= sizeof(sata_fis_h2d_t);
+	cmd_hdr->prde_fis_len = cpu_to_le32(val32);
+
+	cmd_hdr->ttl = cpu_to_le32(ttl);
+
+	if (!is_ncq)
+		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
+	else
+		val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP |
+			CMD_HDR_ATTR_FPDMA;
+
+	tag &= CMD_HDR_ATTR_TAG;
+	val32 |= tag;
+
+	debug("attribute = %08x\n\r", val32);
+	cmd_hdr->attribute = cpu_to_le32(val32);
+
+	/* Make sure cmd desc and cmd slot valid before command issue */
+	sync();
+
+	/* PMP*/
+	val32 = (u32)(h2d->pm_port_c & 0x0f);
+	out_le32(&reg->cqpmp, val32);
+
+	/* Wait no active */
+	if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
+		printf("Wait no active time out\n\r");
+
+	/* Issue command */
+	if (!(in_le32(&reg->cqr) & (1 << tag))) {
+		val32 = 1 << tag;
+		out_le32(&reg->cqr, val32);
+	}
+
+	/* Wait command completed for 10s */
+	if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
+		if (!is_ncq)
+			printf("Non-NCQ command time out\n\r");
+		else
+			printf("NCQ command time out\n\r");
+	}
+
+	val32 = in_le32(&reg->cer);
+
+	if (val32) {
+		fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
+		printf("CE at device\n\r");
+		fsl_sata_dump_regs(reg);
+		der = in_le32(&reg->der);
+		out_le32(&reg->cer, val32);
+		out_le32(&reg->der, der);
+	}
+
+	/* Clear complete flags */
+	val32 = in_le32(&reg->ccr);
+	out_le32(&reg->ccr, val32);
+
+	return len;
+}
+
+static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
+			     enum cmd_type command_type, int tag, u8 *buffer,
+			     u32 len)
+{
+	int rc;
+
+	if (tag > SATA_HC_MAX_CMD || tag < 0) {
+		printf("tag is out of range, tag=%d\n\r", tag);
+		return -1;
+	}
+
+	switch (command_type) {
+	case CMD_ATA:
+		rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
+		return rc;
+	case CMD_NCQ:
+		rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
+		return rc;
+	case CMD_ATAPI:
+	case CMD_VENDOR_BIST:
+	case CMD_BIST:
+		printf("not support now\n\r");
+		return -1;
+	default:
+		break;
+	}
+
+	return -1;
+}
+
+static void fsl_sata_identify(fsl_sata_t *sata, u16 *id)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+	cfis->command = ATA_CMD_ID_ATA;
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
+	ata_swap_buf_le16(id, ATA_ID_WORDS);
+}
+
+static void fsl_sata_xfer_mode(fsl_sata_t *sata, u16 *id)
+{
+	sata->pio = id[ATA_ID_PIO_MODES];
+	sata->mwdma = id[ATA_ID_MWDMA_MODES];
+	sata->udma = id[ATA_ID_UDMA_MODES];
+	debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio,
+	      sata->mwdma, sata->udma);
+}
+
+static void fsl_sata_init_wcache(fsl_sata_t *sata, u16 *id)
+{
+	if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+		sata->wcache = 1;
+	if (ata_id_has_flush(id))
+		sata->flush = 1;
+	if (ata_id_has_flush_ext(id))
+		sata->flush_ext = 1;
+}
+
+static void fsl_sata_set_features(fsl_sata_t *sata)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+	u8 udma_cap;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+	cfis->command = ATA_CMD_SET_FEATURES;
+	cfis->features = SETFEATURES_XFER;
+
+	/* First check the device capablity */
+	udma_cap = (u8)(sata->udma & 0xff);
+	debug("udma_cap %02x\n\r", udma_cap);
+
+	if (udma_cap == ATA_UDMA6)
+		cfis->sector_count = XFER_UDMA_6;
+	if (udma_cap == ATA_UDMA5)
+		cfis->sector_count = XFER_UDMA_5;
+	if (udma_cap == ATA_UDMA4)
+		cfis->sector_count = XFER_UDMA_4;
+	if (udma_cap == ATA_UDMA3)
+		cfis->sector_count = XFER_UDMA_3;
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
+			   u8 *buffer, int is_write)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+	u32 block;
+
+	block = start;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+	cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
+	cfis->device = ATA_LBA;
+
+	cfis->device |= (block >> 24) & 0xf;
+	cfis->lba_high = (block >> 16) & 0xff;
+	cfis->lba_mid = (block >> 8) & 0xff;
+	cfis->lba_low = block & 0xff;
+	cfis->sector_count = (u8)(blkcnt & 0xff);
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer,
+			  ATA_SECT_SIZE * blkcnt);
+	return blkcnt;
+}
+
+static void fsl_sata_flush_cache(fsl_sata_t *sata)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+	cfis->command = ATA_CMD_FLUSH;
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 fsl_sata_rw_cmd_ext(fsl_sata_t *sata, u32 start,
+			       u32 blkcnt, u8 *buffer, int is_write)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+	u64 block;
+
+	block = (u64)start;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+
+	cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
+				 : ATA_CMD_READ_EXT;
+
+	cfis->lba_high_exp = (block >> 40) & 0xff;
+	cfis->lba_mid_exp = (block >> 32) & 0xff;
+	cfis->lba_low_exp = (block >> 24) & 0xff;
+	cfis->lba_high = (block >> 16) & 0xff;
+	cfis->lba_mid = (block >> 8) & 0xff;
+	cfis->lba_low = block & 0xff;
+	cfis->device = ATA_LBA;
+	cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
+	cfis->sector_count = blkcnt & 0xff;
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer,
+			  ATA_SECT_SIZE * blkcnt);
+	return blkcnt;
+}
+
+static u32 fsl_sata_rw_ncq_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
+			       u8 *buffer,
+			       int is_write)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+	int ncq_channel;
+	u64 block;
+
+	if (sata->lba48 != 1) {
+		printf("execute FPDMA command on non-LBA48 hard disk\n\r");
+		return -1;
+	}
+
+	block = (u64)start;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+
+	cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
+				 : ATA_CMD_FPDMA_READ;
+
+	cfis->lba_high_exp = (block >> 40) & 0xff;
+	cfis->lba_mid_exp = (block >> 32) & 0xff;
+	cfis->lba_low_exp = (block >> 24) & 0xff;
+	cfis->lba_high = (block >> 16) & 0xff;
+	cfis->lba_mid = (block >> 8) & 0xff;
+	cfis->lba_low = block & 0xff;
+
+	cfis->device = ATA_LBA;
+	cfis->features_exp = (blkcnt >> 8) & 0xff;
+	cfis->features = blkcnt & 0xff;
+
+	if (sata->queue_depth >= SATA_HC_MAX_CMD)
+		ncq_channel = SATA_HC_MAX_CMD - 1;
+	else
+		ncq_channel = sata->queue_depth - 1;
+
+	/* Use the latest queue */
+	fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer,
+			  ATA_SECT_SIZE * blkcnt);
+	return blkcnt;
+}
+
+static void fsl_sata_flush_cache_ext(fsl_sata_t *sata)
+{
+	struct sata_fis_h2d h2d, *cfis = &h2d;
+
+	memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+	cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	cfis->pm_port_c = 0x80; /* is command */
+	cfis->command = ATA_CMD_FLUSH_EXT;
+
+	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
+}
+
+static u32 ata_low_level_rw_lba48(fsl_sata_t *sata, u32 blknr, lbaint_t blkcnt,
+				  const void *buffer, int is_write)
+{
+	u32 start, blks;
+	u8 *addr;
+	int max_blks;
+
+	start = blknr;
+	blks = blkcnt;
+	addr = (u8 *)buffer;
+
+	max_blks = ATA_MAX_SECTORS_LBA48;
+	do {
+		if (blks > max_blks) {
+			if (sata->dma_flag != FLAGS_FPDMA)
+				fsl_sata_rw_cmd_ext(sata, start, max_blks,
+						    addr, is_write);
+			else
+				fsl_sata_rw_ncq_cmd(sata, start, max_blks,
+						    addr, is_write);
+			start += max_blks;
+			blks -= max_blks;
+			addr += ATA_SECT_SIZE * max_blks;
+		} else {
+			if (sata->dma_flag != FLAGS_FPDMA)
+				fsl_sata_rw_cmd_ext(sata, start, blks,
+						    addr, is_write);
+			else
+				fsl_sata_rw_ncq_cmd(sata, start, blks,
+						    addr, is_write);
+			start += blks;
+			blks = 0;
+			addr += ATA_SECT_SIZE * blks;
+		}
+	} while (blks != 0);
+
+	return blks;
+}
+
+static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt,
+				  const void *buffer, int is_write)
+{
+	u32 start, blks;
+	u8 *addr;
+	int max_blks;
+
+	start = blknr;
+	blks = blkcnt;
+	addr = (u8 *)buffer;
+
+	max_blks = ATA_MAX_SECTORS;
+	do {
+		if (blks > max_blks) {
+			fsl_sata_rw_cmd(sata, start, max_blks, addr, is_write);
+			start += max_blks;
+			blks -= max_blks;
+			addr += ATA_SECT_SIZE * max_blks;
+		} else {
+			fsl_sata_rw_cmd(sata, start, blks, addr, is_write);
+			start += blks;
+			blks = 0;
+			addr += ATA_SECT_SIZE * blks;
+		}
+	} while (blks != 0);
+
+	return blks;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+static int sata_read(fsl_sata_t *sata, ulong blknr, lbaint_t blkcnt,
+		     void *buffer)
+{
+	u32 rc;
+
+	if (sata->lba48)
+		rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+					    READ_CMD);
+	else
+		rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+					    READ_CMD);
+	return rc;
+}
+
+static int sata_write(fsl_sata_t *sata, ulong blknr, lbaint_t blkcnt,
+		      const void *buffer)
+{
+	u32 rc;
+
+	if (sata->lba48) {
+		rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+					    WRITE_CMD);
+		if (sata->wcache && sata->flush_ext)
+			fsl_sata_flush_cache_ext(sata);
+	} else {
+		rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+					    WRITE_CMD);
+		if (sata->wcache && sata->flush)
+			fsl_sata_flush_cache(sata);
+	}
+
+	return rc;
+}
+
+int sata_getinfo(fsl_sata_t *sata, u16 *id)
+{
+	/* if no detected link */
+	if (!sata->link)
+		return -EINVAL;
+
+#ifdef CONFIG_LBA48
+	/* Check if support LBA48 */
+	if (ata_id_has_lba48(id)) {
+		sata->lba48 = 1;
+		debug("Device support LBA48\n\r");
+	} else {
+		debug("Device supports LBA28\n\r");
+	}
+#endif
+
+	/* Get the NCQ queue depth from device */
+	sata->queue_depth = ata_id_queue_depth(id);
+
+	/* Get the xfer mode from device */
+	fsl_sata_xfer_mode(sata, id);
+
+	/* Get the write cache status from device */
+	fsl_sata_init_wcache(sata, id);
+
+	/* Set the xfer mode to highest speed */
+	fsl_sata_set_features(sata);
+
+	return 0;
+}
+
+static int fsl_scsi_exec(fsl_sata_t *sata, struct scsi_cmd *pccb,
+			 bool is_write)
+{
+	int ret;
+	u32 temp;
+	u16 blocks = 0;
+	lbaint_t start = 0;
+	u8 *buffer = pccb->pdata;
+
+	/* Retrieve the base LBA number from the ccb structure. */
+	if (pccb->cmd[0] == SCSI_READ16) {
+		memcpy(&start, pccb->cmd + 2, 8);
+		start = be64_to_cpu(start);
+	} else {
+		memcpy(&temp, pccb->cmd + 2, 4);
+		start = be32_to_cpu(temp);
+	}
+
+	if (pccb->cmd[0] == SCSI_READ16)
+		blocks = (((u16)pccb->cmd[13]) << 8) | ((u16)pccb->cmd[14]);
+	else
+		blocks = (((u16)pccb->cmd[7]) << 8) | ((u16)pccb->cmd[8]);
+
+	debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
+	      is_write ?  "write" : "read", blocks, start);
+
+	if (is_write)
+		ret = sata_write(sata, start, blocks, buffer);
+	else
+		ret = sata_read(sata, start, blocks, buffer);
+
+	return ret;
+}
+
+static char *fsl_ata_id_strcpy(u16 *target, u16 *src, int len)
+{
+	int i;
+
+	for (i = 0; i < len / 2; i++)
+		target[i] = src[i];
+
+	return (char *)target;
+}
+
+static int fsl_ata_scsiop_inquiry(struct ahci_uc_priv *uc_priv,
+				  struct scsi_cmd *pccb,
+				  fsl_sata_t *sata)
+{
+	u8 port;
+	u16 *idbuf;
+
+	ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
+
+	/* Clean ccb data buffer */
+	memset(pccb->pdata, 0, pccb->datalen);
+
+	if (pccb->datalen <= 35)
+		return 0;
+
+	/* Read id from sata */
+	port = pccb->target;
+
+	fsl_sata_identify(sata, (u16 *)tmpid);
+
+	if (!uc_priv->ataid[port]) {
+		uc_priv->ataid[port] = malloc(ATA_ID_WORDS * 2);
+		if (!uc_priv->ataid[port]) {
+			printf("%s: No memory for ataid[port]\n", __func__);
+			return -ENOMEM;
+		}
+	}
+
+	idbuf = uc_priv->ataid[port];
+
+	memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
+
+	memcpy(&pccb->pdata[8], "ATA     ", 8);
+	fsl_ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
+	fsl_ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
+
+	sata_getinfo(sata, (u16 *)idbuf);
+#ifdef DEBUG
+	ata_dump_id(idbuf);
+#endif
+	return 0;
+}
+
+/*
+ * SCSI READ CAPACITY10 command operation.
+ */
+static int fsl_ata_scsiop_read_capacity10(struct ahci_uc_priv *uc_priv,
+					  struct scsi_cmd *pccb)
+{
+	u32 cap;
+	u64 cap64;
+	u32 block_size;
+
+	if (!uc_priv->ataid[pccb->target]) {
+		printf("scsi_ahci: SCSI READ CAPACITY10 command failure.");
+		printf("\tNo ATA info!\n");
+		printf("\tPlease run SCSI command INQUIRY first!\n");
+		return -EPERM;
+	}
+
+	cap64 = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
+	if (cap64 > 0x100000000ULL)
+		cap64 = 0xffffffff;
+
+	cap = cpu_to_be32(cap64);
+	memcpy(pccb->pdata, &cap, sizeof(cap));
+
+	block_size = cpu_to_be32((u32)512);
+	memcpy(&pccb->pdata[4], &block_size, 4);
+
+	return 0;
+}
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int fsl_ata_scsiop_read_capacity16(struct ahci_uc_priv *uc_priv,
+					  struct scsi_cmd *pccb)
+{
+	u64 cap;
+	u64 block_size;
+
+	if (!uc_priv->ataid[pccb->target]) {
+		printf("scsi_ahci: SCSI READ CAPACITY16 command failure.");
+		printf("\tNo ATA info!\n");
+		printf("\tPlease run SCSI command INQUIRY first!\n");
+		return -EPERM;
+	}
+
+	cap = ata_id_n_sectors(uc_priv->ataid[pccb->target]);
+	cap = cpu_to_be64(cap);
+	memcpy(pccb->pdata, &cap, sizeof(cap));
+
+	block_size = cpu_to_be64((u64)512);
+	memcpy(&pccb->pdata[8], &block_size, 8);
+
+	return 0;
+}
+
+/*
+ * SCSI TEST UNIT READY command operation.
+ */
+static int fsl_ata_scsiop_test_unit_ready(struct ahci_uc_priv *uc_priv,
+					  struct scsi_cmd *pccb)
+{
+	return (uc_priv->ataid[pccb->target]) ? 0 : -EPERM;
+}
+
+static int fsl_ahci_scsi_exec(struct udevice *dev, struct scsi_cmd *pccb)
+{
+	struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev->parent);
+	struct fsl_ahci_priv *priv = dev_get_priv(dev->parent);
+	fsl_sata_t *sata = priv->fsl_sata;
+	int ret;
+
+	switch (pccb->cmd[0]) {
+	case SCSI_READ16:
+	case SCSI_READ10:
+		ret = fsl_scsi_exec(sata, pccb, 0);
+		break;
+	case SCSI_WRITE10:
+		ret = fsl_scsi_exec(sata, pccb, 1);
+		break;
+	case SCSI_RD_CAPAC10:
+		ret = fsl_ata_scsiop_read_capacity10(uc_priv, pccb);
+		break;
+	case SCSI_RD_CAPAC16:
+		ret = fsl_ata_scsiop_read_capacity16(uc_priv, pccb);
+		break;
+	case SCSI_TST_U_RDY:
+		ret = fsl_ata_scsiop_test_unit_ready(uc_priv, pccb);
+		break;
+	case SCSI_INQUIRY:
+		ret = fsl_ata_scsiop_inquiry(uc_priv, pccb, sata);
+		break;
+	default:
+		printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
+		return -ENOTSUPP;
+	}
+
+	if (ret) {
+		debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int fsl_ahci_probe(struct udevice *dev)
+{
+	struct fsl_ahci_priv *priv = dev_get_priv(dev);
+	struct udevice *child_dev;
+	struct scsi_platdata *uc_plat;
+
+	device_find_first_child(dev, &child_dev);
+	if (!child_dev)
+		return -ENODEV;
+	uc_plat = dev_get_uclass_platdata(child_dev);
+	uc_plat->base = priv->base;
+	uc_plat->max_lun = 1;
+	uc_plat->max_id = 1;
+
+	return init_sata(priv);
+}
+
+struct scsi_ops fsl_scsi_ops = {
+	.exec		= fsl_ahci_scsi_exec,
+};
+
+static const struct udevice_id fsl_ahci_ids[] = {
+	{ .compatible = "fsl,pq-sata-v2" },
+	{ }
+};
+
+U_BOOT_DRIVER(fsl_ahci_scsi) = {
+	.name		= "fsl_ahci_scsi",
+	.id		= UCLASS_SCSI,
+	.ops		= &fsl_scsi_ops,
+};
+
+U_BOOT_DRIVER(fsl_ahci) = {
+	.name	= "fsl_ahci",
+	.id	= UCLASS_AHCI,
+	.of_match = fsl_ahci_ids,
+	.bind	= fsl_ahci_bind,
+	.ofdata_to_platdata = fsl_ahci_ofdata_to_platdata,
+	.probe	= fsl_ahci_probe,
+	.priv_auto_alloc_size = sizeof(struct fsl_ahci_priv),
+};
diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h
index 1e2da10b02..a4ee83d187 100644
--- a/drivers/ata/fsl_sata.h
+++ b/drivers/ata/fsl_sata.h
@@ -312,6 +312,7 @@ typedef struct fsl_sata {
 	int		wcache;
 	int		flush;
 	int		flush_ext;
+	u32		dma_flag;
 } fsl_sata_t;
 
 #define READ_CMD	0