diff options
| author | Nick Thompson <nick.thompson@gefanuc.com> | 2009-12-12 12:12:26 -0500 |
|---|---|---|
| committer | Tom Rix <Tom.Rix@windriver.com> | 2010-01-04 08:48:17 -0600 |
| commit | 97f4eb8cfb97c7c5b158e3c0df4611efbf50f403 (patch) | |
| tree | 61fc8af5589184dd825d70659b7e5c8491e369d3 /drivers/mtd/nand | |
| parent | 90110e0eab5ac6ab714109ce1fd8873c858dd552 (diff) | |
Davinci: Configurable NAND chip selects
Davinci: Configurable NAND chip selects
Add a CONFIG_SYS_NAND_CS setting to all davinci configs and
use it to setup the NAND controller in the davinci_nand
mtd driver.
Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
Diffstat (limited to 'drivers/mtd/nand')
| -rw-r--r-- | drivers/mtd/nand/davinci_nand.c | 25 |
1 files changed, 11 insertions, 14 deletions
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 41a95685f6..1ad802a61d 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -82,26 +82,20 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int c static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) { - int dummy; + u_int32_t val; - dummy = emif_regs->NANDF1ECC; + (void)readl(&(emif_regs->NANDFECC[CONFIG_SYS_NAND_CS - 2])); - /* FIXME: only chipselect 0 is supported for now */ - emif_regs->NANDFCR |= 1 << 8; + val = readl(&emif_regs->NANDFCR); + val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS); + writel(val, &emif_regs->NANDFCR); } static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) { u_int32_t ecc = 0; - if (region == 1) - ecc = emif_regs->NANDF1ECC; - else if (region == 2) - ecc = emif_regs->NANDF2ECC; - else if (region == 3) - ecc = emif_regs->NANDF3ECC; - else if (region == 4) - ecc = emif_regs->NANDF4ECC; + ecc = readl(&(emif_regs->NANDFECC[region - 1])); return(ecc); } @@ -223,8 +217,11 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) * Start a new ECC calculation for reading or writing 512 bytes * of data. */ - val = (emif_regs->NANDFCR & ~(3 << 4)) | (1 << 12); - emif_regs->NANDFCR = val; + val = readl(&emif_regs->NANDFCR); + val &= ~DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK; + val |= DAVINCI_NANDFCR_4BIT_ECC_SEL(CONFIG_SYS_NAND_CS); + val |= DAVINCI_NANDFCR_4BIT_ECC_START; + writel(val, &emif_regs->NANDFCR); break; case NAND_ECC_READSYN: val = emif_regs->NAND4BITECC1; |