pinctrl: rockchip: Add common rockchip pinctrl driver

Use this driver to fit all Rockchip SOCs and to support
the desired pinctrl configuration via DTS.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

1 files changed, 193 insertions, 0 deletions

diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3399.c b/drivers/pinctrl/rockchip/pinctrl-rk3399.c
new file mode 100644
index 0000000000..c5aab647a5
--- /dev/null
+++ b/drivers/pinctrl/rockchip/pinctrl-rk3399.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#include "pinctrl-rockchip.h"
+
+static struct rockchip_mux_route_data rk3399_mux_route_data[] = {
+	{
+		/* uart2dbga_rx */
+		.bank_num = 4,
+		.pin = 8,
+		.func = 2,
+		.route_offset = 0xe21c,
+		.route_val = BIT(16 + 10) | BIT(16 + 11),
+	}, {
+		/* uart2dbgb_rx */
+		.bank_num = 4,
+		.pin = 16,
+		.func = 2,
+		.route_offset = 0xe21c,
+		.route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10),
+	}, {
+		/* uart2dbgc_rx */
+		.bank_num = 4,
+		.pin = 19,
+		.func = 1,
+		.route_offset = 0xe21c,
+		.route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11),
+	}, {
+		/* pcie_clkreqn */
+		.bank_num = 2,
+		.pin = 26,
+		.func = 2,
+		.route_offset = 0xe21c,
+		.route_val = BIT(16 + 14),
+	}, {
+		/* pcie_clkreqnb */
+		.bank_num = 4,
+		.pin = 24,
+		.func = 1,
+		.route_offset = 0xe21c,
+		.route_val = BIT(16 + 14) | BIT(14),
+	},
+};
+
+#define RK3399_PULL_GRF_OFFSET		0xe040
+#define RK3399_PULL_PMU_OFFSET		0x40
+
+static void rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+					 int pin_num, struct regmap **regmap,
+					 int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+
+	/* The bank0:16 and bank1:32 pins are located in PMU */
+	if (bank->bank_num == 0 || bank->bank_num == 1) {
+		*regmap = priv->regmap_pmu;
+		*reg = RK3399_PULL_PMU_OFFSET;
+
+		*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
+
+		*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
+		*bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG;
+		*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
+	} else {
+		*regmap = priv->regmap_base;
+		*reg = RK3399_PULL_GRF_OFFSET;
+
+		/* correct the offset, as we're starting with the 3rd bank */
+		*reg -= 0x20;
+		*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
+		*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
+
+		*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
+		*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
+	}
+}
+
+static void rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+					int pin_num, struct regmap **regmap,
+					int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+	int drv_num = (pin_num / 8);
+
+	/*  The bank0:16 and bank1:32 pins are located in PMU */
+	if (bank->bank_num == 0 || bank->bank_num == 1)
+		*regmap = priv->regmap_pmu;
+	else
+		*regmap = priv->regmap_base;
+
+	*reg = bank->drv[drv_num].offset;
+	if (bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO ||
+	    bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY)
+		*bit = (pin_num % 8) * 3;
+	else
+		*bit = (pin_num % 8) * 2;
+}
+
+static struct rockchip_pin_bank rk3399_pin_banks[] = {
+	PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0",
+							 IOMUX_SOURCE_PMU,
+							 IOMUX_SOURCE_PMU,
+							 IOMUX_SOURCE_PMU,
+							 IOMUX_SOURCE_PMU,
+							 DRV_TYPE_IO_1V8_ONLY,
+							 DRV_TYPE_IO_1V8_ONLY,
+							 DRV_TYPE_IO_DEFAULT,
+							 DRV_TYPE_IO_DEFAULT,
+							 0x80,
+							 0x88,
+							 -1,
+							 -1,
+							 PULL_TYPE_IO_1V8_ONLY,
+							 PULL_TYPE_IO_1V8_ONLY,
+							 PULL_TYPE_IO_DEFAULT,
+							 PULL_TYPE_IO_DEFAULT
+							),
+	PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU,
+					IOMUX_SOURCE_PMU,
+					IOMUX_SOURCE_PMU,
+					IOMUX_SOURCE_PMU,
+					DRV_TYPE_IO_1V8_OR_3V0,
+					DRV_TYPE_IO_1V8_OR_3V0,
+					DRV_TYPE_IO_1V8_OR_3V0,
+					DRV_TYPE_IO_1V8_OR_3V0,
+					0xa0,
+					0xa8,
+					0xb0,
+					0xb8
+					),
+	PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0,
+				      DRV_TYPE_IO_1V8_OR_3V0,
+				      DRV_TYPE_IO_1V8_ONLY,
+				      DRV_TYPE_IO_1V8_ONLY,
+				      PULL_TYPE_IO_DEFAULT,
+				      PULL_TYPE_IO_DEFAULT,
+				      PULL_TYPE_IO_1V8_ONLY,
+				      PULL_TYPE_IO_1V8_ONLY
+				      ),
+	PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY,
+			   DRV_TYPE_IO_3V3_ONLY,
+			   DRV_TYPE_IO_3V3_ONLY,
+			   DRV_TYPE_IO_1V8_OR_3V0
+			   ),
+	PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0,
+			   DRV_TYPE_IO_1V8_3V0_AUTO,
+			   DRV_TYPE_IO_1V8_OR_3V0,
+			   DRV_TYPE_IO_1V8_OR_3V0
+			   ),
+};
+
+static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
+		.pin_banks		= rk3399_pin_banks,
+		.nr_banks		= ARRAY_SIZE(rk3399_pin_banks),
+		.label			= "RK3399-GPIO",
+		.type			= RK3399,
+		.grf_mux_offset		= 0xe000,
+		.pmu_mux_offset		= 0x0,
+		.grf_drv_offset		= 0xe100,
+		.pmu_drv_offset		= 0x80,
+		.iomux_routes		= rk3399_mux_route_data,
+		.niomux_routes		= ARRAY_SIZE(rk3399_mux_route_data),
+		.pull_calc_reg		= rk3399_calc_pull_reg_and_bit,
+		.drv_calc_reg		= rk3399_calc_drv_reg_and_bit,
+};
+
+static const struct udevice_id rk3399_pinctrl_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-pinctrl",
+		.data = (ulong)&rk3399_pin_ctrl
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_rk3399) = {
+	.name		= "rockchip_rk3399_pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= rk3399_pinctrl_ids,
+	.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
+	.ops		= &rockchip_pinctrl_ops,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind		= dm_scan_fdt_dev,
+#endif
+	.probe		= rockchip_pinctrl_probe,
+};