Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 75 insertions, 0 deletions

diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
new file mode 100644
index 0000000000..a663831589
--- /dev/null
+++ b/drivers/power/power_fsl.c
@@ -0,0 +1,75 @@
+/*
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <power/pmic.h>
+#include <fsl_pmic.h>
+#include <errno.h>
+
+#if defined(CONFIG_PMIC_FSL_MC13892)
+#define FSL_PMIC_I2C_LENGTH	3
+#elif defined(CONFIG_PMIC_FSL_MC34704)
+#define FSL_PMIC_I2C_LENGTH	1
+#endif
+
+#if defined(CONFIG_POWER_SPI)
+static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
+{
+	return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF);
+}
+#endif
+
+int pmic_init(unsigned char bus)
+{
+	static const char name[] = "FSL_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	p->name = name;
+	p->number_of_regs = PMIC_NUM_OF_REGS;
+
+#if defined(CONFIG_POWER_SPI)
+	p->interface = PMIC_SPI;
+	p->bus = CONFIG_FSL_PMIC_BUS;
+	p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
+	p->hw.spi.clk = CONFIG_FSL_PMIC_CLK;
+	p->hw.spi.mode = CONFIG_FSL_PMIC_MODE;
+	p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN;
+	p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END;
+	p->hw.spi.prepare_tx = pmic_spi_prepare_tx;
+#elif defined(CONFIG_POWER_I2C)
+	p->interface = PMIC_I2C;
+	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
+	p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
+	p->bus = bus;
+#else
+#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
+#endif
+
+	return 0;
+}