diff options
| author | Stephen Warren <swarren@nvidia.com> | 2014-04-22 14:37:53 -0600 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2014-05-13 10:41:31 -0700 |
| commit | eceb3f26f407d65dae3902180b3c9f3128f0f349 (patch) | |
| tree | fa5130637f363cf3735b40355edf0bbe6defa32d /drivers/gpio/tegra_gpio.c | |
| parent | 4a68d3431ace189746ffb498dc9e844296626615 (diff) | |
ARM: tegra: add GPIO initialization table function
The HW-defined procedure for booting Tegra requires that some pins be
set up as GPIOs immediately at boot in order to avoid glitches on those
pins, when the pinmux is programmed. Add a feature to the GPIO driver
which executes a GPIO configuration table. Board files will use this to
implement the correct HW initialization procedure.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'drivers/gpio/tegra_gpio.c')
| -rw-r--r-- | drivers/gpio/tegra_gpio.c | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 82b30d5ab6..fea9d17f8e 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -221,6 +221,26 @@ int gpio_set_value(unsigned gpio, int value) return 0; } +void gpio_config_table(const struct tegra_gpio_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) { + switch (config[i].init) { + case TEGRA_GPIO_INIT_IN: + gpio_direction_input(config[i].gpio); + break; + case TEGRA_GPIO_INIT_OUT0: + gpio_direction_output(config[i].gpio, 0); + break; + case TEGRA_GPIO_INIT_OUT1: + gpio_direction_output(config[i].gpio, 1); + break; + } + set_config(config[i].gpio, 1); + } +} + /* * Display Tegra GPIO information */ |