diff options
| author | Andrea Merello <andrea.merello@gmail.com> | 2016-05-26 18:24:28 +0200 |
|---|---|---|
| committer | Joe Hershberger <joe.hershberger@ni.com> | 2016-10-13 12:24:51 -0500 |
| commit | 2ec4d10b65d1f7d45098606e9a6857d587c3027c (patch) | |
| tree | 9af712a8a219aad152b3a78c3ee859e3555ac66c /drivers/net/phy | |
| parent | 5ebd27d860ec0c6e36f1b0f973653fe66a7360be (diff) | |
phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID
This adds support for internal delay on RX and TX on RGMII interface for the
AR8035 phy.
This is basically the same Linux driver do. Tested on a Zynq Zturn board (for
which u-boot support in is my tree; first patch waiting ML approval)
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/atheros.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index e57c4120a3..694a338053 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -31,6 +31,22 @@ static int ar8035_config(struct phy_device *phydev) regval = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, (regval|0x0100)); + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + /* select debug reg 5 */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1D, 0x5); + /* enable tx delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1E, 0x0100); + } + + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) { + /* select debug reg 0 */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1D, 0x0); + /* enable rx delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1E, 0x8000); + } + phydev->supported = phydev->drv->features; genphy_config_aneg(phydev); |