diff options
| author | Fabio Estevam <festevam@gmail.com> | 2019-12-11 17:37:09 -0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-12-27 12:14:25 +0100 |
| commit | 0d3bc81391ac031758affdb0811bc9c8b905978c (patch) | |
| tree | 5866d3722ea4d9b7926e1cf136e6992cddcd334e /drivers/ddr/imx | |
| parent | 89c832cfe7b63c074583cbd6a582ccede6f437b2 (diff) | |
imx8m: ddr_init: Move ddr_init() messages to debug level
Currently inside ddr_init() there is a mix of printf() and debug()
level messages.
Since this type of information is useful for debug purposes,
convert all of them to debug level for consistency.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'drivers/ddr/imx')
| -rw-r--r-- | drivers/ddr/imx/imx8m/ddr_init.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c index d6e915c9b9..21af66e4e7 100644 --- a/drivers/ddr/imx/imx8m/ddr_init.c +++ b/drivers/ddr/imx/imx8m/ddr_init.c @@ -24,7 +24,7 @@ void ddr_init(struct dram_timing_info *dram_timing) { unsigned int tmp, initial_drate, target_freq; - printf("DDRINFO: start DRAM init\n"); + debug("DDRINFO: start DRAM init\n"); /* Step1: Follow the power up procedure */ if (is_imx8mq()) { @@ -109,7 +109,7 @@ void ddr_init(struct dram_timing_info *dram_timing) tmp = reg32_read(DDRPHY_CalBusy(0)); } while ((tmp & 0x1)); - printf("DDRINFO:ddrphy calibration done\n"); + debug("DDRINFO:ddrphy calibration done\n"); /* Step15: Set SWCTL.sw_done to 0 */ reg32_write(DDRC_SWCTL(0), 0x00000000); @@ -161,7 +161,7 @@ void ddr_init(struct dram_timing_info *dram_timing) /* enable port 0 */ reg32_write(DDRC_PCTRL_0(0), 0x00000001); - printf("DDRINFO: ddrmix config done\n"); + debug("DDRINFO: ddrmix config done\n"); /* save the dram timing config into memory */ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE); |