diff options
author | Kyle Moffett <Kyle.D.Moffett@boeing.com> | 2011-10-18 11:05:28 +0000 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-10-28 00:35:26 +0200 |
commit | 2326a94db10d9b6c0bf322c6536cafcac8e85522 (patch) | |
tree | cc64789e742b2cc61b7cff7e15060727dbee8781 /drivers/net/e1000.c | |
parent | 114d7fc053470d900b406711ba8cb69cf9131316 (diff) |
e1000: Export core EEPROM access functions for SPI support
A followup patch will be adding a configurable feature to enable
programming of E1000 EEPROMs from the command line or via the generic
U-Boot SPI interface.
In order for it to work it needs access to certain E1000-internal
functions, so export those in the e1000.h header file.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers/net/e1000.c')
-rw-r--r-- | drivers/net/e1000.c | 22 |
1 files changed, 5 insertions, 17 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 39057d2316..7a6ecab452 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -134,13 +134,6 @@ static void e1000_set_media_type(struct e1000_hw *hw); static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); -#define E1000_WRITE_REG(a, reg, value) (writel((value), ((a)->hw_addr + E1000_##reg))) -#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_##reg)) -#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) (\ - writel((value), ((a)->hw_addr + E1000_##reg + ((offset) << 2)))) -#define E1000_READ_REG_ARRAY(a, reg, offset) ( \ - readl((a)->hw_addr + E1000_##reg + ((offset) << 2))) -#define E1000_WRITE_FLUSH(a) {uint32_t x; x = E1000_READ_REG(a, STATUS);} #ifndef CONFIG_AP1000 /* remove for warnings */ static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, @@ -152,8 +145,7 @@ static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, * hw - Struct containing variables accessed by shared code * eecd - EECD's current value *****************************************************************************/ -static void -e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t * eecd) +void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t * eecd) { /* Raise the clock input to the EEPROM (by setting the SK bit), and then * wait 50 microseconds. @@ -170,8 +162,7 @@ e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t * eecd) * hw - Struct containing variables accessed by shared code * eecd - EECD's current value *****************************************************************************/ -static void -e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t * eecd) +void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t * eecd) { /* Lower the clock input to the EEPROM (by clearing the SK bit), and then * wait 50 microseconds. @@ -275,8 +266,7 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_standby_eeprom(struct e1000_hw *hw) +void e1000_standby_eeprom(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t eecd; @@ -354,8 +344,7 @@ static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This * function should be called before issuing a command to the EEPROM. *****************************************************************************/ -static int32_t -e1000_acquire_eeprom(struct e1000_hw *hw) +int32_t e1000_acquire_eeprom(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t eecd, i = 0; @@ -671,8 +660,7 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, return error; } -static void -e1000_release_eeprom(struct e1000_hw *hw) +void e1000_release_eeprom(struct e1000_hw *hw) { uint32_t eecd; |