firmware: ti_sci: Add support for processor control services

TI-SCI message protocol provides support for controlling of various
physical cores available in SoC. In order to control which host is
capable of controlling a physical processor core, there is a processor
access control list that needs to be populated as part of the board
configuration data.

Introduce support for the set of TI-SCI message protocol apis that
provide us with this capability of controlling physical cores.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

1 files changed, 371 insertions, 0 deletions

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 1a78b7d0dc..9148126041 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1441,6 +1441,368 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
 	return ret;
 }
 
+/**
+ * ti_sci_cmd_proc_request() - Command to request a physical processor control
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle,
+				   u8 proc_id)
+{
+	struct ti_sci_msg_req_proc_request req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_REQUEST,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_release() - Command to release a physical processor control
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle,
+				   u8 proc_id)
+{
+	struct ti_sci_msg_req_proc_release req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_RELEASE,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_handover() - Command to handover a physical processor
+ *				control to a host in the processor's access
+ *				control list.
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ * @host_id:	Host ID to get the control of the processor
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle,
+				    u8 proc_id, u8 host_id)
+{
+	struct ti_sci_msg_req_proc_handover req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_HANDOVER,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+	req.host_id = host_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_set_proc_boot_cfg() - Command to set the processor boot
+ *				    configuration flags
+ * @handle:		Pointer to TI SCI handle
+ * @proc_id:		Processor ID this request is for
+ * @config_flags_set:	Configuration flags to be set
+ * @config_flags_clear:	Configuration flags to be cleared.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_proc_boot_cfg(const struct ti_sci_handle *handle,
+					u8 proc_id, u64 bootvector,
+					u32 config_flags_set,
+					u32 config_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_config req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CONFIG,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+	req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK;
+	req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+	req.config_flags_set = config_flags_set;
+	req.config_flags_clear = config_flags_clear;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_set_proc_boot_ctrl() - Command to set the processor boot
+ *				     control flags
+ * @handle:			Pointer to TI SCI handle
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_set_proc_boot_ctrl(const struct ti_sci_handle *handle,
+					 u8 proc_id, u32 control_flags_set,
+					 u32 control_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_ctrl req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CTRL,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+	req.control_flags_set = control_flags_set;
+	req.control_flags_clear = control_flags_clear;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_auth_boot_image() - Command to authenticate and load the
+ *			image and then set the processor configuration flags.
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ * @cert_addr:	Memory address at which payload image certificate is located.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_auth_boot_image(const struct ti_sci_handle *handle,
+					   u8 proc_id, u64 cert_addr)
+{
+	struct ti_sci_msg_req_proc_auth_boot_image req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_AUTH_BOOT_IMIAGE,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+	req.cert_addr_low = cert_addr & TISCI_ADDR_LOW_MASK;
+	req.cert_addr_high = (cert_addr & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_proc_boot_status() - Command to get the processor boot status
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle,
+					   u8 proc_id, u64 *bv, u32 *cfg_flags,
+					   u32 *ctrl_flags, u32 *sts_flags)
+{
+	struct ti_sci_msg_resp_get_proc_boot_status *resp;
+	struct ti_sci_msg_req_get_proc_boot_status req;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_GET_PROC_BOOT_STATUS,
+				     TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				     (u32 *)&req, sizeof(req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+		return ret;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_proc_boot_status *)
+							xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		return -ENODEV;
+	*bv = (resp->bootvector_low & TISCI_ADDR_LOW_MASK) |
+			(((u64)resp->bootvector_high  <<
+			  TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK);
+	*cfg_flags = resp->config_flags;
+	*ctrl_flags = resp->control_flags;
+	*sts_flags = resp->status_flags;
+
+	return ret;
+}
+
 /*
  * ti_sci_setup_ops() - Setup the operations structures
  * @info:	pointer to TISCI pointer
@@ -1452,6 +1814,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	struct ti_sci_dev_ops *dops = &ops->dev_ops;
 	struct ti_sci_clk_ops *cops = &ops->clk_ops;
 	struct ti_sci_core_ops *core_ops = &ops->core_ops;
+	struct ti_sci_proc_ops *pops = &ops->proc_ops;
 
 	bops->board_config = ti_sci_cmd_set_board_config;
 	bops->board_config_rm = ti_sci_cmd_set_board_config_rm;
@@ -1486,6 +1849,14 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	cops->get_freq = ti_sci_cmd_clk_get_freq;
 
 	core_ops->reboot_device = ti_sci_cmd_core_reboot;
+
+	pops->proc_request = ti_sci_cmd_proc_request;
+	pops->proc_release = ti_sci_cmd_proc_release;
+	pops->proc_handover = ti_sci_cmd_proc_handover;
+	pops->set_proc_boot_cfg = ti_sci_cmd_set_proc_boot_cfg;
+	pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl;
+	pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image;
+	pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status;
 }
 
 /**