Merge with git://www.denx.de/git/u-boot.git

6 files changed, 35 insertions, 30 deletions

diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 5f209629f4..7559e92227 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -30,6 +30,8 @@
 qe_map_t		*qe_immr = NULL;
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 {
 	u32           cecr;
@@ -51,8 +53,6 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 
 uint qe_muram_alloc(uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -98,7 +98,7 @@ static void qe_sdma_init(void)
 	out_be32(&p->sdaqmr, 0);
 
 	/* Allocate 2KB temporary buffer for sdma */
-	sdma_buffer_base = qe_muram_alloc(2048, 64);
+	sdma_buffer_base = qe_muram_alloc(2048, 4096);
 	out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
 
 	/* Clear sdma status */
@@ -158,8 +158,6 @@ void qe_put_snum(u8 snum)
 
 void qe_init(uint qe_base)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Init the QE IMMR base */
 	qe_immr = (qe_map_t *)qe_base;
 
@@ -204,7 +202,6 @@ void qe_assign_page(uint snum, uint para_ram_base)
 
 int qe_set_brg(uint brg, uint rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile uint	*bp;
 	u32		divisor;
 	int		div16 = 0;
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index 0bcd0a9573..400b1a6f60 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -29,7 +29,7 @@
 #define QE_NUM_OF_BRGS	16
 #define UCC_MAX_NUM	8
 
-#define QE_DATAONLY_BASE	(uint)(128)
+#define QE_DATAONLY_BASE	0
 #define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)
 
 /* QE threads SNUM
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index c416a67c83..dc2765bb09 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -391,17 +391,17 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 	return 0;
 }
 
-static int init_mii_management_configuration(uec_t *uec_regs)
+static int init_mii_management_configuration(uec_mii_t *uec_mii_regs)
 {
 	uint		timeout = 0x1000;
 	u32		miimcfg = 0;
 
-	miimcfg = in_be32(&uec_regs->miimcfg);
+	miimcfg = in_be32(&uec_mii_regs->miimcfg);
 	miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
-	out_be32(&uec_regs->miimcfg, miimcfg);
+	out_be32(&uec_mii_regs->miimcfg, miimcfg);
 
 	/* Wait until the bus is free */
-	while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
+	while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
 	if (timeout <= 0) {
 		printf("%s: The MII Bus is stuck!", __FUNCTION__);
 		return -ETIMEDOUT;
@@ -413,13 +413,13 @@ static int init_mii_management_configuration(uec_t *uec_regs)
 static int init_phy(struct eth_device *dev)
 {
 	uec_private_t		*uec;
-	uec_t			*uec_regs;
+	uec_mii_t		*umii_regs;
 	struct uec_mii_info	*mii_info;
 	struct phy_info		*curphy;
 	int			err;
 
 	uec = (uec_private_t *)dev->priv;
-	uec_regs = uec->uec_regs;
+	umii_regs = uec->uec_mii_regs;
 
 	uec->oldlink = 0;
 	uec->oldspeed = 0;
@@ -451,19 +451,19 @@ static int init_phy(struct eth_device *dev)
 	mii_info->mii_id = uec->uec_info->phy_address;
 	mii_info->dev = dev;
 
-	mii_info->mdio_read = &read_phy_reg;
-	mii_info->mdio_write = &write_phy_reg;
+	mii_info->mdio_read = &uec_read_phy_reg;
+	mii_info->mdio_write = &uec_write_phy_reg;
 
 	uec->mii_info = mii_info;
 
-	if (init_mii_management_configuration(uec_regs)) {
+	if (init_mii_management_configuration(umii_regs)) {
 		printf("%s: The MII Bus is stuck!", dev->name);
 		err = -1;
 		goto bus_fail;
 	}
 
 	/* get info for this PHY */
-	curphy = get_phy_info(uec->mii_info);
+	curphy = uec_get_phy_info(uec->mii_info);
 	if (!curphy) {
 		printf("%s: No PHY found", dev->name);
 		err = -1;
@@ -989,6 +989,13 @@ static int uec_startup(uec_private_t *uec)
 	/* Setup MAC interface mode */
 	uec_set_mac_if_mode(uec, uec_info->enet_interface);
 
+	/* Setup MII management base */
+#ifndef CONFIG_eTSEC_MDIO_BUS
+	uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg);
+#else
+	uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS;
+#endif
+
 	/* Setup MII master clock source */
 	qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
 
@@ -1103,7 +1110,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 		if (dev->enetaddr[0] & 0x01) {
 			printf("%s: MacAddress is multcast address\n",
 				 __FUNCTION__);
-			return -EINVAL;
+			return 0;
 		}
 		uec_set_mac_address(uec, dev->enetaddr);
 		uec->the_first_run = 1;
@@ -1112,10 +1119,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 	err = uec_open(uec, COMM_DIR_RX_AND_TX);
 	if (err) {
 		printf("%s: cannot enable UEC device\n", dev->name);
-		return err;
+		return 0;
 	}
 
-	return 0;
+	return uec->mii_info->link;
 }
 
 static void uec_halt(struct eth_device* dev)
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 04950264b8..c384055ceb 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -675,6 +675,7 @@ typedef struct uec_private {
 	ucc_fast_private_t		*uccf;
 	struct eth_device		*dev;
 	uec_t				*uec_regs;
+	uec_mii_t			*uec_mii_regs;
 	/* enet init command parameter */
 	uec_init_cmd_pram_t		*p_init_enet_param;
 	u32				init_enet_param_offset;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 76fd38896a..ca6faa6ef4 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -60,14 +60,14 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
 /* Write value to the PHY for this device to the register at regnum, */
 /* waiting until the write is done before it returns.  All PHY */
 /* configuration has to be done through the TSEC1 MIIM regs */
-void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
+void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
 {
 	uec_private_t *ugeth = (uec_private_t *) dev->priv;
-	uec_t *ug_regs;
+	uec_mii_t *ug_regs;
 	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 	u32 tmp_reg;
 
-	ug_regs = ugeth->uec_regs;
+	ug_regs = ugeth->uec_mii_regs;
 
 	/* Stop the MII management read cycle */
 	out_be32 (&ug_regs->miimcom, 0);
@@ -87,15 +87,15 @@ void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
 /* Reads from register regnum in the PHY for device dev, */
 /* returning the value.  Clears miimcom first.  All PHY */
 /* configuration has to be done through the TSEC1 MIIM regs */
-int read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
+int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
 {
 	uec_private_t *ugeth = (uec_private_t *) dev->priv;
-	uec_t *ug_regs;
+	uec_mii_t *ug_regs;
 	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 	u32 tmp_reg;
 	u16 value;
 
-	ug_regs = ugeth->uec_regs;
+	ug_regs = ugeth->uec_mii_regs;
 
 	/* Setting up the MII Mangement Address Register */
 	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
@@ -521,7 +521,7 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
 /* Use the PHY ID registers to determine what type of PHY is attached
  * to device dev.  return a struct phy_info structure describing that PHY
  */
-struct phy_info *get_phy_info (struct uec_mii_info *mii_info)
+struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 {
 	u16 phy_reg;
 	u32 phy_ID;
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 9bd926ddd5..e59a940e0d 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -249,10 +249,10 @@ struct phy_info {
 	void (*close) (struct uec_mii_info * mii_info);
 };
 
-struct phy_info *get_phy_info (struct uec_mii_info *mii_info);
-void write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
+struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info);
+void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
 		    int value);
-int read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
+int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
 void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
 void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
 				  u32 interrupts);