treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()

Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

7 files changed, 7 insertions, 7 deletions

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index b120664661..c65733c87a 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -351,7 +351,7 @@ static int atmel_spi_probe(struct udevice *bus)
 	if (ret)
 		return ret;
 
-	bus_plat->regs = (struct at91_spi *)devfdt_get_addr(bus);
+	bus_plat->regs = dev_read_addr_ptr(bus);
 
 #if CONFIG_IS_ENABLED(DM_GPIO)
 	struct atmel_spi_priv *priv = dev_get_priv(bus);
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index c9b14f9029..2559aac2e9 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -157,7 +157,7 @@ static int dw_spi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct dw_spi_platdata *plat = bus->platdata;
 
-	plat->regs = (struct dw_spi *)devfdt_get_addr(bus);
+	plat->regs = dev_read_addr_ptr(bus);
 
 	/* Use 500KHz as a suitable default */
 	plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index 746686a18a..d338ff5a0b 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -257,7 +257,7 @@ static int exynos_spi_ofdata_to_platdata(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
 
-	plat->regs = (struct exynos_spi *)devfdt_get_addr(bus);
+	plat->regs = dev_read_addr_ptr(bus);
 	plat->periph_id = pinmux_decode_periph_id(blob, node);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index 92dc2e13c5..dc7d2bc1f0 100644
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -236,7 +236,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
 	const struct mvebu_spi_dev *drvdata =
 		(struct mvebu_spi_dev *)dev_get_driver_data(bus);
 
-	plat->spireg = (struct kwspi_registers *)devfdt_get_addr(bus);
+	plat->spireg = dev_read_addr_ptr(bus);
 	plat->is_errata_50mhz_ac = drvdata->is_errata_50mhz_ac;
 
 	return 0;
diff --git a/drivers/spi/mtk_snfi_spi.c b/drivers/spi/mtk_snfi_spi.c
index 2a89476515..c30c8f4ff6 100644
--- a/drivers/spi/mtk_snfi_spi.c
+++ b/drivers/spi/mtk_snfi_spi.c
@@ -253,7 +253,7 @@ static int mtk_snfi_spi_probe(struct udevice *bus)
 	struct mtk_snfi_priv *priv = dev_get_priv(bus);
 	int ret;
 
-	priv->base = (void __iomem *)devfdt_get_addr(bus);
+	priv->base = dev_read_addr_ptr(bus);
 	if (!priv->base)
 		return -EINVAL;
 
diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c
index 2302e62be4..e860b9ec64 100644
--- a/drivers/spi/mvebu_a3700_spi.c
+++ b/drivers/spi/mvebu_a3700_spi.c
@@ -255,7 +255,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
 	struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
 	int ret;
 
-	plat->spireg = (struct spi_reg *)devfdt_get_addr(bus);
+	plat->spireg = dev_read_addr_ptr(bus);
 
 	ret = clk_get_by_index(bus, 0, &plat->clk);
 	if (ret) {
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 78ffd3e2fe..9923931e36 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -77,7 +77,7 @@ static int zynq_spi_ofdata_to_platdata(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
 
-	plat->regs = (struct zynq_spi_regs *)devfdt_get_addr(bus);
+	plat->regs = dev_read_addr_ptr(bus);
 
 	/* FIXME: Use 250MHz as a suitable default */
 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",