Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file

1 files changed, 144 insertions, 0 deletions

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
new file mode 100644
index 0000000000..8c20da2682
--- /dev/null
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx GMII2RGMII phy driver
+ *
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#include <dm.h>
+#include <phy.h>
+#include <config.h>
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ZYNQ_GMII2RGMII_REG		0x10
+#define ZYNQ_GMII2RGMII_SPEED_MASK	(BMCR_SPEED1000 | BMCR_SPEED100)
+
+static int xilinxgmiitorgmii_config(struct phy_device *phydev)
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->config)
+		ext_phydev->drv->config(ext_phydev);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_extread(struct phy_device *phydev, int addr,
+				     int devaddr, int regnum)
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->readext)
+		ext_phydev->drv->readext(ext_phydev, addr, devaddr, regnum);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_extwrite(struct phy_device *phydev, int addr,
+				      int devaddr, int regnum, u16 val)
+
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->writeext)
+		ext_phydev->drv->writeext(ext_phydev, addr, devaddr, regnum,
+					  val);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_startup(struct phy_device *phydev)
+{
+	u16 val = 0;
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	ext_phydev->dev = phydev->dev;
+	if (ext_phydev->drv->startup)
+		ext_phydev->drv->startup(ext_phydev);
+
+	val = phy_read(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG);
+	val &= ~ZYNQ_GMII2RGMII_SPEED_MASK;
+
+	if (ext_phydev->speed == SPEED_1000)
+		val |= BMCR_SPEED1000;
+	else if (ext_phydev->speed == SPEED_100)
+		val |= BMCR_SPEED100;
+
+	phy_write(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG, val |
+		  BMCR_FULLDPLX);
+
+	phydev->duplex = ext_phydev->duplex;
+	phydev->speed = ext_phydev->speed;
+	phydev->link = ext_phydev->link;
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_probe(struct phy_device *phydev)
+{
+	int ofnode = phydev->addr;
+	u32 phy_of_handle;
+	int ext_phyaddr = -1;
+	struct phy_device *ext_phydev;
+
+	debug("%s\n", __func__);
+
+	if (phydev->interface != PHY_INTERFACE_MODE_GMII) {
+		printf("Incorrect interface type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Read the phy address again as the one we read in ethernet driver
+	 * was overwritten for the purpose of storing the ofnode
+	 */
+	phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1);
+	phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode,
+					      "phy-handle");
+	if (phy_of_handle > 0)
+		ext_phyaddr = fdtdec_get_int(gd->fdt_blob,
+					     phy_of_handle,
+					     "reg", -1);
+	ext_phydev = phy_find_by_mask(phydev->bus,
+				      1 << ext_phyaddr,
+				      PHY_INTERFACE_MODE_RGMII);
+	if (!ext_phydev) {
+		printf("%s, No external phy device found\n", __func__);
+		return -EINVAL;
+	}
+
+	ext_phydev->node = offset_to_ofnode(phy_of_handle);
+	phydev->priv = ext_phydev;
+
+	debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr,
+	      ext_phyaddr);
+
+	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+	return 0;
+}
+
+static struct phy_driver gmii2rgmii_driver = {
+	.name = "XILINX GMII2RGMII",
+	.uid = PHY_GMII2RGMII_ID,
+	.mask = 0xffffffff,
+	.features = PHY_GBIT_FEATURES,
+	.probe = xilinxgmiitorgmii_probe,
+	.config = xilinxgmiitorgmii_config,
+	.startup = xilinxgmiitorgmii_startup,
+	.writeext = xilinxgmiitorgmii_extwrite,
+	.readext = xilinxgmiitorgmii_extread,
+};
+
+int phy_xilinx_gmii2rgmii_init(void)
+{
+	phy_register(&gmii2rgmii_driver);
+
+	return 0;
+}