Merge branch 'master' of git://www.denx.de/git/u-boot

4 files changed, 28 insertions, 22 deletions

diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 88f3eb10ab..5eb4f458f8 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -63,8 +63,8 @@ int serial_init(void)
 	uart->umr = UART_UMR_SB_STOP_BITS_1;
 
 	/* Setting up BaudRate */
-	counter = (u32) (gd->bus_clk / (gd->baudrate));
-	counter >>= 5;
+	counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
+	counter = counter / gd->baudrate;
 
 	/* write to CTUR: divide counter upper byte */
 	uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 182ca2d149..8bbfcf9c0c 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -147,10 +147,11 @@ static int calc_divisor (NS16550_t port)
 
 	/* Compute divisor value. Normally, we should simply return:
 	 *   CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
-	 * but we need to round that value by adding 0.5 or 8/16.
+	 * but we need to round that value by adding 0.5.
 	 * Rounding is especially important at high baud rates.
 	 */
-	return (((16 * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate) + 8) / 16;
+	return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+		(MODE_X_DIV * gd->baudrate);
 }
 
 #if !defined(CONFIG_SERIAL_MULTI)
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index d678ab6b76..74546ce846 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -1,6 +1,8 @@
 /*
- * (C) Copyright 2004 Atmark Techno, Inc.
+ * (C) Copyright 2008 Michal Simek <monstr@monstr.eu>
+ * Clean driver and add xilinx constant from header file
  *
+ * (C) Copyright 2004 Atmark Techno, Inc.
  * Yasushi SHOJI <yashi@atmark-techno.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -13,7 +15,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -23,19 +25,21 @@
  */
 
 #include <config.h>
+#include <asm/io.h>
 
 #ifdef	CONFIG_XILINX_UARTLITE
 
-#include <asm/serial_xuartlite.h>
+#define RX_FIFO_OFFSET		0 /* receive FIFO, read only */
+#define TX_FIFO_OFFSET		4 /* transmit FIFO, write only */
+#define STATUS_REG_OFFSET	8 /* status register, read only */
 
-/* FIXME: we should convert these to in32 and out32 */
-#define IO_WORD(offset)	     (*(volatile unsigned long *)(offset))
-#define IO_SERIAL(offset)    IO_WORD(CONFIG_SERIAL_BASE + (offset))
+#define SR_TX_FIFO_FULL		0x08 /* transmit FIFO full */
+#define SR_RX_FIFO_VALID_DATA	0x01 /* data in receive FIFO */
+#define SR_RX_FIFO_FULL		0x02 /* receive FIFO full */
 
-#define IO_SERIAL_RX_FIFO   IO_SERIAL(XUL_RX_FIFO_OFFSET)
-#define IO_SERIAL_TX_FIFO   IO_SERIAL(XUL_TX_FIFO_OFFSET)
-#define IO_SERIAL_STATUS    IO_SERIAL(XUL_STATUS_REG_OFFSET)
-#define IO_SERIAL_CONTROL   IO_SERIAL(XUL_CONTROL_REG_OFFSET)
+#define UARTLITE_STATUS		(CONFIG_SERIAL_BASE + STATUS_REG_OFFSET)
+#define UARTLITE_TX_FIFO	(CONFIG_SERIAL_BASE + TX_FIFO_OFFSET)
+#define UARTLITE_RX_FIFO	(CONFIG_SERIAL_BASE + RX_FIFO_OFFSET)
 
 int serial_init(void)
 {
@@ -50,9 +54,10 @@ void serial_setbrg(void)
 
 void serial_putc(const char c)
 {
-	if (c == '\n') serial_putc('\r');
-	while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL);
-	IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff);
+	if (c == '\n')
+		serial_putc('\r');
+	while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL);
+	out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
 }
 
 void serial_puts(const char * s)
@@ -64,13 +69,13 @@ void serial_puts(const char * s)
 
 int serial_getc(void)
 {
-	while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA));
-	return IO_SERIAL_RX_FIFO & 0xff;
+	while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
+	return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff;
 }
 
 int serial_tstc(void)
 {
-	return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
+	return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
 }
 
 #endif	/* CONFIG_MICROBLZE */
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index cc2bdac479..2bc5c3c838 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -529,8 +529,8 @@ int drv_usbtty_init (void)
 	}
 	snlen = strlen(sn);
 	if (snlen > sizeof(serial_number) - 1) {
-		printf ("Warning: serial number %s is too long (%d > %d)\n",
-			sn, snlen, sizeof(serial_number) - 1);
+		printf ("Warning: serial number %s is too long (%d > %lu)\n",
+			sn, snlen, (ulong)(sizeof(serial_number) - 1));
 		snlen = sizeof(serial_number) - 1;
 	}
 	memcpy (serial_number, sn, snlen);