diff options
author | Wolfgang Denk <wd@denx.de> | 2012-07-12 08:23:58 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-12 08:23:58 +0200 |
commit | 0878222fed3fafbfd0b1f2e5a6b2da90a81e910d (patch) | |
tree | f88ba4ad1c5f06e6a772d5062c526d8153a71678 /drivers/net | |
parent | 0b15d51ed07db4c318d9c6b02b394ba5a3bc4296 (diff) | |
parent | 154177e14a141468374f438ed3096ab097b79976 (diff) |
Merge branch 'next' of git://git.denx.de/u-boot-net into next
* 'next' of git://git.denx.de/u-boot-net:
net: Inline the new eth_setenv_enetaddr_by_index function
net: allow setting env enetaddr from net device setting
net/designware: Consecutive writes to the same register to be avoided
CACHE: net: asix: Fix asix driver to work with data cache on
net: phy: micrel: make ksz9021 phy accessible
net: abort network initialization if the PHY driver fails
phylib: phy_startup() should return an error code on failure
net: tftp: fix type of block arg to store_block
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/designware.c | 4 | ||||
-rw-r--r-- | drivers/net/fec_mxc.c | 8 | ||||
-rw-r--r-- | drivers/net/fm/eth.c | 9 | ||||
-rw-r--r-- | drivers/net/phy/micrel.c | 15 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 5 | ||||
-rw-r--r-- | drivers/net/sh_eth.c | 6 | ||||
-rw-r--r-- | drivers/net/tsec.c | 8 | ||||
-rw-r--r-- | drivers/net/xilinx_axi_emac.c | 6 | ||||
-rw-r--r-- | drivers/net/xilinx_ll_temac.c | 8 |
9 files changed, 58 insertions, 11 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 326d550c1f..bf21a08bdf 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -171,8 +171,8 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); - writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode); - writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode); + writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD | + TXSECONDFRAME, &dma_p->opmode); conf = FRAMEBURSTENABLE | DISABLERXOWN; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index eee41d7c8b..5700552189 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -510,7 +510,13 @@ static int fec_open(struct eth_device *edev) fec_eth_phy_config(edev); if (fec->phydev) { /* Start up the PHY */ - phy_startup(fec->phydev); + int ret = phy_startup(fec->phydev); + + if (ret) { + printf("Could not initialize PHY %s\n", + fec->phydev->dev->name); + return ret; + } speed = fec->phydev->speed; } else { speed = _100BASET; diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index f34f4db6b6..2b616adb6e 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -363,6 +363,9 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd) { struct fm_eth *fm_eth; struct fsl_enet_mac *mac; +#ifdef CONFIG_PHYLIB + int ret; +#endif fm_eth = (struct fm_eth *)dev->priv; mac = fm_eth->mac; @@ -384,7 +387,11 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd) fmc_tx_port_graceful_stop_disable(fm_eth); #ifdef CONFIG_PHYLIB - phy_startup(fm_eth->phydev); + ret = phy_startup(fm_eth->phydev); + if (ret) { + printf("%s: Could not initialize\n", fm_eth->phydev->dev->name); + return ret; + } #else fm_eth->phydev->speed = SPEED_1000; fm_eth->phydev->link = 1; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e3043dfa20..30f3264897 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -35,6 +35,12 @@ static struct phy_driver KSZ804_driver = { .shutdown = &genphy_shutdown, }; +#ifndef CONFIG_PHY_MICREL_KSZ9021 +/* + * I can't believe Micrel used the exact same part number + * for the KSZ9021 + * Shame Micrel, Shame!!!!! + */ static struct phy_driver KS8721_driver = { .name = "Micrel KS8721BL", .uid = 0x221610, @@ -44,7 +50,9 @@ static struct phy_driver KS8721_driver = { .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; +#endif +#ifdef CONFIG_PHY_MICREL_KSZ9021 /* ksz9021 PHY Registers */ #define MII_KSZ9021_EXTENDED_CTRL 0x0b #define MII_KSZ9021_EXTENDED_DATAW 0x0c @@ -127,12 +135,15 @@ static struct phy_driver ksz9021_driver = { .startup = &ksz9021_startup, .shutdown = &genphy_shutdown, }; +#endif int phy_micrel_init(void) { phy_register(&KSZ804_driver); - phy_register(&KS8721_driver); +#ifdef CONFIG_PHY_MICREL_KSZ9021 phy_register(&ksz9021_driver); - +#else + phy_register(&KS8721_driver); +#endif return 0; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 7d327f766a..baef60f827 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -723,10 +723,13 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr, return phydev; } +/* + * Start the PHY. Returns 0 on success, or a negative error code. + */ int phy_startup(struct phy_device *phydev) { if (phydev->drv->startup) - phydev->drv->startup(phydev); + return phydev->drv->startup(phydev); return 0; } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index bb57e4d53a..268d88428c 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -415,7 +415,11 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) goto err_phy_cfg; } phy = port_info->phydev; - phy_startup(phy); + ret = phy_startup(phy); + if (ret) { + printf(SHETHER_NAME ": phy startup failure\n"); + return ret; + } val = 0; diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3c1c8f0799..f5e314b9ee 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -480,6 +480,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; tsec_t *regs = priv->regs; + int ret; /* Make sure the controller is stopped */ tsec_halt(dev); @@ -511,7 +512,12 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) startup_tsec(dev); /* Start up the PHY */ - phy_startup(priv->phydev); + ret = phy_startup(priv->phydev); + if (ret) { + printf("Could not initialize PHY %s\n", + priv->phydev->dev->name); + return ret; + } adjust_link(priv, priv->phydev); diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 7854a04cae..d77714440a 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -272,7 +272,11 @@ static int setup_phy(struct eth_device *dev) phydev->advertising = phydev->supported; priv->phydev = phydev; phy_config(phydev); - phy_startup(phydev); + if (phy_startup(phydev)) { + printf("axiemac: could not initialize PHY %s\n", + phydev->dev->name); + return 0; + } switch (phydev->speed) { case 1000: diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c index 27dafc15c0..b67153bec8 100644 --- a/drivers/net/xilinx_ll_temac.c +++ b/drivers/net/xilinx_ll_temac.c @@ -232,6 +232,7 @@ static void ll_temac_halt(struct eth_device *dev) static int ll_temac_init(struct eth_device *dev, bd_t *bis) { struct ll_temac *ll_temac = dev->priv; + int ret; printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n", dev->name, dev->index, dev->iobase); @@ -240,7 +241,12 @@ static int ll_temac_init(struct eth_device *dev, bd_t *bis) return -1; /* Start up the PHY */ - phy_startup(ll_temac->phydev); + ret = phy_startup(ll_temac->phydev); + if (ret) { + printf("%s: Could not initialize PHY %s\n", + dev->name, ll_temac->phydev->dev->name); + return ret; + } if (!ll_temac_adjust_link(dev)) { ll_temac_halt(dev); |