drivers: net: remove dead drivers

The following configs are not defined at all:

 - CONFIG_INCA_IP_SWITCH
 - CONFIG_PBL2800_ETHER
 - CONFIG_PHY_ICPLUS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

3 files changed, 0 insertions, 84 deletions

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index dbf7bf7058..9556536b77 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_PHY_ATHEROS) += atheros.o
 obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
 obj-$(CONFIG_PHY_DAVICOM) += davicom.o
 obj-$(CONFIG_PHY_ET1011C) += et1011c.o
-obj-$(CONFIG_PHY_ICPLUS) += icplus.o
 obj-$(CONFIG_PHY_LXT) += lxt.o
 obj-$(CONFIG_PHY_MARVELL) += marvell.o
 obj-$(CONFIG_PHY_MICREL) += micrel.o
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
deleted file mode 100644
index 597195580b..0000000000
--- a/drivers/net/phy/icplus.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * ICPlus PHY drivers
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
- */
-#include <phy.h>
-
-/* IP101A/G - IP1001 */
-#define IP10XX_SPEC_CTRL_STATUS         16      /* Spec. Control Register */
-#define IP1001_SPEC_CTRL_STATUS_2       20      /* IP1001 Spec. Control Reg 2 */
-#define IP1001_PHASE_SEL_MASK           3       /* IP1001 RX/TXPHASE_SEL */
-#define IP1001_APS_ON                   11      /* IP1001 APS Mode  bit */
-#define IP101A_G_APS_ON                 2       /* IP101A/G APS Mode bit */
-#define IP101A_G_IRQ_CONF_STATUS        0x11    /* Conf Info IRQ & Status Reg */
-#define IP101A_G_IRQ_PIN_USED           (1<<15) /* INTR pin used */
-#define IP101A_G_IRQ_DEFAULT            IP101A_G_IRQ_PIN_USED
-
-static int ip1001_config(struct phy_device *phydev)
-{
-	int c;
-
-	/* Enable Auto Power Saving mode */
-	c = phy_read(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2);
-	if (c < 0)
-		return c;
-	c |= IP1001_APS_ON;
-	c = phy_write(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2, c);
-	if (c < 0)
-		return c;
-
-	/* INTR pin used: speed/link/duplex will cause an interrupt */
-	c = phy_write(phydev, MDIO_DEVAD_NONE, IP101A_G_IRQ_CONF_STATUS,
-		      IP101A_G_IRQ_DEFAULT);
-	if (c < 0)
-		return c;
-
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
-		/*
-		 * Additional delay (2ns) used to adjust RX clock phase
-		 * at RGMII interface
-		 */
-		c = phy_read(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS);
-		if (c < 0)
-			return c;
-
-		c |= IP1001_PHASE_SEL_MASK;
-		c = phy_write(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS,
-			      c);
-		if (c < 0)
-			return c;
-	}
-
-	return 0;
-}
-
-static int ip1001_startup(struct phy_device *phydev)
-{
-	genphy_update_link(phydev);
-	genphy_parse_link(phydev);
-
-	return 0;
-}
-static struct phy_driver IP1001_driver = {
-	.name = "ICPlus IP1001",
-	.uid = 0x02430d90,
-	.mask = 0x0ffffff0,
-	.features = PHY_GBIT_FEATURES,
-	.config = &ip1001_config,
-	.startup = &ip1001_startup,
-	.shutdown = &genphy_shutdown,
-};
-
-int phy_icplus_init(void)
-{
-	phy_register(&IP1001_driver);
-
-	return 0;
-}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index aac85c4d09..1d6c14f2ad 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -454,9 +454,6 @@ int phy_init(void)
 #ifdef CONFIG_PHY_ET1011C
 	phy_et1011c_init();
 #endif
-#ifdef CONFIG_PHY_ICPLUS
-	phy_icplus_init();
-#endif
 #ifdef CONFIG_PHY_LXT
 	phy_lxt_init();
 #endif