fpga: xilinx: Simplify load/dump/info function handling

Connect FPGA version with appropriate operations
to remove huge switch-cases for every FPGA family.
Tested on Zynq. Spartan2/Spartan3/Virtex2 just compile test.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

1 files changed, 7 insertions, 152 deletions

diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index b0e9cb35a3..8837f5c122 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -19,17 +19,6 @@
 #include <spartan3.h>
 #include <zynqpl.h>
 
-#if 0
-#define FPGA_DEBUG
-#endif
-
-/* Define FPGA_DEBUG to get debug printf's */
-#ifdef	FPGA_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
 /* Local Static Functions */
 static int xilinx_validate(xilinx_desc *desc, char *fn);
 
@@ -143,116 +132,22 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size)
 
 int xilinx_load(xilinx_desc *desc, const void *buf, size_t bsize)
 {
-	int ret_val = FPGA_FAIL;	/* assume a failure */
-
 	if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
 		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
-	} else
-		switch (desc->family) {
-		case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
-			PRINTF ("%s: Launching the Spartan-II Loader...\n",
-					__FUNCTION__);
-			ret_val = spartan2_load(desc, buf, bsize);
-#else
-			printf ("%s: No support for Spartan-II devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
-			PRINTF ("%s: Launching the Spartan-III Loader...\n",
-					__FUNCTION__);
-			ret_val = spartan3_load(desc, buf, bsize);
-#else
-			printf ("%s: No support for Spartan-III devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_virtex2:
-#if defined(CONFIG_FPGA_VIRTEX2)
-			PRINTF ("%s: Launching the Virtex-II Loader...\n",
-					__FUNCTION__);
-			ret_val = virtex2_load(desc, buf, bsize);
-#else
-			printf ("%s: No support for Virtex-II devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
-			PRINTF("%s: Launching the Zynq PL Loader...\n",
-			       __func__);
-			ret_val = zynq_load(desc, buf, bsize);
-#else
-			printf("%s: No support for Zynq devices.\n",
-			       __func__);
-#endif
-			break;
-
-		default:
-			printf ("%s: Unsupported family type, %d\n",
-					__FUNCTION__, desc->family);
-		}
+		return FPGA_FAIL;
+	}
 
-	return ret_val;
+	return desc->operations->load(desc, buf, bsize);
 }
 
 int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize)
 {
-	int ret_val = FPGA_FAIL;	/* assume a failure */
-
 	if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
 		printf ("%s: Invalid device descriptor\n", __FUNCTION__);
-	} else
-		switch (desc->family) {
-		case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
-			PRINTF ("%s: Launching the Spartan-II Reader...\n",
-					__FUNCTION__);
-			ret_val = spartan2_dump(desc, buf, bsize);
-#else
-			printf ("%s: No support for Spartan-II devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
-			PRINTF ("%s: Launching the Spartan-III Reader...\n",
-					__FUNCTION__);
-			ret_val = spartan3_dump(desc, buf, bsize);
-#else
-			printf ("%s: No support for Spartan-III devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_virtex2:
-#if defined( CONFIG_FPGA_VIRTEX2)
-			PRINTF ("%s: Launching the Virtex-II Reader...\n",
-					__FUNCTION__);
-			ret_val = virtex2_dump(desc, buf, bsize);
-#else
-			printf ("%s: No support for Virtex-II devices.\n",
-					__FUNCTION__);
-#endif
-			break;
-		case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
-			PRINTF("%s: Launching the Zynq PL Reader...\n",
-			       __func__);
-			ret_val = zynq_dump(desc, buf, bsize);
-#else
-			printf("%s: No support for Zynq devices.\n",
-			       __func__);
-#endif
-			break;
-
-		default:
-			printf ("%s: Unsupported family type, %d\n",
-					__FUNCTION__, desc->family);
-		}
+		return FPGA_FAIL;
+	}
 
-	return ret_val;
+	return desc->operations->dump(desc, buf, bsize);
 }
 
 int xilinx_info(xilinx_desc *desc)
@@ -315,47 +210,7 @@ int xilinx_info(xilinx_desc *desc)
 
 		if (desc->iface_fns) {
 			printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
-			switch (desc->family) {
-			case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
-				spartan2_info(desc);
-#else
-				/* just in case */
-				printf ("%s: No support for Spartan-II devices.\n",
-						__FUNCTION__);
-#endif
-				break;
-			case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
-				spartan3_info(desc);
-#else
-				/* just in case */
-				printf ("%s: No support for Spartan-III devices.\n",
-						__FUNCTION__);
-#endif
-				break;
-			case xilinx_virtex2:
-#if defined(CONFIG_FPGA_VIRTEX2)
-				virtex2_info(desc);
-#else
-				/* just in case */
-				printf ("%s: No support for Virtex-II devices.\n",
-						__FUNCTION__);
-#endif
-				break;
-			case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
-				zynq_info(desc);
-#else
-				/* just in case */
-				printf("%s: No support for Zynq devices.\n",
-				       __func__);
-#endif
-				/* Add new family types here */
-			default:
-				/* we don't need a message here - we give one up above */
-				;
-			}
+			desc->operations->info(desc);
 		} else
 			printf ("No Device Function Table.\n");