diff options
| author | Ruchika Gupta <ruchika.gupta@nxp.com> | 2017-04-17 18:07:19 +0530 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2017-04-17 09:03:30 -0700 |
| commit | 511fc86d0b1b603532056c663c22b91056908755 (patch) | |
| tree | 77b312a5c3ec2746c6315d671975b329fa1d03f6 /drivers/crypto | |
| parent | 762f92a60e1f02c2597500766f86e4e3fb145b21 (diff) | |
arm: ls1046ardb: Add SD secure boot target
- Add SD secure boot target for ls1046ardb.
- Change the u-boot size defined by a macro for copying the main
U-Boot by SPL to also include the u-boot Secure Boot header size
as header is appended to u-boot image. So header will also be
copied from SD to DDR.
- CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM
(128K) where 32K are reserved for use by boot ROM and 6K for the
header.
- Reduce the size of CAAM driver for SPL Blobification functions
and descriptors, that are not required at the time of SPL are
disabled. Further error code conversion to strings is disabled
for SPL build.
Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'drivers/crypto')
| -rw-r--r-- | drivers/crypto/fsl/jobdesc.c | 4 | ||||
| -rw-r--r-- | drivers/crypto/fsl/jr.c | 19 |
2 files changed, 12 insertions, 11 deletions
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 6125bbb558..375ff9d0e3 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -204,7 +204,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } - +#ifndef CONFIG_SPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) @@ -252,7 +252,7 @@ void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr, append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB); } - +#endif /* * Descriptor to instantiate RNG State Handle 0 in normal mode and * load the JDKEK, TDKEK and TDSK registers diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 1b882291e4..163e729961 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -342,7 +342,9 @@ static void desc_done(uint32_t status, void *arg) { struct result *x = arg; x->status = status; +#ifndef CONFIG_SPL_BUILD caam_jr_strstatus(status); +#endif x->done = 1; } @@ -436,7 +438,11 @@ static inline int sec_reset_idx(uint8_t sec_idx) return 0; } - +int sec_reset(void) +{ + return sec_reset_idx(0); +} +#ifndef CONFIG_SPL_BUILD static int instantiate_rng(uint8_t sec_idx) { struct result op; @@ -472,11 +478,6 @@ static int instantiate_rng(uint8_t sec_idx) return ret; } -int sec_reset(void) -{ - return sec_reset_idx(0); -} - static u8 get_rng_vid(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -561,7 +562,7 @@ static int rng_init(uint8_t sec_idx) return ret; } - +#endif int sec_init_idx(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -634,7 +635,7 @@ int sec_init_idx(uint8_t sec_idx) pamu_enable(); #endif - +#ifndef CONFIG_SPL_BUILD if (get_rng_vid(sec_idx) >= 4) { if (rng_init(sec_idx) < 0) { printf("SEC%u: RNG instantiation failed\n", sec_idx); @@ -642,7 +643,7 @@ int sec_init_idx(uint8_t sec_idx) } printf("SEC%u: RNG instantiated\n", sec_idx); } - +#endif return ret; } |