dm: tpm: Move tpm_tis_i2c to tpm_i2c_infineon

As there is no TCG specification or recommendation for i2c TPM 1.2,
move tpm_tis_i2c driver to tpm_i2c_infineon. Other tpm vendors like Atmel
or STMicroelectronics may have a different transport protocol for i2c.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>

1 files changed, 623 insertions, 0 deletions

diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c
new file mode 100644
index 0000000000..88eb7869bc
--- /dev/null
+++ b/drivers/tpm/tpm_tis_infineon.c
@@ -0,0 +1,623 @@
+/*
+ * Copyright (C) 2011 Infineon Technologies
+ *
+ * Authors:
+ * Peter Huewe <huewe.external@infineon.com>
+ *
+ * Description:
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This device driver implements the TPM interface as defined in
+ * the TCG TPM Interface Spec version 1.2, revision 1.0 and the
+ * Infineon I2C Protocol Stack Specification v0.20.
+ *
+ * It is based on the Linux kernel driver tpm.c from Leendert van
+ * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall.
+ *
+ * Version: 2.1.1
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <tis.h>
+#include <tpm.h>
+#include <asm-generic/errno.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/unaligned/be_byteshift.h>
+
+#include "tpm_tis_infineon.h"
+#include "tpm_internal.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const char * const chip_name[] = {
+	[SLB9635] = "slb9635tt",
+	[SLB9645] = "slb9645tt",
+	[UNKNOWN] = "unknown/fallback to slb9635",
+};
+
+/*
+ * tpm_tis_i2c_read() - read from TPM register
+ * @addr: register address to read from
+ * @buffer: provided by caller
+ * @len: number of bytes to read
+ *
+ * Read len bytes from TPM register and put them into
+ * buffer (little-endian format, i.e. first byte is put into buffer[0]).
+ *
+ * NOTE: TPM is big-endian for multi-byte values. Multi-byte
+ * values have to be swapped.
+ *
+ * Return -EIO on error, 0 on success.
+ */
+static int tpm_tis_i2c_read(struct udevice *dev, u8 addr, u8 *buffer,
+			    size_t len)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int rc;
+	int count;
+	uint32_t addrbuf = addr;
+
+	if ((chip->chip_type == SLB9635) || (chip->chip_type == UNKNOWN)) {
+		/* slb9635 protocol should work in both cases */
+		for (count = 0; count < MAX_COUNT; count++) {
+			rc = dm_i2c_write(dev, 0, (uchar *)&addrbuf, 1);
+			if (rc == 0)
+				break;  /* Success, break to skip sleep */
+			udelay(SLEEP_DURATION_US);
+		}
+		if (rc)
+			return rc;
+
+		/* After the TPM has successfully received the register address
+		 * it needs some time, thus we're sleeping here again, before
+		 * retrieving the data
+		 */
+		for (count = 0; count < MAX_COUNT; count++) {
+			udelay(SLEEP_DURATION_US);
+			rc = dm_i2c_read(dev, 0, buffer, len);
+			if (rc == 0)
+				break;  /* success, break to skip sleep */
+		}
+	} else {
+		/*
+		 * Use a combined read for newer chips.
+		 * Unfortunately the smbus functions are not suitable due to
+		 * the 32 byte limit of the smbus.
+		 * Retries should usually not be needed, but are kept just to
+		 * be safe on the safe side.
+		 */
+		for (count = 0; count < MAX_COUNT; count++) {
+			rc = dm_i2c_read(dev, addr, buffer, len);
+			if (rc == 0)
+				break;  /* break here to skip sleep */
+			udelay(SLEEP_DURATION_US);
+		}
+	}
+
+	/* Take care of 'guard time' */
+	udelay(SLEEP_DURATION_US);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int tpm_tis_i2c_write_generic(struct udevice *dev, u8 addr,
+				     const u8 *buffer, size_t len,
+				     unsigned int sleep_time_us, u8 max_count)
+{
+	struct tpm_chip_priv *priv = dev_get_uclass_priv(dev);
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int rc = 0;
+	int count;
+
+	if (chip->chip_type == SLB9635) {
+		/* Prepare send buffer to include the address */
+		priv->buf[0] = addr;
+		memcpy(&(priv->buf[1]), buffer, len);
+		buffer = priv->buf;
+		len++;
+		addr = 0;
+	}
+
+	for (count = 0; count < max_count; count++) {
+		rc = dm_i2c_write(dev, addr, buffer, len);
+		if (rc == 0)
+			break;  /* Success, break to skip sleep */
+		udelay(sleep_time_us);
+	}
+
+	/* take care of 'guard time' */
+	udelay(sleep_time_us);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+/*
+ * tpm_tis_i2c_write() - write to TPM register
+ * @addr: register address to write to
+ * @buffer: containing data to be written
+ * @len: number of bytes to write
+ *
+ * Write len bytes from provided buffer to TPM register (little
+ * endian format, i.e. buffer[0] is written as first byte).
+ *
+ * NOTE: TPM is big-endian for multi-byte values. Multi-byte
+ * values have to be swapped.
+ *
+ * NOTE: use this function instead of the tpm_tis_i2c_write_generic function.
+ *
+ * Return -EIO on error, 0 on success
+ */
+static int tpm_tis_i2c_write(struct udevice *dev, u8 addr, const u8 *buffer,
+			     size_t len)
+{
+	return tpm_tis_i2c_write_generic(dev, addr, buffer, len,
+					 SLEEP_DURATION_US, MAX_COUNT);
+}
+
+/*
+ * This function is needed especially for the cleanup situation after
+ * sending TPM_READY
+ */
+static int tpm_tis_i2c_write_long(struct udevice *dev, u8 addr, u8 *buffer,
+				  size_t len)
+{
+	return tpm_tis_i2c_write_generic(dev, addr, buffer, len,
+					 SLEEP_DURATION_LONG_US,
+					 MAX_COUNT_LONG);
+}
+
+static int tpm_tis_i2c_check_locality(struct udevice *dev, int loc)
+{
+	const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID;
+	struct tpm_chip *chip = dev_get_priv(dev);
+	u8 buf;
+	int rc;
+
+	rc = tpm_tis_i2c_read(dev, TPM_ACCESS(loc), &buf, 1);
+	if (rc < 0)
+		return rc;
+
+	if ((buf & mask) == mask) {
+		chip->locality = loc;
+		return loc;
+	}
+
+	return -ENOENT;
+}
+
+static void tpm_tis_i2c_release_locality(struct udevice *dev, int loc,
+					 int force)
+{
+	const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID;
+	u8 buf;
+
+	if (tpm_tis_i2c_read(dev, TPM_ACCESS(loc), &buf, 1) < 0)
+		return;
+
+	if (force || (buf & mask) == mask) {
+		buf = TPM_ACCESS_ACTIVE_LOCALITY;
+		tpm_tis_i2c_write(dev, TPM_ACCESS(loc), &buf, 1);
+	}
+}
+
+static int tpm_tis_i2c_request_locality(struct udevice *dev, int loc)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	unsigned long start, stop;
+	u8 buf = TPM_ACCESS_REQUEST_USE;
+	int rc;
+
+	rc = tpm_tis_i2c_check_locality(dev, loc);
+	if (rc >= 0) {
+		debug("%s: Already have locality\n", __func__);
+		return loc;  /* We already have the locality */
+	} else if (rc != -ENOENT) {
+		debug("%s: Failed to get locality: %d\n", __func__, rc);
+		return rc;
+	}
+
+	rc = tpm_tis_i2c_write(dev, TPM_ACCESS(loc), &buf, 1);
+	if (rc) {
+		debug("%s: Failed to write to TPM: %d\n", __func__, rc);
+		return rc;
+	}
+
+	/* Wait for burstcount */
+	start = get_timer(0);
+	stop = chip->timeout_a;
+	do {
+		rc = tpm_tis_i2c_check_locality(dev, loc);
+		if (rc >= 0) {
+			debug("%s: Have locality\n", __func__);
+			return loc;
+		} else if (rc != -ENOENT) {
+			debug("%s: Failed to get locality: %d\n", __func__, rc);
+			return rc;
+		}
+		mdelay(TPM_TIMEOUT_MS);
+	} while (get_timer(start) < stop);
+	debug("%s: Timeout getting locality: %d\n", __func__, rc);
+
+	return rc;
+}
+
+static u8 tpm_tis_i2c_status(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	/* NOTE: Since i2c read may fail, return 0 in this case --> time-out */
+	u8 buf;
+
+	if (tpm_tis_i2c_read(dev, TPM_STS(chip->locality), &buf, 1) < 0)
+		return 0;
+	else
+		return buf;
+}
+
+static int tpm_tis_i2c_ready(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int rc;
+
+	/* This causes the current command to be aborted */
+	u8 buf = TPM_STS_COMMAND_READY;
+
+	debug("%s\n", __func__);
+	rc = tpm_tis_i2c_write_long(dev, TPM_STS(chip->locality), &buf, 1);
+	if (rc)
+		debug("%s: rc=%d\n", __func__, rc);
+
+	return rc;
+}
+
+static ssize_t tpm_tis_i2c_get_burstcount(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	unsigned long start, stop;
+	ssize_t burstcnt;
+	u8 addr, buf[3];
+
+	/* Wait for burstcount */
+	/* XXX: Which timeout value? Spec has 2 answers (c & d) */
+	start = get_timer(0);
+	stop = chip->timeout_d;
+	do {
+		/* Note: STS is little endian */
+		addr = TPM_STS(chip->locality) + 1;
+		if (tpm_tis_i2c_read(dev, addr, buf, 3) < 0)
+			burstcnt = 0;
+		else
+			burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
+
+		if (burstcnt)
+			return burstcnt;
+		mdelay(TPM_TIMEOUT_MS);
+	} while (get_timer(start) < stop);
+
+	return -EBUSY;
+}
+
+static int tpm_tis_i2c_wait_for_stat(struct udevice *dev, u8 mask,
+				     unsigned long timeout, int *status)
+{
+	unsigned long start, stop;
+
+	/* Check current status */
+	*status = tpm_tis_i2c_status(dev);
+	if ((*status & mask) == mask)
+		return 0;
+
+	start = get_timer(0);
+	stop = timeout;
+	do {
+		mdelay(TPM_TIMEOUT_MS);
+		*status = tpm_tis_i2c_status(dev);
+		if ((*status & mask) == mask)
+			return 0;
+	} while (get_timer(start) < stop);
+
+	return -ETIMEDOUT;
+}
+
+static int tpm_tis_i2c_recv_data(struct udevice *dev, u8 *buf, size_t count)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	size_t size = 0;
+	ssize_t burstcnt;
+	int rc;
+
+	while (size < count) {
+		burstcnt = tpm_tis_i2c_get_burstcount(dev);
+
+		/* burstcount < 0 -> tpm is busy */
+		if (burstcnt < 0)
+			return burstcnt;
+
+		/* Limit received data to max left */
+		if (burstcnt > (count - size))
+			burstcnt = count - size;
+
+		rc = tpm_tis_i2c_read(dev, TPM_DATA_FIFO(chip->locality),
+				      &(buf[size]), burstcnt);
+		if (rc == 0)
+			size += burstcnt;
+	}
+
+	return size;
+}
+
+static int tpm_tis_i2c_recv(struct udevice *dev, u8 *buf, size_t count)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int size = 0;
+	int expected, status;
+	int rc;
+
+	status = tpm_tis_i2c_status(dev);
+	if (status == TPM_STS_COMMAND_READY)
+		return -EINTR;
+	if ((status & (TPM_STS_DATA_AVAIL | TPM_STS_VALID)) !=
+	    (TPM_STS_DATA_AVAIL | TPM_STS_VALID))
+		return -EAGAIN;
+
+	debug("...got it;\n");
+
+	/* Read first 10 bytes, including tag, paramsize, and result */
+	size = tpm_tis_i2c_recv_data(dev, buf, TPM_HEADER_SIZE);
+	if (size < TPM_HEADER_SIZE) {
+		debug("Unable to read header\n");
+		return size < 0 ? size : -EIO;
+	}
+
+	expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE);
+	if ((size_t)expected > count) {
+		debug("Error size=%x, expected=%x, count=%x\n", size, expected,
+		      count);
+		return -ENOSPC;
+	}
+
+	size += tpm_tis_i2c_recv_data(dev, &buf[TPM_HEADER_SIZE],
+				      expected - TPM_HEADER_SIZE);
+	if (size < expected) {
+		debug("Unable to read remainder of result\n");
+		return -ETIMEDOUT;
+	}
+
+	rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID, chip->timeout_c,
+				       &status);
+	if (rc)
+		return rc;
+	if (status & TPM_STS_DATA_AVAIL) {  /* Retry? */
+		debug("Error left over data\n");
+		return -EIO;
+	}
+
+	return size;
+}
+
+static int tpm_tis_i2c_send(struct udevice *dev, const u8 *buf, size_t len)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int rc, status;
+	size_t burstcnt;
+	size_t count = 0;
+	int retry = 0;
+	u8 sts = TPM_STS_GO;
+
+	debug("%s: len=%d\n", __func__, len);
+	if (len > TPM_DEV_BUFSIZE)
+		return -E2BIG;  /* Command is too long for our tpm, sorry */
+
+	if (tpm_tis_i2c_request_locality(dev, 0) < 0)
+		return -EBUSY;
+
+	status = tpm_tis_i2c_status(dev);
+	if ((status & TPM_STS_COMMAND_READY) == 0) {
+		rc = tpm_tis_i2c_ready(dev);
+		if (rc)
+			return rc;
+		rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_COMMAND_READY,
+					       chip->timeout_b, &status);
+		if (rc)
+			return rc;
+	}
+
+	burstcnt = tpm_tis_i2c_get_burstcount(dev);
+
+	/* burstcount < 0 -> tpm is busy */
+	if (burstcnt < 0)
+		return burstcnt;
+
+	while (count < len) {
+		udelay(300);
+		if (burstcnt > len - count)
+			burstcnt = len - count;
+
+#ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+		if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN)
+			burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN;
+#endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */
+
+		rc = tpm_tis_i2c_write(dev, TPM_DATA_FIFO(chip->locality),
+				       &(buf[count]), burstcnt);
+		if (rc == 0)
+			count += burstcnt;
+		else {
+			debug("%s: error\n", __func__);
+			if (retry++ > 10)
+				return -EIO;
+			rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID,
+						       chip->timeout_c,
+						       &status);
+			if (rc)
+				return rc;
+
+			if ((status & TPM_STS_DATA_EXPECT) == 0)
+				return -EIO;
+		}
+	}
+
+	/* Go and do it */
+	rc = tpm_tis_i2c_write(dev, TPM_STS(chip->locality), &sts, 1);
+	if (rc < 0)
+		return rc;
+	debug("%s: done, rc=%d\n", __func__, rc);
+
+	return len;
+}
+
+static int tpm_tis_i2c_cleanup(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+
+	tpm_tis_i2c_ready(dev);
+	/*
+	 * The TPM needs some time to clean up here,
+	 * so we sleep rather than keeping the bus busy
+	 */
+	mdelay(2);
+	tpm_tis_i2c_release_locality(dev, chip->locality, 0);
+
+	return 0;
+}
+
+static int tpm_tis_i2c_init(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	u32 vendor;
+	u32 expected_did_vid;
+	int rc;
+
+	chip->is_open = 1;
+
+	/* Default timeouts - these could move to the device tree */
+	chip->timeout_a = TIS_SHORT_TIMEOUT_MS;
+	chip->timeout_b = TIS_LONG_TIMEOUT_MS;
+	chip->timeout_c = TIS_SHORT_TIMEOUT_MS;
+	chip->timeout_d = TIS_SHORT_TIMEOUT_MS;
+
+	rc = tpm_tis_i2c_request_locality(dev, 0);
+	if (rc < 0)
+		return rc;
+
+	/* Read four bytes from DID_VID register */
+	if (tpm_tis_i2c_read(dev, TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) {
+		tpm_tis_i2c_release_locality(dev, 0, 1);
+		return -EIO;
+	}
+
+	if (chip->chip_type == SLB9635) {
+		vendor = be32_to_cpu(vendor);
+		expected_did_vid = TPM_TIS_I2C_DID_VID_9635;
+	} else {
+		/* device id and byte order has changed for newer i2c tpms */
+		expected_did_vid = TPM_TIS_I2C_DID_VID_9645;
+	}
+
+	if (chip->chip_type != UNKNOWN && vendor != expected_did_vid) {
+		error("Vendor id did not match! ID was %08x\n", vendor);
+		return -ENODEV;
+	}
+
+	chip->vend_dev = vendor;
+	debug("1.2 TPM (chip type %s device-id 0x%X)\n",
+	      chip_name[chip->chip_type], vendor >> 16);
+
+	/*
+	 * A timeout query to TPM can be placed here.
+	 * Standard timeout values are used so far
+	 */
+
+	return 0;
+}
+
+static int tpm_tis_i2c_open(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+	int rc;
+
+	debug("%s: start\n", __func__);
+	if (chip->is_open)
+		return -EBUSY;
+	rc = tpm_tis_i2c_init(dev);
+	if (rc < 0)
+		chip->is_open = 0;
+
+	return rc;
+}
+
+static int tpm_tis_i2c_close(struct udevice *dev)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+
+	if (chip->is_open) {
+		tpm_tis_i2c_release_locality(dev, chip->locality, 1);
+		chip->is_open = 0;
+		chip->vend_dev = 0;
+	}
+
+	return 0;
+}
+
+static int tpm_tis_get_desc(struct udevice *dev, char *buf, int size)
+{
+	struct tpm_chip *chip = dev_get_priv(dev);
+
+	if (size < 50)
+		return -ENOSPC;
+
+	return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)",
+			chip->is_open ? "open" : "closed",
+			chip_name[chip->chip_type],
+			chip->vend_dev >> 16);
+}
+
+static int tpm_tis_i2c_probe(struct udevice *dev)
+{
+	struct tpm_chip_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct tpm_chip *chip = dev_get_priv(dev);
+
+	chip->chip_type = dev_get_driver_data(dev);
+
+	/* TODO: These need to be checked and tuned */
+	uc_priv->duration_ms[TPM_SHORT] = TIS_SHORT_TIMEOUT_MS;
+	uc_priv->duration_ms[TPM_MEDIUM] = TIS_LONG_TIMEOUT_MS;
+	uc_priv->duration_ms[TPM_LONG] = TIS_LONG_TIMEOUT_MS;
+	uc_priv->retry_time_ms = TPM_TIMEOUT_MS;
+
+	return 0;
+}
+
+static const struct tpm_ops tpm_tis_i2c_ops = {
+	.open		= tpm_tis_i2c_open,
+	.close		= tpm_tis_i2c_close,
+	.get_desc	= tpm_tis_get_desc,
+	.send		= tpm_tis_i2c_send,
+	.recv		= tpm_tis_i2c_recv,
+	.cleanup	= tpm_tis_i2c_cleanup,
+};
+
+static const struct udevice_id tpm_tis_i2c_ids[] = {
+	{ .compatible = "infineon,slb9635tt", .data = SLB9635 },
+	{ .compatible = "infineon,slb9645tt", .data = SLB9645 },
+	{ }
+};
+
+U_BOOT_DRIVER(tpm_tis_i2c) = {
+	.name   = "tpm_tis_infineon",
+	.id     = UCLASS_TPM,
+	.of_match = tpm_tis_i2c_ids,
+	.ops    = &tpm_tis_i2c_ops,
+	.probe	= tpm_tis_i2c_probe,
+	.priv_auto_alloc_size = sizeof(struct tpm_chip),
+};