Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/armv7/rmobile/Makefile
	doc/README.scrapyard

Needed manual fix:
	arch/arm/cpu/armv7/omap-common/Makefile
	board/compulab/cm_t335/u-boot.lds

7 files changed, 530 insertions, 153 deletions

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index eb1eafaf06..e145cd1842 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
 obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
 obj-$(CONFIG_NAND_PLAT) += nand_plat.o
 obj-$(CONFIG_NAND_DOCG4) += docg4.o
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99fc86c8db..05ddfbb644 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -411,7 +411,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+		dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
 		return -1;
 	}
 
@@ -451,7 +451,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			*(buf + byte_pos) ^= (1 << bit_pos);
 
 			pos = sector_num * host->pmecc_sector_size + byte_pos;
-			printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
 			/* Bit flip in OOB area */
@@ -461,7 +461,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			ecc[tmp] ^= (1 << bit_pos);
 
 			pos = tmp + nand_chip->ecc.layout->eccpos[0];
-			printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
 
@@ -499,7 +499,7 @@ normal_check:
 
 			err_nbr = pmecc_err_location(mtd);
 			if (err_nbr == -1) {
-				printk(KERN_ERR "PMECC: Too many errors\n");
+				dev_err(host->dev, "PMECC: Too many errors\n");
 				mtd->ecc_stats.failed++;
 				return -EIO;
 			} else {
@@ -543,7 +543,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+		dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
 		return -1;
 	}
 
@@ -583,7 +583,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+		dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
 		goto out;
 	}
 
@@ -826,6 +826,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 	switch (mtd->writesize) {
 	case 2048:
 	case 4096:
+	case 8192:
 		host->pmecc_degree = (sector_size == 512) ?
 			PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
 		host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
@@ -839,8 +840,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 		nand->ecc.steps = 1;
 		nand->ecc.bytes = host->pmecc_bytes_per_sector *
 				       host->pmecc_sector_number;
+
+		if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+			dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+					MTD_MAX_ECCPOS_ENTRIES_LARGE);
+			return -EINVAL;
+		}
+
 		if (nand->ecc.bytes > mtd->oobsize - 2) {
-			printk(KERN_ERR "No room for ECC bytes\n");
+			dev_err(host->dev, "No room for ECC bytes\n");
 			return -EINVAL;
 		}
 		pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
@@ -851,7 +859,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 	case 512:
 	case 1024:
 		/* TODO */
-		printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+		dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
 	default:
 		/* page size not handled by HW ECC */
 		/* switching back to soft ECC */
@@ -1034,7 +1042,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* it doesn't seems to be a freshly
 		 * erased block.
 		 * We can't correct so many errors */
-		printk(KERN_WARNING "atmel_nand : multiple errors detected."
+		dev_warn(host->dev, "atmel_nand : multiple errors detected."
 				" Unable to correct.\n");
 		return -EIO;
 	}
@@ -1044,12 +1052,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* there's nothing much to do here.
 		 * the bit error is on the ECC itself.
 		 */
-		printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+		dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
 				" Nothing to correct\n");
 		return 0;
 	}
 
-	printk(KERN_WARNING "atmel_nand : one bit error on data."
+	dev_warn(host->dev, "atmel_nand : one bit error on data."
 			" (word offset in the page :"
 			" 0x%x bit offset : 0x%x)\n",
 			ecc_word, ecc_bit);
@@ -1061,7 +1069,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* 8 bits words */
 		dat[ecc_word] ^= (1 << ecc_bit);
 	}
-	printk(KERN_WARNING "atmel_nand : error corrected\n");
+	dev_warn(host->dev, "atmel_nand : error corrected\n");
 	return 1;
 }
 
@@ -1176,7 +1184,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 	mtd->priv = nand;
 	nand->IO_ADDR_R = nand->IO_ADDR_W = (void  __iomem *)base_addr;
 
+#ifdef CONFIG_NAND_ECC_BCH
+	nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
 	nand->ecc.mode = NAND_ECC_SOFT;
+#endif
 #ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
@@ -1184,7 +1196,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	nand->dev_ready = at91_nand_ready;
 #endif
-	nand->chip_delay = 20;
+	nand->chip_delay = 75;
 
 	ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
 	if (ret)
@@ -1212,6 +1224,6 @@ void board_nand_init(void)
 	int i;
 	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
 		if (atmel_nand_chip_init(i, base_addr[i]))
-			printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+			dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
 				i);
 }
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 98a09c0641..1808a7ffba 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -17,7 +17,7 @@
 
 #include <asm/io.h>
 #include <asm/errno.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 
 #define FSL_IFC_V1_1_0	0x01010000
 #define MAX_BANKS	4
@@ -125,6 +125,69 @@ static struct nand_ecclayout oob_4096_ecc8 = {
 	.oobfree = { {2, 6}, {136, 82} },
 };
 
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+	.eccbytes = 128,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+	},
+	.oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+	.eccbytes = 256,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+		136, 137, 138, 139, 140, 141, 142, 143,
+		144, 145, 146, 147, 148, 149, 150, 151,
+		152, 153, 154, 155, 156, 157, 158, 159,
+		160, 161, 162, 163, 164, 165, 166, 167,
+		168, 169, 170, 171, 172, 173, 174, 175,
+		176, 177, 178, 179, 180, 181, 182, 183,
+		184, 185, 186, 187, 188, 189, 190, 191,
+		192, 193, 194, 195, 196, 197, 198, 199,
+		200, 201, 202, 203, 204, 205, 206, 207,
+		208, 209, 210, 211, 212, 213, 214, 215,
+		216, 217, 218, 219, 220, 221, 222, 223,
+		224, 225, 226, 227, 228, 229, 230, 231,
+		232, 233, 234, 235, 236, 237, 238, 239,
+		240, 241, 242, 243, 244, 245, 246, 247,
+		248, 249, 250, 251, 252, 253, 254, 255,
+		256, 257, 258, 259, 260, 261, 262, 263,
+	},
+	.oobfree = { {2, 6}, {264, 80} },
+};
 
 /*
  * Generic flash bbt descriptors
@@ -428,20 +491,27 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		if (mtd->writesize > 512) {
 			nand_fcr0 =
 				(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
-				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+				(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
 
 			out_be32(&ifc->ifc_nand.nand_fir0,
 				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
 				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
 				 (IFC_FIR_OP_WBCD  << IFC_NAND_FIR0_OP3_SHIFT) |
-				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
-			out_be32(&ifc->ifc_nand.nand_fir1, 0);
+				 (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
+			out_be32(&ifc->ifc_nand.nand_fir1,
+				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
 		} else {
 			nand_fcr0 = ((NAND_CMD_PAGEPROG <<
 					IFC_NAND_FCR0_CMD1_SHIFT) |
 				    (NAND_CMD_SEQIN <<
-					IFC_NAND_FCR0_CMD2_SHIFT));
+					IFC_NAND_FCR0_CMD2_SHIFT) |
+				    (NAND_CMD_STATUS <<
+					IFC_NAND_FCR0_CMD3_SHIFT));
 
 			out_be32(&ifc->ifc_nand.nand_fir0,
 				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -450,7 +520,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
 				 (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
 			out_be32(&ifc->ifc_nand.nand_fir1,
-				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+				 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP7_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
 
 			if (column >= mtd->writesize)
 				nand_fcr0 |=
@@ -902,6 +976,21 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 		priv->bufnum_mask = 1;
 		break;
 
+	case CSOR_NAND_PGS_8K:
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+		    CSOR_NAND_ECC_MODE_4) {
+			layout = &oob_8192_ecc4;
+			nand->ecc.strength = 4;
+		} else {
+			layout = &oob_8192_ecc8;
+			nand->ecc.strength = 8;
+			nand->ecc.bytes = 16;
+		}
+
+		priv->bufnum_mask = 0;
+		break;
+
+
 	default:
 		printf("ifc nand: bad csor %#x: bad page size\n", csor);
 		return -ENODEV;
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index d4622653fa..9de327ba4d 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -9,7 +9,7 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <linux/mtd/nand.h>
 
 static inline int is_blank(uchar *addr, int page_size)
@@ -112,10 +112,13 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 
 	port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
 
-	if (csor & CSOR_NAND_PGS_4K) {
+	if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
+		page_size = 8192;
+		bufnum_mask = 0x0;
+	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
 		page_size = 4096;
 		bufnum_mask = 0x1;
-	} else if (csor & CSOR_NAND_PGS_2K) {
+	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
 		page_size = 2048;
 		bufnum_mask = 0x3;
 	} else {
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
new file mode 100644
index 0000000000..2aa7807f3e
--- /dev/null
+++ b/drivers/mtd/nand/omap_elm.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
+ * Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * BCH Error Location Module (ELM) support.
+ *
+ * NOTE:
+ * 1. Supports only continuous mode. Dont see need for page mode in uboot
+ * 2. Supports only syndrome polynomial 0. i.e. poly local variable is
+ *    always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
+ *    sets in uboot
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/omap_gpmc.h>
+#include <asm/omap_elm.h>
+
+#define ELM_DEFAULT_POLY (0)
+
+struct elm *elm_cfg;
+
+/**
+ * elm_load_syndromes - Load BCH syndromes based on nibble selection
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @poly: Syndrome Polynomial set to use
+ *
+ * Load BCH syndromes based on nibble selection
+ */
+static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
+{
+	u32 *ptr;
+	u32 val;
+
+	/* reg 0 */
+	ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
+	val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
+				(syndrome[3] << 24);
+	writel(val, ptr);
+	/* reg 1 */
+	ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
+	val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
+				(syndrome[7] << 24);
+	writel(val, ptr);
+
+	/* BCH 8-bit with 26 nibbles (4*8=32) */
+	if (nibbles > 13) {
+		/* reg 2 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
+		val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
+				(syndrome[11] << 24);
+		writel(val, ptr);
+		/* reg 3 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
+		val = syndrome[12] | (syndrome[13] << 8) |
+			(syndrome[14] << 16) | (syndrome[15] << 24);
+		writel(val, ptr);
+	}
+
+	/* BCH 16-bit with 52 nibbles (7*8=56) */
+	if (nibbles > 26) {
+		/* reg 4 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
+		val = syndrome[16] | (syndrome[17] << 8) |
+			(syndrome[18] << 16) | (syndrome[19] << 24);
+		writel(val, ptr);
+
+		/* reg 5 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
+		val = syndrome[20] | (syndrome[21] << 8) |
+			(syndrome[22] << 16) | (syndrome[23] << 24);
+		writel(val, ptr);
+
+		/* reg 6 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
+		val = syndrome[24] | (syndrome[25] << 8) |
+			(syndrome[26] << 16) | (syndrome[27] << 24);
+		writel(val, ptr);
+	}
+}
+
+/**
+ * elm_check_errors - Check for BCH errors and return error locations
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @error_count: Returns number of errrors in the syndrome
+ * @error_locations: Returns error locations (in decimal) in this array
+ *
+ * Check the provided syndrome for BCH errors and return error count
+ * and locations in the array passed. Returns -1 if error is not correctable,
+ * else returns 0
+ */
+int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+		u32 *error_locations)
+{
+	u8 poly = ELM_DEFAULT_POLY;
+	s8 i;
+	u32 location_status;
+
+	elm_load_syndromes(syndrome, nibbles, poly);
+
+	/* start processing */
+	writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
+				| ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
+		&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
+
+	/* wait for processing to complete */
+	while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
+		;
+	/* clear status */
+	writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
+			&elm_cfg->irqstatus);
+
+	/* check if correctable */
+	location_status = readl(&elm_cfg->error_location[poly].location_status);
+	if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
+		return -1;
+
+	/* get error count */
+	*error_count = readl(&elm_cfg->error_location[poly].location_status) &
+					ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
+
+	for (i = 0; i < *error_count; i++) {
+		error_locations[i] =
+		     readl(&elm_cfg->error_location[poly].error_location_x[i]);
+	}
+
+	return 0;
+}
+
+
+/**
+ * elm_config - Configure ELM module
+ * @level: 4 / 8 / 16 bit BCH
+ *
+ * Configure ELM module based on BCH level.
+ * Set mode as continuous mode.
+ * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
+ * Also, the mode is set only for syndrome 0
+ */
+int elm_config(enum bch_level level)
+{
+	u32 val;
+	u8 poly = ELM_DEFAULT_POLY;
+	u32 buffer_size = 0x7FF;
+
+	/* config size and level */
+	val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
+	val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
+				ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
+	writel(val, &elm_cfg->location_config);
+
+	/* config continous mode */
+	/* enable interrupt generation for syndrome polynomial set */
+	writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
+			&elm_cfg->irqenable);
+	/* set continuous mode for the syndrome polynomial set */
+	writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
+			&elm_cfg->page_ctrl);
+
+	return 0;
+}
+
+/**
+ * elm_reset - Do a soft reset of ELM
+ *
+ * Perform a soft reset of ELM and return after reset is done.
+ */
+void elm_reset(void)
+{
+	/* initiate reset */
+	writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
+			&elm_cfg->sysconfig);
+
+	/* wait for reset complete and normal operation */
+	while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
+		ELM_SYSSTATUS_RESETDONE)
+		;
+}
+
+/**
+ * elm_init - Initialize ELM module
+ *
+ * Initialize ELM support. Currently it does only base address init
+ * and ELM reset.
+ */
+void elm_init(void)
+{
+	elm_cfg = (struct elm *)ELM_BASE;
+	elm_reset();
+}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index ec1787f224..5e7e6b3375 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -15,15 +15,13 @@
 #include <linux/bch.h>
 #include <linux/compiler.h>
 #include <nand.h>
-#ifdef CONFIG_AM33XX
-#include <asm/arch/elm.h>
-#endif
+#include <asm/omap_elm.h>
+
+#define BADBLOCK_MARKER_LENGTH	2
+#define SECTOR_BYTES		512
 
 static uint8_t cs;
-static __maybe_unused struct nand_ecclayout hw_nand_oob =
-	GPMC_NAND_HW_ECC_LAYOUT;
-static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob =
-	GPMC_NAND_HW_BCH8_ECC_LAYOUT;
+static __maybe_unused struct nand_ecclayout omap_ecclayout;
 
 /*
  * omap_nand_hwcontrol - Set the address pointers corretly for the
@@ -233,6 +231,7 @@ struct nand_bch_priv {
 	uint8_t type;
 	uint8_t nibbles;
 	struct bch_control *control;
+	enum omap_ecc ecc_scheme;
 };
 
 /* bch types */
@@ -274,17 +273,15 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 {
 	uint32_t val;
 	uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1;
-#ifdef CONFIG_AM33XX
 	uint32_t unused_length = 0;
-#endif
 	uint32_t wr_mode = BCH_WRAPMODE_6;
 	struct nand_bch_priv *bch = chip->priv;
 
 	/* Clear the ecc result registers, select ecc reg as 1 */
 	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
 
-#ifdef CONFIG_AM33XX
-	wr_mode = BCH_WRAPMODE_1;
+	if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
+		wr_mode = BCH_WRAPMODE_1;
 
 	switch (bch->nibbles) {
 	case ECC_BCH4_NIBBLES:
@@ -320,7 +317,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 		val |= (unused_length << 22);
 		break;
 	}
-#else
+	} else {
 	/*
 	 * This ecc_size_config setting is for BCH sw library.
 	 *
@@ -333,7 +330,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
 	 */
 	val = (32 << 22) | (0 << 12);
-#endif
+	}
 	/* ecc size configuration */
 	writel(val, &gpmc_cfg->ecc_size_config);
 
@@ -376,9 +373,9 @@ static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd)
 }
 
 /*
- * BCH8 support (needs ELM and thus AM33xx-only)
+ * BCH support using ELM module
  */
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_NAND_OMAP_ELM
 /*
  * omap_read_bch8_result - Read BCH result for BCH8 level
  *
@@ -631,20 +628,20 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 	return 0;
 }
-#endif /* CONFIG_AM33XX */
+#endif /* CONFIG_NAND_OMAP_ELM */
 
 /*
  * OMAP3 BCH8 support (with BCH library)
  */
-#ifdef CONFIG_NAND_OMAP_BCH8
+#ifdef CONFIG_BCH
 /*
- *  omap_calculate_ecc_bch - Read BCH ECC result
+ *  omap_calculate_ecc_bch_sw - Read BCH ECC result
  *
  *  @mtd:	MTD device structure
  *  @dat:	The pointer to data on which ecc is computed (unused here)
  *  @ecc:	The ECC output buffer
  */
-static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat,
 				uint8_t *ecc)
 {
 	int ret = 0;
@@ -689,13 +686,13 @@ static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
 }
 
 /**
- * omap_correct_data_bch - Decode received data and correct errors
+ * omap_correct_data_bch_sw - Decode received data and correct errors
  * @mtd: MTD device structure
  * @data: page data
  * @read_ecc: ecc read from nand flash
  * @calc_ecc: ecc read from HW ECC registers
  */
-static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data,
+static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
 				 u_char *read_ecc, u_char *calc_ecc)
 {
 	int i, count;
@@ -752,7 +749,150 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
 		chip_priv->control = NULL;
 	}
 }
-#endif /* CONFIG_NAND_OMAP_BCH8 */
+#endif /* CONFIG_BCH */
+
+/**
+ * omap_select_ecc_scheme - configures driver for particular ecc-scheme
+ * @nand: NAND chip device structure
+ * @ecc_scheme: ecc scheme to configure
+ * @pagesize: number of main-area bytes per page of NAND device
+ * @oobsize: number of OOB/spare bytes per page of NAND device
+ */
+static int omap_select_ecc_scheme(struct nand_chip *nand,
+	enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
+	struct nand_bch_priv	*bch		= nand->priv;
+	struct nand_ecclayout	*ecclayout	= nand->ecc.layout;
+	int eccsteps = pagesize / SECTOR_BYTES;
+	int i;
+
+	switch (ecc_scheme) {
+	case OMAP_ECC_HAM1_CODE_SW:
+		debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
+		/* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
+		 * initialized in nand_scan_tail(), so just set ecc.mode */
+		bch_priv.control	= NULL;
+		bch_priv.type		= 0;
+		nand->ecc.mode		= NAND_ECC_SOFT;
+		nand->ecc.layout	= NULL;
+		nand->ecc.size		= pagesize;
+		bch->ecc_scheme		= OMAP_ECC_HAM1_CODE_SW;
+		break;
+
+	case OMAP_ECC_HAM1_CODE_HW:
+		debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		bch_priv.control	= NULL;
+		bch_priv.type		= 0;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 1;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 3;
+		nand->ecc.hwctl		= omap_enable_hwecc;
+		nand->ecc.correct	= omap_correct_data;
+		nand->ecc.calculate	= omap_calculate_ecc;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		for (i = 0; i < ecclayout->eccbytes; i++)
+			ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		bch->ecc_scheme		= OMAP_ECC_HAM1_CODE_HW;
+		break;
+
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_BCH
+		debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(13 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		/* check if BCH S/W library can be used for error detection */
+		bch_priv.control = init_bch(13, 8, 0x201b);
+		if (!bch_priv.control) {
+			printf("nand: error: could not init_bch()\n");
+			return -ENODEV;
+		}
+		bch_priv.type = ECC_BCH8;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 8;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 13;
+		nand->ecc.hwctl		= omap_enable_ecc_bch;
+		nand->ecc.correct	= omap_correct_data_bch_sw;
+		nand->ecc.calculate	= omap_calculate_ecc_bch_sw;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		ecclayout->eccpos[0]	= BADBLOCK_MARKER_LENGTH;
+		for (i = 1; i < ecclayout->eccbytes; i++) {
+			if (i % nand->ecc.bytes)
+				ecclayout->eccpos[i] =
+						ecclayout->eccpos[i - 1] + 1;
+			else
+				ecclayout->eccpos[i] =
+						ecclayout->eccpos[i - 1] + 2;
+		}
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		omap_hwecc_init_bch(nand, NAND_ECC_READ);
+		bch->ecc_scheme		= OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+		break;
+#else
+		printf("nand: error: CONFIG_BCH required for ECC\n");
+		return -EINVAL;
+#endif
+
+	case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+		debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(14 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		/* intialize ELM for ECC error detection */
+		elm_init();
+		bch_priv.type		= ECC_BCH8;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 8;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 14;
+		nand->ecc.hwctl		= omap_enable_ecc_bch;
+		nand->ecc.correct	= omap_correct_data_bch;
+		nand->ecc.calculate	= omap_calculate_ecc_bch;
+		nand->ecc.read_page	= omap_read_page_bch;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		for (i = 0; i < ecclayout->eccbytes; i++)
+			ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		bch->ecc_scheme		= OMAP_ECC_BCH8_CODE_HW;
+		break;
+#else
+		printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+		return -EINVAL;
+#endif
+
+	default:
+		debug("nand: error: ecc scheme not enabled or supported\n");
+		return -EINVAL;
+	}
+	return 0;
+}
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -763,77 +903,45 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
  * @eccstrength		- the number of bits that could be corrected
  *			  (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
  */
-void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
+int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
 {
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
+	int err = 0;
 
 	if (nand_curr_device < 0 ||
 	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
 	    !nand_info[nand_curr_device].name) {
-		printf("Error: Can't switch ecc, no devices available\n");
-		return;
+		printf("nand: error: no NAND devices found\n");
+		return -ENODEV;
 	}
 
 	mtd = &nand_info[nand_curr_device];
 	nand = mtd->priv;
-
 	nand->options |= NAND_OWN_BUFFERS;
-
-	/* Reset ecc interface */
-	nand->ecc.mode = NAND_ECC_NONE;
-	nand->ecc.read_page = NULL;
-	nand->ecc.write_page = NULL;
-	nand->ecc.read_oob = NULL;
-	nand->ecc.write_oob = NULL;
-	nand->ecc.hwctl = NULL;
-	nand->ecc.correct = NULL;
-	nand->ecc.calculate = NULL;
-	nand->ecc.strength = eccstrength;
-
 	/* Setup the ecc configurations again */
 	if (hardware) {
 		if (eccstrength == 1) {
-			nand->ecc.mode = NAND_ECC_HW;
-			nand->ecc.layout = &hw_nand_oob;
-			nand->ecc.size = 512;
-			nand->ecc.bytes = 3;
-			nand->ecc.hwctl = omap_enable_hwecc;
-			nand->ecc.correct = omap_correct_data;
-			nand->ecc.calculate = omap_calculate_ecc;
-			omap_hwecc_init(nand);
-			printf("1-bit hamming HW ECC selected\n");
-		}
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-		else if (eccstrength == 8) {
-			nand->ecc.mode = NAND_ECC_HW;
-			nand->ecc.layout = &hw_bch8_nand_oob;
-			nand->ecc.size = 512;
-#ifdef CONFIG_AM33XX
-			nand->ecc.bytes = 14;
-			nand->ecc.read_page = omap_read_page_bch;
-#else
-			nand->ecc.bytes = 13;
-#endif
-			nand->ecc.hwctl = omap_enable_ecc_bch;
-			nand->ecc.correct = omap_correct_data_bch;
-			nand->ecc.calculate = omap_calculate_ecc_bch;
-			omap_hwecc_init_bch(nand, NAND_ECC_READ);
-			printf("8-bit BCH HW ECC selected\n");
+			err = omap_select_ecc_scheme(nand,
+					OMAP_ECC_HAM1_CODE_HW,
+					mtd->writesize, mtd->oobsize);
+		} else if (eccstrength == 8) {
+			err = omap_select_ecc_scheme(nand,
+					OMAP_ECC_BCH8_CODE_HW,
+					mtd->writesize, mtd->oobsize);
+		} else {
+			printf("nand: error: unsupported ECC scheme\n");
+			return -EINVAL;
 		}
-#endif
 	} else {
-		nand->ecc.mode = NAND_ECC_SOFT;
-		/* Use mtd default settings */
-		nand->ecc.layout = NULL;
-		nand->ecc.size = 0;
-		printf("SW ECC selected\n");
+		err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+					mtd->writesize, mtd->oobsize);
 	}
 
 	/* Update NAND handling after ECC mode switch */
-	nand_scan_tail(mtd);
-
-	nand->options &= ~NAND_OWN_BUFFERS;
+	if (!err)
+		err = nand_scan_tail(mtd);
+	return err;
 }
 #endif /* CONFIG_SPL_BUILD */
 
@@ -856,7 +964,7 @@ int board_nand_init(struct nand_chip *nand)
 {
 	int32_t gpmc_config = 0;
 	cs = 0;
-
+	int err = 0;
 	/*
 	 * xloader/Uboot's gpmc configuration would have configured GPMC for
 	 * nand type of memory. The following logic scans and latches on to the
@@ -873,7 +981,7 @@ int board_nand_init(struct nand_chip *nand)
 		cs++;
 	}
 	if (cs >= GPMC_MAX_CS) {
-		printf("NAND: Unable to find NAND settings in "
+		printf("nand: error: Unable to find NAND settings in "
 			"GPMC Configuration - quitting\n");
 		return -ENODEV;
 	}
@@ -885,64 +993,27 @@ int board_nand_init(struct nand_chip *nand)
 
 	nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
 	nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
-
-	nand->cmd_ctrl = omap_nand_hwcontrol;
-	nand->options = NAND_NO_PADDING | NAND_CACHEPRG;
+	nand->priv	= &bch_priv;
+	nand->cmd_ctrl	= omap_nand_hwcontrol;
+	nand->options	|= NAND_NO_PADDING | NAND_CACHEPRG;
 	/* If we are 16 bit dev, our gpmc config tells us that */
 	if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
 		nand->options |= NAND_BUSWIDTH_16;
 
 	nand->chip_delay = 100;
+	nand->ecc.layout = &omap_ecclayout;
 
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-#ifdef CONFIG_AM33XX
-	/* AM33xx uses the ELM */
-	/* required in case of BCH */
-	elm_init();
-#else
-	/*
-	 * Whereas other OMAP based SoC do not have the ELM, they use the BCH
-	 * SW library.
-	 */
-	bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */);
-	if (!bch_priv.control) {
-		puts("Could not init_bch()\n");
-		return -ENODEV;
-	}
-#endif
-	/* BCH info that will be correct for SPL or overridden otherwise. */
-	nand->priv = &bch_priv;
-#endif
-
-	/* Default ECC mode */
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.layout = &hw_bch8_nand_oob;
-	nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
-	nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
-	nand->ecc.strength = 8;
-	nand->ecc.hwctl = omap_enable_ecc_bch;
-	nand->ecc.correct = omap_correct_data_bch;
-	nand->ecc.calculate = omap_calculate_ecc_bch;
-#ifdef CONFIG_AM33XX
-	nand->ecc.read_page = omap_read_page_bch;
-#endif
-	omap_hwecc_init_bch(nand, NAND_ECC_READ);
-#else
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC)
-	nand->ecc.mode = NAND_ECC_SOFT;
+	/* select ECC scheme */
+#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
+	err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
+			CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE);
 #else
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.layout = &hw_nand_oob;
-	nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
-	nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
-	nand->ecc.hwctl = omap_enable_hwecc;
-	nand->ecc.correct = omap_correct_data;
-	nand->ecc.calculate = omap_calculate_ecc;
-	nand->ecc.strength = 1;
-	omap_hwecc_init(nand);
-#endif
+	/* pagesize and oobsize are not required to configure sw ecc-scheme */
+	err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+			0, 0);
 #endif
+	if (err)
+		return err;
 
 #ifdef CONFIG_SPL_BUILD
 	if (nand->options & NAND_BUSWIDTH_16)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 067f8ef184..979e4af7c5 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -761,7 +761,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
 	uint8_t *oob_buf = this->oob_buf;
 
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		if (readcol >= lastgap)
 			readcol += free->offset - lastgap;
 		if (readend >= lastgap)
@@ -770,7 +771,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
 	}
 	this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		int free_end = free->offset + free->length;
 		if (free->offset < readend && free_end > readcol) {
 			int st = max_t(int,free->offset,readcol);
@@ -1356,7 +1358,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 	unsigned int i;
 
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		if (writecol >= lastgap)
 			writecol += free->offset - lastgap;
 		if (writeend >= lastgap)
@@ -1364,7 +1367,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 		lastgap = free->offset + free->length;
 	}
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		int free_end = free->offset + free->length;
 		if (free->offset < writeend && free_end > writecol) {
 			int st = max_t(int,free->offset,writecol);
@@ -2750,7 +2754,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	 * the out of band area
 	 */
 	this->ecclayout->oobavail = 0;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE &&
 	    this->ecclayout->oobfree[i].length; i++)
 		this->ecclayout->oobavail +=
 			this->ecclayout->oobfree[i].length;