net: mvpp2: use new MVMDIO driver

This commit ports mvpp2 to use the recently introduced Marvell MDIO
(MVMDIO) driver.  It removes direct interaction with the SMI & XSMI
busses.  This commit is based in part on earlier work by
Ken Ma <make@marvell.com> in Marvell's own downstream repo:
https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/c81dc39.

The above refrenced work was based on an MVMDIO implementation that
never made it into U-Boot.  With this patch the mvpp2 driver switches
to use the new MVMDIO driver that is based on a more universal
mdio-uclass implementation.

Signed-off-by: Nevo Hed <nhed+github@starry.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 18 insertions, 177 deletions

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 64b03bff92..c5d1f9cf9f 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -33,6 +33,7 @@
 #include <linux/mbus.h>
 #include <asm-generic/gpio.h>
 #include <fdt_support.h>
+#include <linux/mdio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,8 +64,6 @@ do {									\
 #define MTU			1500
 #define RX_BUFFER_SIZE		(ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
 
-#define MVPP2_SMI_TIMEOUT			10000
-
 /* RX Fifo Registers */
 #define MVPP2_RX_DATA_FIFO_SIZE_REG(port)	(0x00 + 4 * (port))
 #define MVPP2_RX_ATTR_FIFO_SIZE_REG(port)	(0x20 + 4 * (port))
@@ -491,23 +490,8 @@ do {									\
 #define MVPP2_QUEUE_NEXT_DESC(q, index) \
 	(((index) < (q)->last_desc) ? ((index) + 1) : 0)
 
-/* SMI: 0xc0054 -> offset 0x54 to lms_base */
-#define MVPP21_SMI				0x0054
 /* PP2.2: SMI: 0x12a200 -> offset 0x1200 to iface_base */
 #define MVPP22_SMI				0x1200
-#define     MVPP2_PHY_REG_MASK			0x1f
-/* SMI register fields */
-#define     MVPP2_SMI_DATA_OFFS			0	/* Data */
-#define     MVPP2_SMI_DATA_MASK			(0xffff << MVPP2_SMI_DATA_OFFS)
-#define     MVPP2_SMI_DEV_ADDR_OFFS		16	/* PHY device address */
-#define     MVPP2_SMI_REG_ADDR_OFFS		21	/* PHY device reg addr*/
-#define     MVPP2_SMI_OPCODE_OFFS		26	/* Write/Read opcode */
-#define     MVPP2_SMI_OPCODE_READ		(1 << MVPP2_SMI_OPCODE_OFFS)
-#define     MVPP2_SMI_READ_VALID		(1 << 27)	/* Read Valid */
-#define     MVPP2_SMI_BUSY			(1 << 28)	/* Busy */
-
-#define     MVPP2_PHY_ADDR_MASK			0x1f
-#define     MVPP2_PHY_REG_MASK			0x1f
 
 /* Additional PPv2.2 offsets */
 #define MVPP22_MPCS				0x007000
@@ -953,7 +937,6 @@ struct mvpp2_port {
 
 	/* Per-port registers' base address */
 	void __iomem *base;
-	void __iomem *mdio_base;
 
 	struct mvpp2_rx_queue **rxqs;
 	struct mvpp2_tx_queue **txqs;
@@ -974,9 +957,8 @@ struct mvpp2_port {
 
 	struct phy_device *phy_dev;
 	phy_interface_t phy_interface;
-	int phy_node;
 	int phyaddr;
-	struct mii_dev *bus;
+	struct udevice *mdio_dev;
 #ifdef CONFIG_DM_GPIO
 	struct gpio_desc phy_reset_gpio;
 	struct gpio_desc phy_tx_disable_gpio;
@@ -4500,8 +4482,8 @@ static void mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
 	struct phy_device *phy_dev;
 
 	if (!port->init || port->link == 0) {
-		phy_dev = phy_connect(port->bus, port->phyaddr, dev,
-				      port->phy_interface);
+		phy_dev = dm_mdio_phy_connect(port->mdio_dev, port->phyaddr,
+					      dev, port->phy_interface);
 
 		/*
 		 * If the phy doesn't match with any existing u-boot drivers the
@@ -4586,7 +4568,7 @@ static int mvpp2_open(struct udevice *dev, struct mvpp2_port *port)
 		return err;
 	}
 
-	if (port->phy_node) {
+	if (port->phyaddr < PHY_MAX_ADDR) {
 		mvpp2_phy_connect(dev, port);
 		mvpp2_link_event(port);
 	} else {
@@ -4725,35 +4707,25 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
 	u32 id;
 	u32 phyaddr = 0;
 	int phy_mode = -1;
-
-	/* Default mdio_base from the same eth base */
-	if (port->priv->hw_version == MVPP21)
-		port->mdio_base = port->priv->lms_base + MVPP21_SMI;
-	else
-		port->mdio_base = port->priv->iface_base + MVPP22_SMI;
+	int ret;
 
 	phy_node = fdtdec_lookup_phandle(gd->fdt_blob, port_node, "phy");
 
 	if (phy_node > 0) {
-		ofnode phy_ofnode;
-		fdt_addr_t phy_base;
-
+		int parent;
 		phyaddr = fdtdec_get_int(gd->fdt_blob, phy_node, "reg", 0);
 		if (phyaddr < 0) {
 			dev_err(&pdev->dev, "could not find phy address\n");
 			return -1;
 		}
-
-		phy_ofnode = ofnode_get_parent(offset_to_ofnode(phy_node));
-		phy_base = ofnode_get_addr(phy_ofnode);
-		port->mdio_base = (void *)phy_base;
-
-		if (port->mdio_base < 0) {
-			dev_err(&pdev->dev, "could not find mdio base address\n");
-			return -1;
-		}
+		parent = fdt_parent_offset(gd->fdt_blob, phy_node);
+		ret = uclass_get_device_by_of_offset(UCLASS_MDIO, parent,
+						     &port->mdio_dev);
+		if (ret)
+			return ret;
 	} else {
-		phy_node = 0;
+		/* phy_addr is set to invalid value */
+		phyaddr = PHY_MAX_ADDR;
 	}
 
 	phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, "phy-mode", NULL);
@@ -4791,7 +4763,6 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
 		port->first_rxq = port->id * rxq_number;
 	else
 		port->first_rxq = port->id * port->priv->max_port_rxqs;
-	port->phy_node = phy_node;
 	port->phy_interface = phy_mode;
 	port->phyaddr = phyaddr;
 
@@ -5068,118 +5039,6 @@ static int mvpp2_init(struct udevice *dev, struct mvpp2 *priv)
 	return 0;
 }
 
-/* SMI / MDIO functions */
-
-static int smi_wait_ready(struct mvpp2_port *priv)
-{
-	u32 timeout = MVPP2_SMI_TIMEOUT;
-	u32 smi_reg;
-
-	/* wait till the SMI is not busy */
-	do {
-		/* read smi register */
-		smi_reg = readl(priv->mdio_base);
-		if (timeout-- == 0) {
-			printf("Error: SMI busy timeout\n");
-			return -EFAULT;
-		}
-	} while (smi_reg & MVPP2_SMI_BUSY);
-
-	return 0;
-}
-
-/*
- * mpp2_mdio_read - miiphy_read callback function.
- *
- * Returns 16bit phy register value, or 0xffff on error
- */
-static int mpp2_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
-{
-	struct mvpp2_port *priv = bus->priv;
-	u32 smi_reg;
-	u32 timeout;
-
-	/* check parameters */
-	if (addr > MVPP2_PHY_ADDR_MASK) {
-		printf("Error: Invalid PHY address %d\n", addr);
-		return -EFAULT;
-	}
-
-	if (reg > MVPP2_PHY_REG_MASK) {
-		printf("Err: Invalid register offset %d\n", reg);
-		return -EFAULT;
-	}
-
-	/* wait till the SMI is not busy */
-	if (smi_wait_ready(priv) < 0)
-		return -EFAULT;
-
-	/* fill the phy address and regiser offset and read opcode */
-	smi_reg = (addr << MVPP2_SMI_DEV_ADDR_OFFS)
-		| (reg << MVPP2_SMI_REG_ADDR_OFFS)
-		| MVPP2_SMI_OPCODE_READ;
-
-	/* write the smi register */
-	writel(smi_reg, priv->mdio_base);
-
-	/* wait till read value is ready */
-	timeout = MVPP2_SMI_TIMEOUT;
-
-	do {
-		/* read smi register */
-		smi_reg = readl(priv->mdio_base);
-		if (timeout-- == 0) {
-			printf("Err: SMI read ready timeout\n");
-			return -EFAULT;
-		}
-	} while (!(smi_reg & MVPP2_SMI_READ_VALID));
-
-	/* Wait for the data to update in the SMI register */
-	for (timeout = 0; timeout < MVPP2_SMI_TIMEOUT; timeout++)
-		;
-
-	return readl(priv->mdio_base) & MVPP2_SMI_DATA_MASK;
-}
-
-/*
- * mpp2_mdio_write - miiphy_write callback function.
- *
- * Returns 0 if write succeed, -EINVAL on bad parameters
- * -ETIME on timeout
- */
-static int mpp2_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
-			   u16 value)
-{
-	struct mvpp2_port *priv = bus->priv;
-	u32 smi_reg;
-
-	/* check parameters */
-	if (addr > MVPP2_PHY_ADDR_MASK) {
-		printf("Error: Invalid PHY address %d\n", addr);
-		return -EFAULT;
-	}
-
-	if (reg > MVPP2_PHY_REG_MASK) {
-		printf("Err: Invalid register offset %d\n", reg);
-		return -EFAULT;
-	}
-
-	/* wait till the SMI is not busy */
-	if (smi_wait_ready(priv) < 0)
-		return -EFAULT;
-
-	/* fill the phy addr and reg offset and write opcode and data */
-	smi_reg = value << MVPP2_SMI_DATA_OFFS;
-	smi_reg |= (addr << MVPP2_SMI_DEV_ADDR_OFFS)
-		| (reg << MVPP2_SMI_REG_ADDR_OFFS);
-	smi_reg &= ~MVPP2_SMI_OPCODE_READ;
-
-	/* write the smi register */
-	writel(smi_reg, priv->mdio_base);
-
-	return 0;
-}
-
 static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
 {
 	struct mvpp2_port *port = dev_get_priv(dev);
@@ -5192,7 +5051,7 @@ static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
 	struct mvpp2_rx_queue *rxq;
 	u8 *data;
 
-	if (port->phy_node)
+	if (port->phyaddr < PHY_MAX_ADDR)
 		if (!port->phy_dev->link)
 			return 0;
 
@@ -5261,7 +5120,7 @@ static int mvpp2_send(struct udevice *dev, void *packet, int length)
 	int tx_done;
 	int timeout;
 
-	if (port->phy_node)
+	if (port->phyaddr < PHY_MAX_ADDR)
 		if (!port->phy_dev->link)
 			return 0;
 
@@ -5445,31 +5304,13 @@ static int mvpp2_probe(struct udevice *dev)
 {
 	struct mvpp2_port *port = dev_get_priv(dev);
 	struct mvpp2 *priv = dev_get_priv(dev->parent);
-	struct mii_dev *bus;
 	int err;
 
 	/* Only call the probe function for the parent once */
 	if (!priv->probe_done)
 		err = mvpp2_base_probe(dev->parent);
 
-	port->priv = dev_get_priv(dev->parent);
-
-	/* Create and register the MDIO bus driver */
-	bus = mdio_alloc();
-	if (!bus) {
-		printf("Failed to allocate MDIO bus\n");
-		return -ENOMEM;
-	}
-
-	bus->read = mpp2_mdio_read;
-	bus->write = mpp2_mdio_write;
-	snprintf(bus->name, sizeof(bus->name), dev->name);
-	bus->priv = (void *)port;
-	port->bus = bus;
-
-	err = mdio_register(bus);
-	if (err)
-		return err;
+	port->priv = priv;
 
 	err = phy_info_parse(dev, port);
 	if (err)
@@ -5498,7 +5339,7 @@ static int mvpp2_probe(struct udevice *dev)
 			port->gop_id * MVPP22_PORT_OFFSET;
 
 		/* Set phy address of the port */
-		if(port->phy_node)
+		if (port->phyaddr < PHY_MAX_ADDR)
 			mvpp22_smi_phy_addr_cfg(port);
 
 		/* GoP Init */