diff options
| author | Michal Simek <monstr@monstr.eu> | 2016-02-13 10:31:32 +0100 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2016-02-22 16:37:50 +0100 |
| commit | 6a10bc5be8b809d43af7ddb66c45eeff7e622da1 (patch) | |
| tree | a1618a39eabbe3a054ff91c3e0a49454e5a2ce90 /drivers/net/phy | |
| parent | 9ec2cf00b456d64c9ef25ca2d1c4a95d4b855cee (diff) | |
net: phy: realtek: Use generic genphy_parse_link() for RTL8211E
The problem with current implementation is that SPDDONE bit is 1
but link bit is zero. That's why phydev->link is setup to 0
which ending up in driver failure that link is not up.
Log:
Zynq> dhcp
ethernet@e000b000 Waiting for PHY auto negotiation to complete.......
done
ethernet@e000b000: No link.
There is at least 1ms delay between spddone bit and link up.
Use genphy_read_status() instead of realtek implemenation which is
working with page 11. Linux driver is also using generic implementation.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/realtek.c | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index bba48da409..259a87fcc5 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -203,6 +203,14 @@ static int rtl8211x_startup(struct phy_device *phydev) return 0; } +static int rtl8211e_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + genphy_parse_link(phydev); + + return 0; +} + static int rtl8211f_startup(struct phy_device *phydev) { /* Read the Status (2x to make sure link is right) */ @@ -230,7 +238,7 @@ static struct phy_driver RTL8211E_driver = { .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, - .startup = &rtl8211x_startup, + .startup = &rtl8211e_startup, .shutdown = &genphy_shutdown, }; |