nios2: Fix outx/writex parameter order in io.h

The outx/writex macros were using writex(addr, val) rather than
   the standard writex(val, addr), resulting in incompatibilty with
   architecture independent components. This change set uses standard
   parameter order.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>

3 files changed, 9 insertions, 9 deletions

diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c
index 9eccaa0c2a..fb28aa9eb9 100644
--- a/drivers/serial/altera_jtag_uart.c
+++ b/drivers/serial/altera_jtag_uart.c
@@ -40,7 +40,7 @@ void serial_putc (char c)
 {
 	while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
 		WATCHDOG_RESET ();
-	writel (&jtag->data, (unsigned char)c);
+	writel ((unsigned char)c, &jtag->data);
 }
 
 void serial_puts (const char *s)
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 995e37468c..045f1197a3 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -50,7 +50,7 @@ void serial_setbrg (void)
 	unsigned div;
 
 	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
-	writel (&uart->divisor,div);
+	writel (div, &uart->divisor);
 	return;
 }
 
@@ -71,7 +71,7 @@ void serial_putc (char c)
 		serial_putc ('\r');
 	while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
 		WATCHDOG_RESET ();
-	writel (&uart->txdata,(unsigned char)c);
+	writel ((unsigned char)c, &uart->txdata);
 }
 
 void serial_puts (const char *s)
diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c
index dacda5341e..f18f7f444e 100644
--- a/drivers/serial/opencores_yanu.c
+++ b/drivers/serial/opencores_yanu.c
@@ -61,7 +61,7 @@ void serial_setbrg (void)
 	    ((unsigned)CONFIG_SYS_CLK_FREQ >> k);
 
 	baud = best_m + best_n * YANU_BAUDE;
-	writel(&uart->baud, baud);
+	writel(baud, &uart->baud);
 
 	return;
 }
@@ -92,7 +92,7 @@ void serial_setbrg (void)
 	    ((unsigned)CONFIG_SYS_CLK_FREQ >> k);
 
 	baud = best_m + best_n * YANU_BAUDE;
-	writel(&uart->baud, baud);
+	writel(baud, &uart->baud);
 
 	return;
 }
@@ -113,7 +113,7 @@ int serial_init (void)
 		YANU_ACTION_RPE         |
 	    YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR;
 
-	writel(&uart->action, action);
+	writel(action, &uart->action);
 	
 	/*  control register cleanup */
 	/* no interrupts enabled */
@@ -127,7 +127,7 @@ int serial_init (void)
 	control |= YANU_CONTROL_RDYDLY * YANU_RXFIFO_DLY;
 	control |= YANU_CONTROL_TXTHR *  YANU_TXFIFO_THR;
 
-	writel(&uart->control, control);
+	writel(control, &uart->control);
 
 	/* to set baud rate */
 	serial_setbrg();
@@ -156,7 +156,7 @@ void serial_putc (char c)
 		WATCHDOG_RESET ();
 	}
 
-	writel(&uart->data, (unsigned char)c);
+	writel((unsigned char)c, &uart->data);
 }
 
 void serial_puts (const char *s)
@@ -182,7 +182,7 @@ int serial_getc (void)
 		WATCHDOG_RESET ();
 	
 	/* first we pull the char */
-	writel(&uart->action, YANU_ACTION_RFIFO_PULL);
+	writel(YANU_ACTION_RFIFO_PULL, &uart->action);
 
 	return(readl(&uart->data) & YANU_DATA_CHAR_MASK);
 }