diff options
| author | Rostislav Lisovy <lisovy@gmail.com> | 2014-09-09 15:54:30 +0200 |
|---|---|---|
| committer | Scott Wood <scottwood@freescale.com> | 2014-09-25 13:43:00 -0500 |
| commit | 2f665945b39a9972260cbcf60d5e7f2a60587f5e (patch) | |
| tree | 42d1615242c1f74862e56a66f6137697c32ef39c /drivers/mtd/nand/am335x_spl_bch.c | |
| parent | e3a4facdfc07179ebe017a07b8de6224a935a9f3 (diff) | |
mtd: nand: am335x: Fix 'bit-flip' errors in SPL
OMAP GPMC driver used with some NAND Flash devices
(e.g. Spansion S34ML08G1) causes that U-boot shows
hundreds of 'nand: bit-flip corrected' error messages.
Possible cause was discussed in the mailinglist thread:
http://lists.denx.de/pipermail/u-boot/2014-April/177508.html
The issue was partially fixed with the cc81a5291910d7a.git
however this has to be done to fix the SPL.
The original author of the code is Belisko Marek
<marek.belisko@gmail.com>
Signed-off-by: Rostislav Lisovy <lisovy@merica.cz>
Diffstat (limited to 'drivers/mtd/nand/am335x_spl_bch.c')
| -rw-r--r-- | drivers/mtd/nand/am335x_spl_bch.c | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c index ce65d8e12b..bf8b2ee16a 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -64,14 +64,18 @@ static int nand_command(int block, int page, uint32_t offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), + if (cmd != NAND_CMD_RNDOUT) { + hwctrl(&nand_info[0], (page_addr & 0xff), + NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE - /* One more address cycle for devices > 128MiB */ - hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, + /* One more address cycle for devices > 128MiB */ + hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif + } + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_READ0) { |