summaryrefslogtreecommitdiff
path: root/drivers/bcm570x.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-02 22:58:18 +0000
committerwdenk <wdenk>2002-11-02 22:58:18 +0000
commitcc1c8a136f9813d0a9cb9a94d2f12206873ddc4e (patch)
tree912691be4a212b399eb470411acd27c8bb6375da /drivers/bcm570x.c
parent1a4d6164af8f79c0979a2af45d7f5e5353562b19 (diff)
Initial revision
Diffstat (limited to 'drivers/bcm570x.c')
-rw-r--r--drivers/bcm570x.c1709
1 files changed, 1709 insertions, 0 deletions
diff --git a/drivers/bcm570x.c b/drivers/bcm570x.c
new file mode 100644
index 0000000000..a88880ad3f
--- /dev/null
+++ b/drivers/bcm570x.c
@@ -0,0 +1,1709 @@
+/*
+ * Broadcom BCM570x Ethernet Driver for U-Boot.
+ * Support 5701, 5702, 5703, and 5704. Single instance driver.
+ * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com)
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && (!defined(CONFIG_NET_MULTI)) && \
+ defined(CONFIG_BCM570x)
+
+#ifdef CONFIG_BMW
+#include <mpc824x.h>
+#endif
+#include <net.h>
+#include "bcm570x_mm.h"
+#include "bcm570x_autoneg.h"
+#include <pci.h>
+#include <malloc.h>
+
+
+
+/*
+ * PCI Registers and definitions.
+ */
+#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */
+#define PCI_ANY_ID (~0)
+
+/*
+ * PCI memory base for Ethernet device as well as device Interrupt.
+ */
+#define BCM570X_MBAR 0x80100000
+#define BCM570X_ILINE 1
+
+
+
+#define SECOND_USEC 1000000
+#define MAX_PACKET_SIZE 1600
+#define MAX_UNITS 4
+
+/* Globals to this module */
+int initialized = 0;
+unsigned int ioBase = 0;
+volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */
+volatile PUM_DEVICE_BLOCK pUmDevice = NULL;
+
+/* Used to pass the full-duplex flag, etc. */
+int line_speed[MAX_UNITS] = {0,0,0,0};
+static int full_duplex[MAX_UNITS] = {1,1,1,1};
+static int rx_flow_control[MAX_UNITS] = {0,0,0,0};
+static int tx_flow_control[MAX_UNITS] = {0,0,0,0};
+static int auto_flow_control[MAX_UNITS] = {0,0,0,0};
+static int tx_checksum[MAX_UNITS] = {1,1,1,1};
+static int rx_checksum[MAX_UNITS] = {1,1,1,1};
+static int auto_speed[MAX_UNITS] = {1,1,1,1};
+
+#if JUMBO_FRAMES
+/* Jumbo MTU for interfaces. */
+static int mtu[MAX_UNITS] = {0,0,0,0};
+#endif
+
+/* Turn on Wake-on lan for a device unit */
+static int enable_wol[MAX_UNITS] = {0,0,0,0};
+
+#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT
+static unsigned int tx_pkt_desc_cnt[MAX_UNITS] =
+ {TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT, TX_DESC_CNT};
+
+#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT
+static unsigned int rx_std_desc_cnt[MAX_UNITS] =
+ {RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT};
+
+static unsigned int rx_adaptive_coalesce[MAX_UNITS] = {1,1,1,1};
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT
+static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] =
+ {JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT};
+#endif
+#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS
+static unsigned int rx_coalesce_ticks[MAX_UNITS] =
+ {RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK};
+
+#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES
+static unsigned int rx_max_coalesce_frames[MAX_UNITS] =
+ {RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM};
+
+#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS
+static unsigned int tx_coalesce_ticks[MAX_UNITS] =
+ {TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK};
+
+#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES
+static unsigned int tx_max_coalesce_frames[MAX_UNITS] =
+ {TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM};
+
+#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS
+static unsigned int stats_coalesce_ticks[MAX_UNITS] =
+ {ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK};
+
+
+
+/*
+ * Legitimate values for BCM570x device types
+ */
+typedef enum {
+ BCM5700VIGIL = 0,
+ BCM5700A6,
+ BCM5700T6,
+ BCM5700A9,
+ BCM5700T9,
+ BCM5700,
+ BCM5701A5,
+ BCM5701T1,
+ BCM5701T8,
+ BCM5701A7,
+ BCM5701A10,
+ BCM5701A12,
+ BCM5701,
+ BCM5702,
+ BCM5703,
+ BCM5703A31,
+ TC996T,
+ TC996ST,
+ TC996SSX,
+ TC996SX,
+ TC996BT,
+ TC997T,
+ TC997SX,
+ TC1000T,
+ TC940BR01,
+ TC942BR01,
+ NC6770,
+ NC7760,
+ NC7770,
+ NC7780
+} board_t;
+
+/* Chip-Rev names for each device-type */
+static struct {
+ char* name;
+} chip_rev[] = {
+ {"BCM5700VIGIL"},
+ {"BCM5700A6"},
+ {"BCM5700T6"},
+ {"BCM5700A9"},
+ {"BCM5700T9"},
+ {"BCM5700"},
+ {"BCM5701A5"},
+ {"BCM5701T1"},
+ {"BCM5701T8"},
+ {"BCM5701A7"},
+ {"BCM5701A10"},
+ {"BCM5701A12"},
+ {"BCM5701"},
+ {"BCM5702"},
+ {"BCM5703"},
+ {"BCM5703A31"},
+ {"TC996T"},
+ {"TC996ST"},
+ {"TC996SSX"},
+ {"TC996SX"},
+ {"TC996BT"},
+ {"TC997T"},
+ {"TC997SX"},
+ {"TC1000T"},
+ {"TC940BR01"},
+ {"TC942BR01"},
+ {"NC6770"},
+ {"NC7760"},
+ {"NC7770"},
+ {"NC7780"},
+ {0}
+};
+
+
+/* indexed by board_t, above */
+static struct {
+ char *name;
+} board_info[] = {
+ { "Broadcom Vigil B5700 1000Base-T" },
+ { "Broadcom BCM5700 1000Base-T" },
+ { "Broadcom BCM5700 1000Base-SX" },
+ { "Broadcom BCM5700 1000Base-SX" },
+ { "Broadcom BCM5700 1000Base-T" },
+ { "Broadcom BCM5700" },
+ { "Broadcom BCM5701 1000Base-T" },
+ { "Broadcom BCM5701 1000Base-T" },
+ { "Broadcom BCM5701 1000Base-T" },
+ { "Broadcom BCM5701 1000Base-SX" },
+ { "Broadcom BCM5701 1000Base-T" },
+ { "Broadcom BCM5701 1000Base-T" },
+ { "Broadcom BCM5701" },
+ { "Broadcom BCM5702 1000Base-T" },
+ { "Broadcom BCM5703 1000Base-T" },
+ { "Broadcom BCM5703 1000Base-SX" },
+ { "3Com 3C996 10/100/1000 Server NIC" },
+ { "3Com 3C996 10/100/1000 Server NIC" },
+ { "3Com 3C996 Gigabit Fiber-SX Server NIC" },
+ { "3Com 3C996 Gigabit Fiber-SX Server NIC" },
+ { "3Com 3C996B Gigabit Server NIC" },
+ { "3Com 3C997 Gigabit Server NIC" },
+ { "3Com 3C997 Gigabit Fiber-SX Server NIC" },
+ { "3Com 3C1000 Gigabit NIC" },
+ { "3Com 3C940 Gigabit LOM (21X21)" },
+ { "3Com 3C942 Gigabit LOM (31X31)" },
+ { "Compaq NC6770 Gigabit Server Adapter" },
+ { "Compaq NC7760 Gigabit Server Adapter" },
+ { "Compaq NC7770 Gigabit Server Adapter" },
+ { "Compaq NC7780 Gigabit Server Adapter" },
+ { 0 },
+};
+
+/* PCI Devices which use the 570x chipset */
+struct pci_device_table {
+ unsigned short vendor_id, device_id; /* Vendor/DeviceID */
+ unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
+ unsigned long board_id; /* Data private to the driver */
+ int io_size, min_latency;
+} bcm570xDevices[] = {
+ {0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL ,128,32},
+ {0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6 ,128,32},
+ {0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6 ,128,32},
+ {0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9 ,128,32},
+ {0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9 ,128,32},
+ {0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700 ,128,32},
+ {0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700 ,128,32},
+ {0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700 ,128,32},
+ {0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700 ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX ,128,32},
+ {0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01 ,128,32},
+ {0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10 ,128,32},
+ {0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12 ,128,32},
+ {0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770 ,128,32},
+ {0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770 ,128,32},
+ {0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780 ,128,32},
+ {0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701 ,128,32},
+ {0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX ,128,32},
+ {0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT ,128,32},
+ {0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T ,128,32},
+ {0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01 ,128,32},
+ {0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701 ,128,32},
+ {0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32},
+ {0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32},
+ {0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32},
+ {0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32},
+ {0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32},
+ {0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32},
+ {0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32},
+ {0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32},
+ {0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780 ,128,32},
+ {0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32},
+ {0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32},
+ {0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32},
+ {0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780 ,128,32},
+ {0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32}
+};
+
+#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0]))
+
+
+
+/*
+ * Allocate a packet buffer from the bcm570x packet pool.
+ */
+void *
+bcm570xPktAlloc(int u, int pksize)
+{
+ return malloc(pksize);
+}
+
+/*
+ * Free a packet previously allocated from the bcm570x packet
+ * buffer pool.
+ */
+void
+bcm570xPktFree(int u, void *p)
+{
+ free(p);
+}
+
+int
+bcm570xReplenishRxBuffers(PUM_DEVICE_BLOCK pUmDevice)
+{
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+ void *skb;
+ int queue_rx = 0;
+ int ret = 0;
+
+ while ((pUmPacket = (PUM_PACKET)
+ QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container)) != 0) {
+
+ pPacket = (PLM_PACKET) pUmPacket;
+
+ /* reuse an old skb */
+ if (pUmPacket->skbuff) {
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ queue_rx = 1;
+ continue;
+ }
+ if ( ( skb = bcm570xPktAlloc(pUmDevice->index,
+ pPacket->u.Rx.RxBufferSize + 2)) == 0) {
+ QQ_PushHead(&pUmDevice->rx_out_of_buf_q.Container,pPacket);
+ printf("NOTICE: Out of RX memory.\n");
+ ret = 1;
+ break;
+ }
+
+ pUmPacket->skbuff = skb;
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ queue_rx = 1;
+ }
+
+ if (queue_rx) {
+ LM_QueueRxPackets(pDevice);
+ }
+
+ return ret;
+}
+
+/*
+ * Probe, Map, and Init 570x device.
+ */
+int eth_init(bd_t *bis)
+{
+ int i, rv, devFound = FALSE;
+ pci_dev_t devbusfn;
+ unsigned short status;
+
+ /* Find PCI device, if it exists, configure ... */
+ for( i = 0; i < n570xDevices; i++){
+ devbusfn = pci_find_device(bcm570xDevices[i].vendor_id,
+ bcm570xDevices[i].device_id, 0);
+ if(devbusfn == -1) {
+ continue; /* No device of that vendor/device ID */
+ } else {
+
+ /* Set ILINE */
+ pci_write_config_byte(devbusfn,
+ PCI_INTERRUPT_LINE, BCM570X_ILINE);
+
+ /*
+ * 0x10 - 0x14 define one 64-bit MBAR.
+ * 0x14 is the higher-order address bits of the BAR.
+ */
+ pci_write_config_dword(devbusfn,
+ PCI_BASE_ADDRESS_1, 0);
+
+ ioBase = BCM570X_MBAR;
+
+ pci_write_config_dword(devbusfn,
+ PCI_BASE_ADDRESS_0, ioBase);
+
+ /*
+ * Enable PCI memory, IO, and Master -- don't
+ * reset any status bits in doing so.
+ */
+ pci_read_config_word(devbusfn,
+ PCI_COMMAND, &status);
+
+ status |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+
+ pci_write_config_word(devbusfn,
+ PCI_COMMAND, status);
+
+ printf("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n",
+ board_info[bcm570xDevices[i].board_id].name,
+ PCI_BUS(devbusfn),
+ PCI_DEV(devbusfn),
+ PCI_FUNC(devbusfn),
+ ioBase);
+
+ /* Allocate once, but always clear on init */
+ if (!pDevice) {
+ pDevice = malloc(sizeof(UM_DEVICE_BLOCK));
+ pUmDevice = (PUM_DEVICE_BLOCK)pDevice;
+ memset(pDevice, 0x0, sizeof(UM_DEVICE_BLOCK));
+ }
+
+ /* Configure pci dev structure */
+ pUmDevice->pdev = devbusfn;
+ pUmDevice->index = 0;
+ pUmDevice->tx_pkt = 0;
+ pUmDevice->rx_pkt = 0;
+ devFound = TRUE;
+ break;
+ }
+ }
+
+ if(!devFound){
+ printf("eth_init: FAILURE: no BCM570x Ethernet devices found.\n");
+ return -1;
+ }
+
+ /* Setup defaults for chip */
+ pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
+
+ if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
+ pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
+ } else {
+
+ if (rx_checksum[i]) {
+ pDevice->TaskToOffload |=
+ LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
+ }
+
+ if (tx_checksum[i]) {
+ pDevice->TaskToOffload |=
+ LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
+ pDevice->NoTxPseudoHdrChksum = TRUE;
+ }
+ }
+
+ /* Set Device PCI Memory base address */
+ pDevice->pMappedMemBase = (PLM_UINT8) ioBase;
+
+ /* Pull down adapter info */
+ if ((rv = LM_GetAdapterInfo(pDevice)) != LM_STATUS_SUCCESS) {
+ printf("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv );
+ return -2;
+ }
+
+ /* Lock not needed */
+ pUmDevice->do_global_lock = 0;
+
+ if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
+ /* The 5700 chip works best without interleaved register */
+ /* accesses on certain machines. */
+ pUmDevice->do_global_lock = 1;
+ }
+
+ /* Setup timer delays */
+ if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ pDevice->UseTaggedStatus = TRUE;
+ pUmDevice->timer_interval = CFG_HZ;
+ }
+ else {
+ pUmDevice->timer_interval = CFG_HZ / 50;
+ }
+
+ /* Grab name .... */
+ pUmDevice->name =
+ (char*)malloc(strlen(board_info[bcm570xDevices[i].board_id].name)+1);
+ strcpy(pUmDevice->name,board_info[bcm570xDevices[i].board_id].name);
+
+ memcpy(pDevice->NodeAddress, bis->bi_enetaddr, 6);
+ LM_SetMacAddress(pDevice, bis->bi_enetaddr);
+ /* Init queues .. */
+ QQ_InitQueue(&pUmDevice->rx_out_of_buf_q.Container,
+ MAX_RX_PACKET_DESC_COUNT);
+ pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
+
+ /* delay for 4 seconds */
+ pUmDevice->delayed_link_ind =
+ (4 * CFG_HZ) / pUmDevice->timer_interval;
+
+ pUmDevice->adaptive_expiry =
+ CFG_HZ / pUmDevice->timer_interval;
+
+ /* Sometimes we get spurious ints. after reset when link is down. */
+ /* This field tells the isr to service the int. even if there is */
+ /* no status block update. */
+ pUmDevice->adapter_just_inited =
+ (3 * CFG_HZ) / pUmDevice->timer_interval;
+
+ /* Initialize 570x */
+ if (LM_InitializeAdapter(pDevice) != LM_STATUS_SUCCESS) {
+ printf("ERROR: Adapter initialization failed.\n");
+ return ERROR;
+ }
+
+ /* Enable chip ISR */
+ LM_EnableInterrupt(pDevice);
+
+ /* Clear MC table */
+ LM_MulticastClear(pDevice);
+
+ /* Enable Multicast */
+ LM_SetReceiveMask(pDevice,
+ pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
+
+ pUmDevice->opened = 1;
+ pUmDevice->tx_full = 0;
+ pUmDevice->tx_pkt = 0;
+ pUmDevice->rx_pkt = 0;
+ printf("eth%d: %s @0x%lx,",
+ pDevice->index, pUmDevice->name, (unsigned long)ioBase);
+ printf( "node addr ");
+ for (i = 0; i < 6; i++) {
+ printf("%2.2x", pDevice->NodeAddress[i]);
+ }
+ printf("\n");
+
+ printf("eth%d: ", pDevice->index);
+ printf("%s with ",
+ chip_rev[bcm570xDevices[i].board_id].name);
+
+ if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID)
+ printf("Broadcom BCM5400 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
+ printf("Broadcom BCM5401 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID)
+ printf("Broadcom BCM5411 Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID)
+ printf("Broadcom BCM5701 Integrated Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID)
+ printf("Broadcom BCM5703 Integrated Copper ");
+ else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID)
+ printf("Broadcom BCM8002 SerDes ");
+ else if (pDevice->EnableTbi)
+ printf("Agilent HDMP-1636 SerDes ");
+ else
+ printf("Unknown ");
+ printf("transceiver found\n");
+
+ printf("eth%d: %s, MTU: %d,",
+ pDevice->index, pDevice->BusSpeedStr, 1500);
+
+ if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) &&
+ rx_checksum[i])
+ printf("Rx Checksum ON\n");
+ else
+ printf("Rx Checksum OFF\n");
+ initialized++;
+
+ return 0;
+}
+
+/* Ethernet Interrupt service routine */
+void
+eth_isr(void)
+{
+ LM_UINT32 oldtag, newtag;
+ int i;
+
+ pUmDevice->interrupt = 1;
+
+ if (pDevice->UseTaggedStatus) {
+ if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
+ pUmDevice->adapter_just_inited) {
+ MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
+ oldtag = pDevice->pStatusBlkVirt->StatusTag;
+
+ for (i = 0; ; i++) {
+ pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
+ LM_ServiceInterrupts(pDevice);
+ newtag = pDevice->pStatusBlkVirt->StatusTag;
+ if ((newtag == oldtag) || (i > 50)) {
+ MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, newtag << 24);
+ if (pDevice->UndiFix) {
+ REG_WR(pDevice, Grc.LocalCtrl,
+ pDevice->GrcLocalCtrl | 0x2);
+ }
+ break;
+ }
+ oldtag = newtag;
+ }
+ }
+ }
+ else {
+ while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
+ unsigned int dummy;
+
+ pDevice->pMemView->Mailbox.Interrupt[0].Low = 1;
+ pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
+ LM_ServiceInterrupts(pDevice);
+ pDevice->pMemView->Mailbox.Interrupt[0].Low = 0;
+ dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low;
+ }
+ }
+
+ /* Allocate new RX buffers */
+ if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) {
+ bcm570xReplenishRxBuffers(pUmDevice);
+ }
+
+ /* Queue packets */
+ if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container)) {
+ LM_QueueRxPackets(pDevice);
+ }
+
+ if (pUmDevice->tx_queued) {
+ pUmDevice->tx_queued = 0;
+ }
+
+ if(pUmDevice->tx_full){
+ if(pDevice->LinkStatus != LM_STATUS_LINK_DOWN){
+ printf("NOTICE: tx was previously blocked, restarting MUX\n");
+ pUmDevice->tx_full = 0;
+ }
+ }
+
+ pUmDevice->interrupt = 0;
+
+}
+
+int
+eth_send(volatile void *packet, int length)
+{
+ int status = 0;
+#if ET_DEBUG
+ unsigned char* ptr = (unsigned char*)packet;
+#endif
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+
+ /* Link down, return */
+ while(pDevice->LinkStatus == LM_STATUS_LINK_DOWN) {
+#if 0
+ printf("eth%d: link down - check cable or link partner.\n",
+ pUmDevice->index);
+#endif
+ eth_isr();
+
+ /* Wait to see link for one-half a second before sending ... */
+ udelay(1500000);
+
+ }
+
+ /* Clear sent flag */
+ pUmDevice->tx_pkt = 0;
+
+ /* Previously blocked */
+ if(pUmDevice->tx_full){
+ printf("eth%d: tx blocked.\n", pUmDevice->index);
+ return 0;
+ }
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead(&pDevice->TxPacketFreeQ.Container);
+
+ if (pPacket == 0) {
+ pUmDevice->tx_full = 1;
+ printf("bcm570xEndSend: TX full!\n");
+ return 0;
+ }
+
+ if (pDevice->SendBdLeft.counter == 0) {
+ pUmDevice->tx_full = 1;
+ printf("bcm570xEndSend: no more TX descriptors!\n");
+ QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
+ return 0;
+ }
+
+ if (length <= 0){
+ printf("eth: bad packet size: %d\n", length);
+ goto out;
+ }
+
+ /* Get packet buffers and fragment list */
+ pUmPacket = (PUM_PACKET) pPacket;
+ /* Single DMA Descriptor transmit.
+ * Fragments may be provided, but one DMA descriptor max is
+ * used to send the packet.
+ */
+ if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) {
+ if (pUmPacket->skbuff == NULL){
+ /* Packet was discarded */
+ printf("TX: failed (1)\n");
+ status = 1;
+ } else{
+ printf("TX: failed (2)\n");
+ status = 2;
+ }
+ QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
+ return status;
+ }
+
+ /* Copy packet to DMA buffer */
+ memset(pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE);
+ memcpy((void*)pUmPacket->skbuff, (void*)packet, length);
+ pPacket->PacketSize = length;
+ pPacket->Flags |= SND_BD_FLAG_END|SND_BD_FLAG_COAL_NOW;
+ pPacket->u.Tx.FragCount = 1;
+ /* We've already provided a frame ready for transmission */
+ pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM;
+
+ if ( LM_SendPacket(pDevice, pPacket) == LM_STATUS_FAILURE){
+ /*
+ * A lower level send failure will push the packet descriptor back
+ * in the free queue, so just deal with the VxWorks clusters.
+ */
+ if (pUmPacket->skbuff == NULL){
+ printf("TX failed (1)!\n");
+ /* Packet was discarded */
+ status = 3;
+ } else {
+ /* A resource problem ... */
+ printf("TX failed (2)!\n");
+ status = 4;
+ }
+
+ if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) == 0) {
+ printf("TX: emptyQ!\n");
+ pUmDevice->tx_full = 1;
+ }
+ }
+
+ while(pUmDevice->tx_pkt == 0){
+ /* Service TX */
+ eth_isr();
+ }
+#if ET_DEBUG
+ printf("eth_send: 0x%x, %d bytes\n"
+ "[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n",
+ (int)pPacket, length,
+ ptr[0],ptr[1],ptr[2],ptr[3],ptr[4],ptr[5],
+ ptr[6],ptr[7],ptr[8],ptr[9],ptr[10],ptr[11],ptr[12],
+ ptr[13],ptr[14],ptr[15]);
+#endif
+ pUmDevice->tx_pkt = 0;
+ QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
+
+ /* Done with send */
+ out:
+ return status;
+}
+
+
+/* Ethernet receive */
+int
+eth_rx(void)
+{
+ PLM_PACKET pPacket = NULL;
+ PUM_PACKET pUmPacket = NULL;
+ void *skb;
+ int size=0;
+
+ while(TRUE) {
+
+ bcm570x_service_isr:
+ /* Pull down packet if it is there */
+ eth_isr();
+
+ /* Indicate RX packets called */
+ if(pUmDevice->rx_pkt){
+ /* printf("eth_rx: got a packet...\n"); */
+ pUmDevice->rx_pkt = 0;
+ } else {
+ /* printf("eth_rx: waiting for packet...\n"); */
+ goto bcm570x_service_isr;
+ }
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead(&pDevice->RxPacketReceivedQ.Container);
+
+ if (pPacket == 0){
+ printf("eth_rx: empty packet!\n");
+ goto bcm570x_service_isr;
+ }
+
+ pUmPacket = (PUM_PACKET) pPacket;
+#if ET_DEBUG
+ printf("eth_rx: packet @0x%x\n",
+ (int)pPacket);
+#endif
+ /* If the packet generated an error, reuse buffer */
+ if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) ||
+ ((size = pPacket->PacketSize) > pDevice->RxMtu)) {
+
+ /* reuse skb */
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ printf("eth_rx: error in packet dma!\n");
+ goto bcm570x_service_isr;
+ }
+
+ /* Set size and address */
+ skb = pUmPacket->skbuff;
+ size = pPacket->PacketSize;
+
+ /* Pass the packet up to the protocol
+ * layers.
+ */
+ NetReceive(skb, size);
+
+ /* Free packet buffer */
+ bcm570xPktFree (pUmDevice->index, skb);
+ pUmPacket->skbuff = NULL;
+
+ /* Reuse SKB */
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+
+ return 0; /* Got a packet, bail ... */
+ }
+ return size;
+}
+
+
+
+/* Shut down device */
+void
+eth_halt(void)
+{
+ int i;
+ if ( initialized)
+ if (pDevice && pUmDevice && pUmDevice->opened){
+ printf("\neth%d:%s,", pUmDevice->index, pUmDevice->name);
+ printf("HALT,");
+ /* stop device */
+ LM_Halt(pDevice);
+ printf("POWER DOWN,");
+ LM_SetPowerState(pDevice, LM_POWER_STATE_D3);
+
+ /* Free the memory allocated by the device in tigon3 */
+ for (i = 0; i < pUmDevice->mem_list_num; i++) {
+ if (pUmDevice->mem_list[i]) {
+ /* sanity check */
+ if (pUmDevice->dma_list[i]) { /* cache-safe memory */
+ free(pUmDevice->mem_list[i]);
+ } else {
+ free(pUmDevice->mem_list[i]); /* normal memory */
+ }
+ }
+ }
+ pUmDevice->opened = 0;
+ free(pDevice);
+ pDevice = NULL;
+ pUmDevice = NULL;
+ initialized = 0;
+ printf("done - offline.\n");
+ }
+}
+
+
+
+
+/*
+ *
+ * Middle Module: Interface between the HW driver (tigon3 modules) and
+ * the native (SENS) driver. These routines implement the system
+ * interface for tigon3 on VxWorks.
+ */
+
+/* Middle module dependency - size of a packet descriptor */
+int MM_Packet_Desc_Size = sizeof(UM_PACKET);
+
+
+LM_STATUS
+MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset,
+ LM_UINT32 *pValue32)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_read_config_dword(pUmDevice->pdev,
+ Offset, (u32 *) pValue32);
+ return LM_STATUS_SUCCESS;
+}
+
+
+LM_STATUS
+MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset,
+ LM_UINT32 Value32)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_write_config_dword(pUmDevice->pdev,
+ Offset, Value32);
+ return LM_STATUS_SUCCESS;
+}
+
+
+LM_STATUS
+MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset,
+ LM_UINT16 *pValue16)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_read_config_word(pUmDevice->pdev,
+ Offset, (u16*) pValue16);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice,
+ LM_UINT32 Offset,
+ LM_UINT16 Value16)
+{
+ UM_DEVICE_BLOCK *pUmDevice;
+ pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
+ pci_write_config_word(pUmDevice->pdev,
+ Offset, Value16);
+ return LM_STATUS_SUCCESS;
+}
+
+
+LM_STATUS
+MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
+ PLM_VOID *pMemoryBlockVirt,
+ PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
+ LM_BOOL Cached)
+{
+ PLM_VOID pvirt;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ dma_addr_t mapping;
+
+ pvirt = malloc(BlockSize);
+ mapping = (dma_addr_t)(pvirt);
+ if (!pvirt)
+ return LM_STATUS_FAILURE;
+
+ pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
+ pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping;
+ pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
+ memset(pvirt, 0, BlockSize);
+
+ *pMemoryBlockVirt = (PLM_VOID) pvirt;
+ MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping);
+
+ return LM_STATUS_SUCCESS;
+}
+
+
+
+LM_STATUS
+MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
+ PLM_VOID *pMemoryBlockVirt)
+{
+ PLM_VOID pvirt;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+
+ pvirt = malloc(BlockSize);
+
+ if (!pvirt)
+ return LM_STATUS_FAILURE;
+
+ pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
+ pUmDevice->dma_list[pUmDevice->mem_list_num] = 0;
+ pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
+ memset(pvirt, 0, BlockSize);
+ *pMemoryBlockVirt = pvirt;
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_MapMemBase(PLM_DEVICE_BLOCK pDevice)
+{
+ printf("BCM570x PCI Memory base address @0x%x\n",
+ (unsigned int)pDevice->pMappedMemBase);
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice)
+{
+ int i;
+ void* skb;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PUM_PACKET pUmPacket = NULL;
+ PLM_PACKET pPacket = NULL;
+
+ for (i = 0; i < pDevice->RxPacketDescCnt; i++) {
+ pPacket = QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
+ pUmPacket = (PUM_PACKET) pPacket;
+
+ if (pPacket == 0) {
+ printf("MM_InitializeUmPackets: Bad RxPacketFreeQ\n");
+ }
+
+ skb = bcm570xPktAlloc(pUmDevice->index,
+ pPacket->u.Rx.RxBufferSize + 2);
+
+ if (skb == 0) {
+ pUmPacket->skbuff = 0;
+ QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket);
+ printf("MM_InitializeUmPackets: out of buffer.\n");
+ continue;
+ }
+
+ pUmPacket->skbuff = skb;
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ }
+
+ pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8;
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_GetConfig(PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ int index = pDevice->index;
+
+ if (auto_speed[index] == 0)
+ pDevice->DisableAutoNeg = TRUE;
+ else
+ pDevice->DisableAutoNeg = FALSE;
+
+ if (line_speed[index] == 0) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_AUTO;
+ pDevice->DisableAutoNeg = FALSE;
+ }
+ else {
+ if (line_speed[index] == 1000) {
+ if (pDevice->EnableTbi) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX;
+ }
+ else if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX;
+ }
+ else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS;
+ }
+ if (!pDevice->EnableTbi)
+ pDevice->DisableAutoNeg = FALSE;
+ }
+ else if (line_speed[index] == 100) {
+ if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX;
+ }
+ else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS;
+ }
+ }
+ else if (line_speed[index] == 10) {
+ if (full_duplex[index]) {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX;
+ }
+ else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
+ }
+ }
+ else {
+ pDevice->RequestedMediaType =
+ LM_REQUESTED_MEDIA_TYPE_AUTO;
+ pDevice->DisableAutoNeg = FALSE;
+ }
+
+ }
+ pDevice->FlowControlCap = 0;
+ if (rx_flow_control[index] != 0) {
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ if (tx_flow_control[index] != 0) {
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ }
+ if ((auto_flow_control[index] != 0) &&
+ (pDevice->DisableAutoNeg == FALSE)) {
+
+ pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
+ if ((tx_flow_control[index] == 0) &&
+ (rx_flow_control[index] == 0)) {
+ pDevice->FlowControlCap |=
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ }
+
+ /* Default MTU for now */
+ pUmDevice->mtu = 1500;
+
+#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
+ if (pUmDevice->mtu > 1500) {
+ pDevice->RxMtu = pUmDevice->mtu;
+ pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
+ }
+ else {
+ pDevice->RxJumboDescCnt = 0;
+ }
+ pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index];
+#else
+ pDevice->RxMtu = pUmDevice->mtu;
+#endif
+
+ if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) {
+ pDevice->UseTaggedStatus = TRUE;
+ pUmDevice->timer_interval = CFG_HZ;
+ }
+ else {
+ pUmDevice->timer_interval = CFG_HZ/50;
+ }
+
+ pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
+ pDevice->RxStdDescCnt = rx_std_desc_cnt[index];
+ /* Note: adaptive coalescence really isn't adaptive in this driver */
+ pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index];
+ if (!pUmDevice->rx_adaptive_coalesce) {
+ pDevice->RxCoalescingTicks = rx_coalesce_ticks[index];
+ if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS)
+ pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS;
+ pUmDevice->rx_curr_coalesce_ticks =pDevice->RxCoalescingTicks;
+
+ pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index];
+ if (pDevice->RxMaxCoalescedFrames>MAX_RX_MAX_COALESCED_FRAMES)
+ pDevice->RxMaxCoalescedFrames =
+ MAX_RX_MAX_COALESCED_FRAMES;
+ pUmDevice->rx_curr_coalesce_frames =
+ pDevice->RxMaxCoalescedFrames;
+ pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
+ if (pDevice->StatsCoalescingTicks>MAX_STATS_COALESCING_TICKS)
+ pDevice->StatsCoalescingTicks=
+ MAX_STATS_COALESCING_TICKS;
+ }
+ else {
+ pUmDevice->rx_curr_coalesce_frames =
+ DEFAULT_RX_MAX_COALESCED_FRAMES;
+ pUmDevice->rx_curr_coalesce_ticks =
+ DEFAULT_RX_COALESCING_TICKS;
+ }
+ pDevice->TxCoalescingTicks = tx_coalesce_ticks[index];
+ if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS)
+ pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS;
+ pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index];
+ if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES)
+ pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES;
+
+ if (enable_wol[index]) {
+ pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
+ pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
+ }
+ pDevice->NicSendBd = TRUE;
+
+ /* Don't update status blocks during interrupt */
+ pDevice->RxCoalescingTicksDuringInt = 0;
+ pDevice->TxCoalescingTicksDuringInt = 0;
+
+ return LM_STATUS_SUCCESS;
+
+}
+
+
+LM_STATUS
+MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ printf("Start TX DMA: dev=%d packet @0x%x\n",
+ (int)pUmDevice->index, (unsigned int)pPacket);
+
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ printf("Complete TX DMA: dev=%d packet @0x%x\n",
+ (int)pUmDevice->index, (unsigned int)pPacket);
+ return LM_STATUS_SUCCESS;
+}
+
+
+LM_STATUS
+MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status)
+{
+ char buf[128];
+ char lcd[4];
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ LM_FLOW_CONTROL flow_control;
+
+ pUmDevice->delayed_link_ind = 0;
+ memset(lcd, 0x0, 4);
+
+ if (Status == LM_STATUS_LINK_DOWN) {
+ sprintf(buf,"eth%d: %s: NIC Link is down\n",
+ pUmDevice->index,pUmDevice->name);
+ lcd[0] = 'L';lcd[1]='N';lcd[2]='K';lcd[3] = '?';
+ } else if (Status == LM_STATUS_LINK_ACTIVE) {
+ sprintf(buf,"eth%d:%s: ", pUmDevice->index, pUmDevice->name);
+
+ if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS){
+ strcat(buf,"1000 Mbps ");
+ lcd[0] = '1';lcd[1]='G';lcd[2]='B';
+ } else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS){
+ strcat(buf,"100 Mbps ");
+ lcd[0] = '1';lcd[1]='0';lcd[2]='0';
+ } else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS){
+ strcat(buf,"10 Mbps ");
+ lcd[0] = '1';lcd[1]='0';lcd[2]=' ';
+ }
+ if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL){
+ strcat(buf, "full duplex");
+ lcd[3] = 'F';
+ } else {
+ strcat(buf, "half duplex");
+ lcd[3] = 'H';
+ }
+ strcat(buf, " link up");
+
+ flow_control = pDevice->FlowControl &
+ (LM_FLOW_CONTROL_RECEIVE_PAUSE |
+ LM_FLOW_CONTROL_TRANSMIT_PAUSE);
+
+ if (flow_control) {
+ if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
+ strcat(buf,", receive ");
+ if (flow_control & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
+ strcat(buf," & transmit ");
+ }
+ else {
+ strcat(buf,", transmit ");
+ }
+ strcat(buf,"flow control ON");
+ } else {
+ strcat(buf, ", flow control OFF");
+ }
+ strcat(buf,"\n");
+ printf("%s",buf);
+ }
+#if 0
+ sysLedDsply(lcd[0],lcd[1],lcd[2],lcd[3]);
+#endif
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PUM_PACKET pUmPacket;
+ void *skb;
+
+ pUmPacket = (PUM_PACKET) pPacket;
+
+ if ((skb = pUmPacket->skbuff))
+ bcm570xPktFree(pUmDevice->index, skb);
+
+ pUmPacket->skbuff = 0;
+
+ return LM_STATUS_SUCCESS;
+}
+
+unsigned long
+MM_AnGetCurrentTime_us(PAN_STATE_INFO pAnInfo)
+{
+ return get_timer(0);
+}
+
+/*
+ * Transform an MBUF chain into a single MBUF.
+ * This routine will fail if the amount of data in the
+ * chain overflows a transmit buffer. In that case,
+ * the incoming MBUF chain will be freed. This routine can
+ * also fail by not being able to allocate a new MBUF (including
+ * cluster and mbuf headers). In that case the failure is
+ * non-fatal. The incoming cluster chain is not freed, giving
+ * the caller the choice of whether to try a retransmit later.
+ */
+LM_STATUS
+MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
+{
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ void *skbnew;
+ int len = 0;
+
+ if (len == 0)
+ return (LM_STATUS_SUCCESS);
+
+ if (len > MAX_PACKET_SIZE){
+ printf ("eth%d: xmit frame discarded, too big!, size = %d\n",
+ pUmDevice->index, len);
+ return (LM_STATUS_FAILURE);
+ }
+
+ skbnew = bcm570xPktAlloc(pUmDevice->index, MAX_PACKET_SIZE);
+
+ if (skbnew == NULL) {
+ pUmDevice->tx_full = 1;
+ printf ("eth%d: out of transmit buffers", pUmDevice->index);
+ return (LM_STATUS_FAILURE);
+ }
+
+ /* New packet values */
+ pUmPacket->skbuff = skbnew;
+ pUmPacket->lm_packet.u.Tx.FragCount = 1;
+
+ return (LM_STATUS_SUCCESS);
+}
+
+
+LM_STATUS
+MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ pUmDevice->rx_pkt = 1;
+ return LM_STATUS_SUCCESS;
+}
+
+LM_STATUS
+MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice)
+{
+ PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
+ PLM_PACKET pPacket;
+ PUM_PACKET pUmPacket;
+ void *skb;
+ while ( TRUE ) {
+
+ pPacket = (PLM_PACKET)
+ QQ_PopHead(&pDevice->TxPacketXmittedQ.Container);
+
+ if (pPacket == 0)
+ break;
+
+ pUmPacket = (PUM_PACKET) pPacket;
+ skb = (void*)pUmPacket->skbuff;
+
+ /*
+ * Free MBLK if we transmitted a fragmented packet or a
+ * non-fragmented packet straight from the VxWorks
+ * buffer pool. If packet was copied to a local transmit
+ * buffer, then there's no MBUF to free, just free
+ * the transmit buffer back to the cluster pool.
+ */
+
+ if (skb)
+ bcm570xPktFree (pUmDevice->index, skb);
+
+ pUmPacket->skbuff = 0;
+ QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
+ pUmDevice->tx_pkt = 1;
+ }
+ if (pUmDevice->tx_full) {
+ if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) >=
+ (QQ_GetSize(&pDevice->TxPacketFreeQ.Container) >> 1))
+ pUmDevice->tx_full = 0;
+ }
+ return LM_STATUS_SUCCESS;
+}
+
+/*
+ * Scan an MBUF chain until we reach fragment number "frag"
+ * Return its length and physical address.
+ */
+void MM_MapTxDma
+ (
+ PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket,
+ T3_64BIT_HOST_ADDR *paddr,
+ LM_UINT32 *len,
+ int frag)
+{
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ *len = pPacket->PacketSize;
+ MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff);
+}
+
+/*
+ * Convert an mbuf address, a CPU local virtual address,
+ * to a physical address as seen from a PCI device. Store the
+ * result at paddr.
+ */
+void MM_MapRxDma(
+ PLM_DEVICE_BLOCK pDevice,
+ struct _LM_PACKET *pPacket,
+ T3_64BIT_HOST_ADDR *paddr)
+{
+ PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
+ MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff);
+}
+
+void
+MM_SetAddr (LM_PHYSICAL_ADDRESS *paddr, dma_addr_t addr)
+{
+#if (BITS_PER_LONG == 64)
+ paddr->High = ((unsigned long) addr) >> 32;
+ paddr->Low = ((unsigned long) addr) & 0xffffffff;
+#else
+ paddr->High = 0;
+ paddr->Low = (unsigned long) addr;
+#endif
+}
+
+void
+MM_SetT3Addr(T3_64BIT_HOST_ADDR *paddr, dma_addr_t addr)
+{
+ unsigned long baddr = (unsigned long) addr;
+#if (BITS_PER_LONG == 64)
+ set_64bit_addr(paddr, baddr & 0xffffffff, baddr >> 32);
+#else
+ set_64bit_addr(paddr, baddr, 0);
+#endif
+}
+
+/*
+ * This combination of `inline' and `extern' has almost the effect of a
+ * macro. The way to use it is to put a function definition in a header
+ * file with these keywords, and put another copy of the definition
+ * (lacking `inline' and `extern') in a library file. The definition in
+ * the header file will cause most calls to the function to be inlined.
+ * If any uses of the function remain, they will refer to the single copy
+ * in the library.
+ */
+void
+atomic_set(atomic_t* entry, int val)
+{
+ entry->counter = val;
+}
+int
+atomic_read(atomic_t* entry)
+{
+ return entry->counter;
+}
+void
+atomic_inc(atomic_t* entry)
+{
+ if(entry)
+ entry->counter++;
+}
+
+void
+atomic_dec(atomic_t* entry)
+{
+ if(entry)
+ entry->counter--;
+}
+
+void
+atomic_sub(int a, atomic_t* entry)
+{
+ if(entry)
+ entry->counter -= a;
+}
+
+void
+atomic_add(int a, atomic_t* entry)
+{
+ if(entry)
+ entry->counter += a;
+}
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+void
+QQ_InitQueue(
+PQQ_CONTAINER pQueue,
+unsigned int QueueSize) {
+ pQueue->Head = 0;
+ pQueue->Tail = 0;
+ pQueue->Size = QueueSize+1;
+ atomic_set(&pQueue->EntryCnt, 0);
+} /* QQ_InitQueue */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+char
+QQ_Full(
+PQQ_CONTAINER pQueue) {
+ unsigned int NewHead;
+
+ NewHead = (pQueue->Head + 1) % pQueue->Size;
+
+ return(NewHead == pQueue->Tail);
+} /* QQ_Full */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+char
+QQ_Empty(
+PQQ_CONTAINER pQueue) {
+ return(pQueue->Head == pQueue->Tail);
+} /* QQ_Empty */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+unsigned int
+QQ_GetSize(
+PQQ_CONTAINER pQueue) {
+ return pQueue->Size;
+} /* QQ_GetSize */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+unsigned int
+QQ_GetEntryCnt(
+PQQ_CONTAINER pQueue) {
+ return atomic_read(&pQueue->EntryCnt);
+} /* QQ_GetEntryCnt */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+char
+QQ_PushHead(
+PQQ_CONTAINER pQueue,
+PQQ_ENTRY pEntry) {
+ unsigned int Head;
+
+ Head = (pQueue->Head + 1) % pQueue->Size;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if(Head == pQueue->Tail) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[pQueue->Head] = pEntry;
+ wmb();
+ pQueue->Head = Head;
+ atomic_inc(&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushHead */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/* TRUE entry was added successfully. */
+/* FALSE queue is full. */
+/******************************************************************************/
+char
+QQ_PushTail(
+PQQ_CONTAINER pQueue,
+PQQ_ENTRY pEntry) {
+ unsigned int Tail;
+
+ Tail = pQueue->Tail;
+ if(Tail == 0) {
+ Tail = pQueue->Size;
+ } /* if */
+ Tail--;
+
+#if !defined(QQ_NO_OVERFLOW_CHECK)
+ if(Tail == pQueue->Head) {
+ return 0;
+ } /* if */
+#endif /* QQ_NO_OVERFLOW_CHECK */
+
+ pQueue->Array[Tail] = pEntry;
+ wmb();
+ pQueue->Tail = Tail;
+ atomic_inc(&pQueue->EntryCnt);
+
+ return -1;
+} /* QQ_PushTail */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY
+QQ_PopHead(
+PQQ_CONTAINER pQueue) {
+ unsigned int Head;
+ PQQ_ENTRY Entry;
+
+ Head = pQueue->Head;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if(Head == pQueue->Tail) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ if(Head == 0) {
+ Head = pQueue->Size;
+ } /* if */
+ Head--;
+
+ Entry = pQueue->Array[Head];
+ membar();
+
+ pQueue->Head = Head;
+ atomic_dec(&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopHead */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY
+QQ_PopTail(
+PQQ_CONTAINER pQueue) {
+ unsigned int Tail;
+ PQQ_ENTRY Entry;
+
+ Tail = pQueue->Tail;
+
+#if !defined(QQ_NO_UNDERFLOW_CHECK)
+ if(Tail == pQueue->Head) {
+ return (PQQ_ENTRY) 0;
+ } /* if */
+#endif /* QQ_NO_UNDERFLOW_CHECK */
+
+ Entry = pQueue->Array[Tail];
+ membar();
+ pQueue->Tail = (Tail + 1) % pQueue->Size;
+ atomic_dec(&pQueue->EntryCnt);
+
+ return Entry;
+} /* QQ_PopTail */
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY
+QQ_GetHead(
+ PQQ_CONTAINER pQueue,
+ unsigned int Idx)
+{
+ if(Idx >= atomic_read(&pQueue->EntryCnt))
+ {
+ return (PQQ_ENTRY) 0;
+ }
+
+ if(pQueue->Head > Idx)
+ {
+ Idx = pQueue->Head - Idx;
+ }
+ else
+ {
+ Idx = pQueue->Size - (Idx - pQueue->Head);
+ }
+ Idx--;
+
+ return pQueue->Array[Idx];
+}
+
+
+
+/******************************************************************************/
+/* Description: */
+/* */
+/* Return: */
+/******************************************************************************/
+PQQ_ENTRY
+QQ_GetTail(
+ PQQ_CONTAINER pQueue,
+ unsigned int Idx)
+{
+ if(Idx >= atomic_read(&pQueue->EntryCnt))
+ {
+ return (PQQ_ENTRY) 0;
+ }
+
+ Idx += pQueue->Tail;
+ if(Idx >= pQueue->Size)
+ {
+ Idx = Idx - pQueue->Size;
+ }
+
+ return pQueue->Array[Idx];
+}
+
+#endif /* CFG_CMD_NET, !CONFIG_NET_MULTI, CONFIG_BCM570x */