diff options
| author | John Rigby <john.rigby@linaro.org> | 2011-04-19 10:42:39 +0000 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-05-12 19:09:07 +0200 |
| commit | 910f1ae3eb05533ac0c7f7fe5b31b50b91f7f0e1 (patch) | |
| tree | 9ef4f320297799db6bf99aa0ea5d29d2bcf492fb /drivers/serial/serial_pl01x.h | |
| parent | 264eaa0ea967bac32214b87d60cfc86c8b22cac6 (diff) | |
Serial: p1011: new vendor init options
Two new options:
CONFIG_PL011_SERIAL_RLCR
Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
have separate receive and transmit line control registers. Set
this variable to initialize the extra register.
CONFIG_PL011_SERIAL_FLUSH_ON_INIT
On some platforms (e.g. U8500) U-Boot is loaded by a second stage
boot loader that has already initialized the UART. Define this
variable to flush the UART at init time.
empty fifo on init
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Diffstat (limited to 'drivers/serial/serial_pl01x.h')
| -rw-r--r-- | drivers/serial/serial_pl01x.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h index b670c24e11..96ee3819ed 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x.h @@ -43,7 +43,11 @@ struct pl01x_regs { u32 pl010_lcrl; /* 0x10 Line control register, low byte */ u32 pl010_cr; /* 0x14 Control register */ u32 fr; /* 0x18 Flag register (Read only) */ +#ifdef CONFIG_PL011_SERIAL_RLCR + u32 pl011_rlcr; /* 0x1c Receive line control register */ +#else u32 reserved; +#endif u32 ilpr; /* 0x20 IrDA low-power counter register */ u32 pl011_ibrd; /* 0x24 Integer baud rate register */ u32 pl011_fbrd; /* 0x28 Fractional baud rate register */ |