serial: mxc: Code cleanup

- Remove space between #define to macro
- Add tab between macro and value

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 94 insertions, 97 deletions

diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 87f0281f3a..c8c36e5e19 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -15,99 +15,99 @@
 #include <linux/compiler.h>
 
 /* UART Control Register Bit Fields.*/
-#define  URXD_CHARRDY    (1<<15)
-#define  URXD_ERR        (1<<14)
-#define  URXD_OVRRUN     (1<<13)
-#define  URXD_FRMERR     (1<<12)
-#define  URXD_BRK        (1<<11)
-#define  URXD_PRERR      (1<<10)
-#define  URXD_RX_DATA    (0xFF)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
-#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
-#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
-#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
-#define  UCR1_RRDYEN     (1<<9)	 /* Recv ready interrupt enable */
-#define  UCR1_RDMAEN     (1<<8)	 /* Recv ready DMA enable */
-#define  UCR1_IREN       (1<<7)	 /* Infrared interface enable */
-#define  UCR1_TXMPTYEN   (1<<6)	 /* Transimitter empty interrupt enable */
-#define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
-#define  UCR1_SNDBRK     (1<<4)	 /* Send break */
-#define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
-#define  UCR1_DOZE       (1<<1)	 /* Doze */
-#define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
-#define  UCR2_ESCI	 (1<<15) /* Escape seq interrupt enable */
-#define  UCR2_IRTS	 (1<<14) /* Ignore RTS pin */
-#define  UCR2_CTSC	 (1<<13) /* CTS pin control */
-#define  UCR2_CTS        (1<<12) /* Clear to send */
-#define  UCR2_ESCEN      (1<<11) /* Escape enable */
-#define  UCR2_PREN       (1<<8)  /* Parity enable */
-#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
-#define  UCR2_STPB       (1<<6)	 /* Stop */
-#define  UCR2_WS         (1<<5)	 /* Word size */
-#define  UCR2_RTSEN      (1<<4)	 /* Request to send interrupt enable */
-#define  UCR2_TXEN       (1<<2)	 /* Transmitter enabled */
-#define  UCR2_RXEN       (1<<1)	 /* Receiver enabled */
-#define  UCR2_SRST	 (1<<0)	 /* SW reset */
-#define  UCR3_DTREN	 (1<<13) /* DTR interrupt enable */
-#define  UCR3_PARERREN   (1<<12) /* Parity enable */
-#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
-#define  UCR3_DSR        (1<<10) /* Data set ready */
-#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
-#define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_ADNIMP     (1<<7)  /* Autobaud Detection Not Improved */
-#define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
-#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
-#define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30	 (1<<2)  /* Ref Freq 30 MHz */
-#define  UCR3_INVT	 (1<<1)  /* Inverted Infrared transmission */
-#define  UCR3_BPEN	 (1<<0)  /* Preset registers enable */
-#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
-#define  UCR4_INVR	 (1<<9)  /* Inverted infrared reception */
-#define  UCR4_ENIRI	 (1<<8)  /* Serial infrared interrupt enable */
-#define  UCR4_WKEN	 (1<<7)  /* Wake interrupt enable */
-#define  UCR4_REF16	 (1<<6)  /* Ref freq 16 MHz */
-#define  UCR4_IRSC	 (1<<5)  /* IR special case */
-#define  UCR4_TCEN	 (1<<3)  /* Transmit complete interrupt enable */
-#define  UCR4_BKEN	 (1<<2)  /* Break condition interrupt enable */
-#define  UCR4_OREN	 (1<<1)  /* Receiver overrun interrupt enable */
-#define  UCR4_DREN	 (1<<0)  /* Recv data ready interrupt enable */
-#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
-#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
-#define  UFCR_RFDIV_SHF  7      /* Reference freq divider shift */
-#define RFDIV		4 /* divide input clock by 2 */
-#define  UFCR_DCEDTE	 (1<<6)  /* DTE mode select */
-#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
-#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
-#define  USR1_RTSS	 (1<<14) /* RTS pin status */
-#define  USR1_TRDY	 (1<<13) /* Transmitter ready interrupt/dma flag */
-#define  USR1_RTSD	 (1<<12) /* RTS delta */
-#define  USR1_ESCF	 (1<<11) /* Escape seq interrupt flag */
-#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
-#define  USR1_RRDY       (1<<9)	 /* Receiver ready interrupt/dma flag */
-#define  USR1_TIMEOUT    (1<<7)	 /* Receive timeout interrupt status */
-#define  USR1_RXDS	 (1<<6)	 /* Receiver idle interrupt flag */
-#define  USR1_AIRINT	 (1<<5)	 /* Async IR wake interrupt flag */
-#define  USR1_AWAKE	 (1<<4)	 /* Aysnc wake interrupt flag */
-#define  USR2_ADET	 (1<<15) /* Auto baud rate detect complete */
-#define  USR2_TXFE	 (1<<14) /* Transmit buffer FIFO empty */
-#define  USR2_DTRF	 (1<<13) /* DTR edge interrupt flag */
-#define  USR2_IDLE	 (1<<12) /* Idle condition */
-#define  USR2_IRINT	 (1<<8)	 /* Serial infrared interrupt flag */
-#define  USR2_WAKE	 (1<<7)	 /* Wake */
-#define  USR2_RTSF	 (1<<4)	 /* RTS edge interrupt flag */
-#define  USR2_TXDC	 (1<<3)	 /* Transmitter complete */
-#define  USR2_BRCD	 (1<<2)	 /* Break condition */
-#define  USR2_ORE        (1<<1)	 /* Overrun error */
-#define  USR2_RDR        (1<<0)	 /* Recv data ready */
-#define  UTS_FRCPERR	 (1<<13) /* Force parity error */
-#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
-#define  UTS_TXEMPTY	 (1<<6)	 /* TxFIFO empty */
-#define  UTS_RXEMPTY	 (1<<5)	 /* RxFIFO empty */
-#define  UTS_TXFULL	 (1<<4)	 /* TxFIFO full */
-#define  UTS_RXFULL	 (1<<3)	 /* RxFIFO full */
-#define  UTS_SOFTRS	(1<<0)	 /* Software reset */
+#define URXD_CHARRDY	(1<<15)
+#define URXD_ERR	(1<<14)
+#define URXD_OVRRUN	(1<<13)
+#define URXD_FRMERR	(1<<12)
+#define URXD_BRK	(1<<11)
+#define URXD_PRERR	(1<<10)
+#define URXD_RX_DATA	(0xFF)
+#define UCR1_ADEN	(1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR	(1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN	(1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN	(1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN	(1<<9)	/* Recv ready interrupt enable */
+#define UCR1_RDMAEN	(1<<8)	/* Recv ready DMA enable */
+#define UCR1_IREN	(1<<7)	/* Infrared interface enable */
+#define UCR1_TXMPTYEN	(1<<6)	/* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN	(1<<5)	/* RTS delta interrupt enable */
+#define UCR1_SNDBRK	(1<<4)	/* Send break */
+#define UCR1_TDMAEN	(1<<3)	/* Transmitter ready DMA enable */
+#define UCR1_UARTCLKEN	(1<<2)	/* UART clock enabled */
+#define UCR1_DOZE	(1<<1)	/* Doze */
+#define UCR1_UARTEN	(1<<0)	/* UART enabled */
+#define UCR2_ESCI	(1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS	(1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC	(1<<13) /* CTS pin control */
+#define UCR2_CTS	(1<<12) /* Clear to send */
+#define UCR2_ESCEN	(1<<11) /* Escape enable */
+#define UCR2_PREN	(1<<8)  /* Parity enable */
+#define UCR2_PROE	(1<<7)  /* Parity odd/even */
+#define UCR2_STPB	(1<<6)	/* Stop */
+#define UCR2_WS		(1<<5)	/* Word size */
+#define UCR2_RTSEN	(1<<4)	/* Request to send interrupt enable */
+#define UCR2_TXEN	(1<<2)	/* Transmitter enabled */
+#define UCR2_RXEN	(1<<1)	/* Receiver enabled */
+#define UCR2_SRST	(1<<0)	/* SW reset */
+#define UCR3_DTREN	(1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN	(1<<12) /* Parity enable */
+#define UCR3_FRAERREN	(1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR	(1<<10) /* Data set ready */
+#define UCR3_DCD	(1<<9)  /* Data carrier detect */
+#define UCR3_RI		(1<<8)  /* Ring indicator */
+#define UCR3_ADNIMP	(1<<7)  /* Autobaud Detection Not Improved */
+#define UCR3_RXDSEN	(1<<6)  /* Receive status interrupt enable */
+#define UCR3_AIRINTEN	(1<<5)  /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN	(1<<4)  /* Async wake interrupt enable */
+#define UCR3_REF25	(1<<3)  /* Ref freq 25 MHz */
+#define UCR3_REF30	(1<<2)  /* Ref Freq 30 MHz */
+#define UCR3_INVT	(1<<1)  /* Inverted Infrared transmission */
+#define UCR3_BPEN	(1<<0)  /* Preset registers enable */
+#define UCR4_CTSTL_32	(32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_INVR	(1<<9)  /* Inverted infrared reception */
+#define UCR4_ENIRI	(1<<8)  /* Serial infrared interrupt enable */
+#define UCR4_WKEN	(1<<7)  /* Wake interrupt enable */
+#define UCR4_REF16	(1<<6)  /* Ref freq 16 MHz */
+#define UCR4_IRSC	(1<<5)  /* IR special case */
+#define UCR4_TCEN	(1<<3)  /* Transmit complete interrupt enable */
+#define UCR4_BKEN	(1<<2)  /* Break condition interrupt enable */
+#define UCR4_OREN	(1<<1)  /* Receiver overrun interrupt enable */
+#define UCR4_DREN	(1<<0)  /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF	0       /* Receiver trigger level shift */
+#define UFCR_RFDIV	(7<<7)  /* Reference freq divider mask */
+#define UFCR_RFDIV_SHF	7	/* Reference freq divider shift */
+#define RFDIV		4	/* divide input clock by 2 */
+#define UFCR_DCEDTE	(1<<6)  /* DTE mode select */
+#define UFCR_TXTL_SHF	10      /* Transmitter trigger level shift */
+#define USR1_PARITYERR	(1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS	(1<<14) /* RTS pin status */
+#define USR1_TRDY	(1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD	(1<<12) /* RTS delta */
+#define USR1_ESCF	(1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR	(1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY	(1<<9)	/* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT	(1<<7)	/* Receive timeout interrupt status */
+#define USR1_RXDS	(1<<6)	/* Receiver idle interrupt flag */
+#define USR1_AIRINT	(1<<5)	/* Async IR wake interrupt flag */
+#define USR1_AWAKE	(1<<4)	/* Aysnc wake interrupt flag */
+#define USR2_ADET	(1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE	(1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF	(1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE	(1<<12) /* Idle condition */
+#define USR2_IRINT	(1<<8)	/* Serial infrared interrupt flag */
+#define USR2_WAKE	(1<<7)	/* Wake */
+#define USR2_RTSF	(1<<4)	/* RTS edge interrupt flag */
+#define USR2_TXDC	(1<<3)	/* Transmitter complete */
+#define USR2_BRCD	(1<<2)	/* Break condition */
+#define USR2_ORE	(1<<1)	/* Overrun error */
+#define USR2_RDR	(1<<0)	/* Recv data ready */
+#define UTS_FRCPERR	(1<<13) /* Force parity error */
+#define UTS_LOOP	(1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY	(1<<6)	/* TxFIFO empty */
+#define UTS_RXEMPTY	(1<<5)	/* RxFIFO empty */
+#define UTS_TXFULL	(1<<4)	/* TxFIFO full */
+#define UTS_RXFULL	(1<<3)	/* RxFIFO full */
+#define UTS_SOFTRS	(1<<0)	/* Software reset */
 #define TXTL		2  /* reset default */
 #define RXTL		1  /* reset default */
 
@@ -212,9 +212,7 @@ static void mxc_serial_putc(const char c)
 		WATCHDOG_RESET();
 }
 
-/*
- * Test whether a character is in the RX buffer
- */
+/* Test whether a character is in the RX buffer */
 static int mxc_serial_tstc(void)
 {
 	/* If receive fifo is empty, return false */
@@ -226,7 +224,6 @@ static int mxc_serial_tstc(void)
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
  */
 static int mxc_serial_init(void)
 {