ufs: Add Initial Support for UFS subsystem

Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:

- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests

Also register this host controller as a SCSI host controller.

Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

1 files changed, 918 insertions, 0 deletions

diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h
new file mode 100644
index 0000000000..e0bde93776
--- /dev/null
+++ b/drivers/ufs/ufs.h
@@ -0,0 +1,918 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef __UFS_H
+#define __UFS_H
+
+#include <asm/io.h>
+#include <dm.h>
+
+#include "unipro.h"
+
+#define UFS_CDB_SIZE	16
+#define UPIU_TRANSACTION_UIC_CMD 0x1F
+#define UIC_CMD_SIZE (sizeof(u32) * 4)
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH	18
+#define UFS_MAX_LUNS		0x7F
+
+enum {
+	TASK_REQ_UPIU_SIZE_DWORDS	= 8,
+	TASK_RSP_UPIU_SIZE_DWORDS	= 8,
+	ALIGNED_UPIU_SIZE		= 512,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+	UFS_ACTIVE_PWR_MODE	= 1,
+	UFS_SLEEP_PWR_MODE	= 2,
+	UFS_POWERDOWN_PWR_MODE	= 3,
+};
+
+enum ufs_notify_change_status {
+	PRE_CHANGE,
+	POST_CHANGE,
+};
+
+struct ufs_pa_layer_attr {
+	u32 gear_rx;
+	u32 gear_tx;
+	u32 lane_rx;
+	u32 lane_tx;
+	u32 pwr_rx;
+	u32 pwr_tx;
+	u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+	bool is_valid;
+	struct ufs_pa_layer_attr info;
+};
+
+enum ufs_desc_def_size {
+	QUERY_DESC_DEVICE_DEF_SIZE		= 0x40,
+	QUERY_DESC_CONFIGURATION_DEF_SIZE	= 0x90,
+	QUERY_DESC_UNIT_DEF_SIZE		= 0x23,
+	QUERY_DESC_INTERCONNECT_DEF_SIZE	= 0x06,
+	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x48,
+	QUERY_DESC_POWER_DEF_SIZE		= 0x62,
+	QUERY_DESC_HEALTH_DEF_SIZE		= 0x25,
+};
+
+struct ufs_desc_size {
+	int dev_desc;
+	int pwr_desc;
+	int geom_desc;
+	int interc_desc;
+	int unit_desc;
+	int conf_desc;
+	int hlth_desc;
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+	UTP_CMD_TYPE_SCSI		= 0x0,
+	UTP_CMD_TYPE_UFS		= 0x1,
+	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET	28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET		8
+
+/* To accommodate UFS2.0 required Command type */
+enum {
+	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,
+};
+
+enum {
+	UTP_SCSI_COMMAND		= 0x00000000,
+	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
+	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
+	UTP_REQ_DESC_INT_CMD		= 0x01000000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+	UTP_NO_DATA_TRANSFER	= 0x00000000,
+	UTP_HOST_TO_DEVICE	= 0x02000000,
+	UTP_DEVICE_TO_HOST	= 0x04000000,
+};
+
+/* Overall command status values */
+enum {
+	OCS_SUCCESS			= 0x0,
+	OCS_INVALID_CMD_TABLE_ATTR	= 0x1,
+	OCS_INVALID_PRDT_ATTR		= 0x2,
+	OCS_MISMATCH_DATA_BUF_SIZE	= 0x3,
+	OCS_MISMATCH_RESP_UPIU_SIZE	= 0x4,
+	OCS_PEER_COMM_FAILURE		= 0x5,
+	OCS_ABORTED			= 0x6,
+	OCS_FATAL_ERROR			= 0x7,
+	OCS_INVALID_COMMAND_STATUS	= 0x0F,
+	MASK_OCS			= 0x0F,
+};
+
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX	(256 * 1024)
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD	4
+
+#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
+#define QUERY_DESC_MAX_SIZE       255
+#define QUERY_DESC_MIN_SIZE       2
+#define QUERY_DESC_HDR_SIZE       2
+#define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
+					(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH	18
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+			 (byte1 << 8) | (byte0))
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+	UFS_ABORT_TASK		= 0x01,
+	UFS_ABORT_TASK_SET	= 0x02,
+	UFS_CLEAR_TASK_SET	= 0x04,
+	UFS_LOGICAL_RESET	= 0x08,
+	UFS_QUERY_TASK		= 0x80,
+	UFS_QUERY_TASK_SET	= 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+	UPIU_TRANSACTION_NOP_OUT	= 0x00,
+	UPIU_TRANSACTION_COMMAND	= 0x01,
+	UPIU_TRANSACTION_DATA_OUT	= 0x02,
+	UPIU_TRANSACTION_TASK_REQ	= 0x04,
+	UPIU_TRANSACTION_QUERY_REQ	= 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+	UPIU_TRANSACTION_NOP_IN		= 0x20,
+	UPIU_TRANSACTION_RESPONSE	= 0x21,
+	UPIU_TRANSACTION_DATA_IN	= 0x22,
+	UPIU_TRANSACTION_TASK_RSP	= 0x24,
+	UPIU_TRANSACTION_READY_XFER	= 0x31,
+	UPIU_TRANSACTION_QUERY_RSP	= 0x36,
+	UPIU_TRANSACTION_REJECT_UPIU	= 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+	UPIU_CMD_FLAGS_NONE	= 0x00,
+	UPIU_CMD_FLAGS_WRITE	= 0x20,
+	UPIU_CMD_FLAGS_READ	= 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+	UPIU_TASK_ATTR_SIMPLE	= 0x00,
+	UPIU_TASK_ATTR_ORDERED	= 0x01,
+	UPIU_TASK_ATTR_HEADQ	= 0x02,
+	UPIU_TASK_ATTR_ACA	= 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+	UPIU_QUERY_FUNC_STANDARD_READ_REQUEST           = 0x01,
+	UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST          = 0x81,
+};
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET		8
+
+enum {
+	MASK_SCSI_STATUS		= 0xFF,
+	MASK_TASK_RESPONSE              = 0xFF00,
+	MASK_RSP_UPIU_RESULT            = 0xFFFF,
+	MASK_QUERY_DATA_SEG_LEN         = 0xFFFF,
+	MASK_RSP_UPIU_DATA_SEG_LEN	= 0xFFFF,
+	MASK_RSP_EXCEPTION_EVENT        = 0x10000,
+	MASK_TM_SERVICE_RESP		= 0xFF,
+	MASK_TM_FUNC			= 0xFF,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
+	UPIU_QUERY_OPCODE_NOP		= 0x0,
+	UPIU_QUERY_OPCODE_READ_DESC	= 0x1,
+	UPIU_QUERY_OPCODE_WRITE_DESC	= 0x2,
+	UPIU_QUERY_OPCODE_READ_ATTR	= 0x3,
+	UPIU_QUERY_OPCODE_WRITE_ATTR	= 0x4,
+	UPIU_QUERY_OPCODE_READ_FLAG	= 0x5,
+	UPIU_QUERY_OPCODE_SET_FLAG	= 0x6,
+	UPIU_QUERY_OPCODE_CLEAR_FLAG	= 0x7,
+	UPIU_QUERY_OPCODE_TOGGLE_FLAG	= 0x8,
+};
+
+/* Query response result code */
+enum {
+	QUERY_RESULT_SUCCESS                    = 0x00,
+	QUERY_RESULT_NOT_READABLE               = 0xF6,
+	QUERY_RESULT_NOT_WRITEABLE              = 0xF7,
+	QUERY_RESULT_ALREADY_WRITTEN            = 0xF8,
+	QUERY_RESULT_INVALID_LENGTH             = 0xF9,
+	QUERY_RESULT_INVALID_VALUE              = 0xFA,
+	QUERY_RESULT_INVALID_SELECTOR           = 0xFB,
+	QUERY_RESULT_INVALID_INDEX              = 0xFC,
+	QUERY_RESULT_INVALID_IDN                = 0xFD,
+	QUERY_RESULT_INVALID_OPCODE             = 0xFE,
+	QUERY_RESULT_GENERAL_FAILURE            = 0xFF,
+};
+
+enum {
+	UPIU_COMMAND_SET_TYPE_SCSI	= 0x0,
+	UPIU_COMMAND_SET_TYPE_UFS	= 0x1,
+	UPIU_COMMAND_SET_TYPE_QUERY	= 0x2,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+	QUERY_FLAG_IDN_FDEVICEINIT			= 0x01,
+	QUERY_FLAG_IDN_PERMANENT_WPE			= 0x02,
+	QUERY_FLAG_IDN_PWR_ON_WPE			= 0x03,
+	QUERY_FLAG_IDN_BKOPS_EN				= 0x04,
+	QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE		= 0x05,
+	QUERY_FLAG_IDN_PURGE_ENABLE			= 0x06,
+	QUERY_FLAG_IDN_RESERVED2			= 0x07,
+	QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL		= 0x08,
+	QUERY_FLAG_IDN_BUSY_RTC				= 0x09,
+	QUERY_FLAG_IDN_RESERVED3			= 0x0A,
+	QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE	= 0x0B,
+};
+
+/* Attribute idn for Query requests */
+enum attr_idn {
+	QUERY_ATTR_IDN_BOOT_LU_EN		= 0x00,
+	QUERY_ATTR_IDN_RESERVED			= 0x01,
+	QUERY_ATTR_IDN_POWER_MODE		= 0x02,
+	QUERY_ATTR_IDN_ACTIVE_ICC_LVL		= 0x03,
+	QUERY_ATTR_IDN_OOO_DATA_EN		= 0x04,
+	QUERY_ATTR_IDN_BKOPS_STATUS		= 0x05,
+	QUERY_ATTR_IDN_PURGE_STATUS		= 0x06,
+	QUERY_ATTR_IDN_MAX_DATA_IN		= 0x07,
+	QUERY_ATTR_IDN_MAX_DATA_OUT		= 0x08,
+	QUERY_ATTR_IDN_DYN_CAP_NEEDED		= 0x09,
+	QUERY_ATTR_IDN_REF_CLK_FREQ		= 0x0A,
+	QUERY_ATTR_IDN_CONF_DESC_LOCK		= 0x0B,
+	QUERY_ATTR_IDN_MAX_NUM_OF_RTT		= 0x0C,
+	QUERY_ATTR_IDN_EE_CONTROL		= 0x0D,
+	QUERY_ATTR_IDN_EE_STATUS		= 0x0E,
+	QUERY_ATTR_IDN_SECONDS_PASSED		= 0x0F,
+	QUERY_ATTR_IDN_CNTX_CONF		= 0x10,
+	QUERY_ATTR_IDN_CORR_PRG_BLK_NUM		= 0x11,
+	QUERY_ATTR_IDN_RESERVED2		= 0x12,
+	QUERY_ATTR_IDN_RESERVED3		= 0x13,
+	QUERY_ATTR_IDN_FFU_STATUS		= 0x14,
+	QUERY_ATTR_IDN_PSA_STATE		= 0x15,
+	QUERY_ATTR_IDN_PSA_DATA_SIZE		= 0x16,
+};
+
+/* Descriptor idn for Query requests */
+enum desc_idn {
+	QUERY_DESC_IDN_DEVICE		= 0x0,
+	QUERY_DESC_IDN_CONFIGURATION	= 0x1,
+	QUERY_DESC_IDN_UNIT		= 0x2,
+	QUERY_DESC_IDN_RFU_0		= 0x3,
+	QUERY_DESC_IDN_INTERCONNECT	= 0x4,
+	QUERY_DESC_IDN_STRING		= 0x5,
+	QUERY_DESC_IDN_RFU_1		= 0x6,
+	QUERY_DESC_IDN_GEOMETRY		= 0x7,
+	QUERY_DESC_IDN_POWER		= 0x8,
+	QUERY_DESC_IDN_HEALTH           = 0x9,
+	QUERY_DESC_IDN_MAX,
+};
+
+enum desc_header_offset {
+	QUERY_DESC_LENGTH_OFFSET	= 0x00,
+	QUERY_DESC_DESC_TYPE_OFFSET	= 0x01,
+};
+
+struct ufshcd_sg_entry {
+	__le32    base_addr;
+	__le32    upper_addr;
+	__le32    reserved;
+	__le32    size;
+};
+
+#define MAX_BUFF	128
+/**
+ * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+	u8 command_upiu[ALIGNED_UPIU_SIZE];
+	u8 response_upiu[ALIGNED_UPIU_SIZE];
+	struct ufshcd_sg_entry    prd_table[MAX_BUFF];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+	__le32 dword_0;
+	__le32 dword_1;
+	__le32 dword_2;
+	__le32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTRD structure
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+	/* DW 0-3 */
+	struct request_desc_header header;
+
+	/* DW 4-5*/
+	__le32  command_desc_base_addr_lo;
+	__le32  command_desc_base_addr_hi;
+
+	/* DW 6 */
+	__le16  response_upiu_length;
+	__le16  response_upiu_offset;
+
+	/* DW 7 */
+	__le16  prd_table_length;
+	__le16  prd_table_offset;
+};
+
+/**
+ * struct utp_upiu_header - UPIU header structure
+ * @dword_0: UPIU header DW-0
+ * @dword_1: UPIU header DW-1
+ * @dword_2: UPIU header DW-2
+ */
+struct utp_upiu_header {
+	__be32 dword_0;
+	__be32 dword_1;
+	__be32 dword_2;
+};
+
+/**
+ * struct utp_upiu_query - upiu request buffer structure for
+ * query request.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @reserved_osf: spec reserved field B-4,5
+ * @length: number of descriptor bytes to read/write B-6,7
+ * @value: Attribute value to be written DW-5
+ * @reserved: spec reserved DW-6,7
+ */
+struct utp_upiu_query {
+	__u8 opcode;
+	__u8 idn;
+	__u8 index;
+	__u8 selector;
+	__be16 reserved_osf;
+	__be16 length;
+	__be32 value;
+	__be32 reserved[2];
+};
+
+/**
+ * struct utp_upiu_cmd - Command UPIU structure
+ * @data_transfer_len: Data Transfer Length DW-3
+ * @cdb: Command Descriptor Block CDB DW-4 to DW-7
+ */
+struct utp_upiu_cmd {
+	__be32 exp_data_transfer_len;
+	u8 cdb[UFS_CDB_SIZE];
+};
+
+/*
+ * UTMRD structure.
+ */
+struct utp_task_req_desc {
+	/* DW 0-3 */
+	struct request_desc_header header;
+
+	/* DW 4-11 - Task request UPIU structure */
+	struct utp_upiu_header	req_header;
+	__be32			input_param1;
+	__be32			input_param2;
+	__be32			input_param3;
+	__be32			__reserved1[2];
+
+	/* DW 12-19 - Task Management Response UPIU structure */
+	struct utp_upiu_header	rsp_header;
+	__be32			output_param1;
+	__be32			output_param2;
+	__be32			__reserved2[3];
+};
+
+/**
+ * struct utp_upiu_req - general upiu request structure
+ * @header:UPIU header structure DW-0 to DW-2
+ * @sc: fields structure for scsi command DW-3 to DW-7
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_req {
+	struct utp_upiu_header header;
+	union {
+		struct utp_upiu_cmd		sc;
+		struct utp_upiu_query		qr;
+		struct utp_upiu_query		tr;
+		/* use utp_upiu_query to host the 4 dwords of uic command */
+		struct utp_upiu_query		uc;
+	};
+};
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+	__be32 residual_transfer_count;
+	__be32 reserved[4];
+	__be16 sense_data_len;
+	u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
+};
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+	struct utp_upiu_header header;
+	union {
+		struct utp_cmd_rsp sr;
+		struct utp_upiu_query qr;
+	};
+};
+
+#define MAX_MODEL_LEN 16
+/**
+ * ufs_dev_desc - ufs device details from the device descriptor
+ *
+ * @wmanufacturerid: card details
+ * @model: card model
+ */
+struct ufs_dev_desc {
+	u16 wmanufacturerid;
+	char model[MAX_MODEL_LEN + 1];
+};
+
+/* Device descriptor parameters offsets in bytes*/
+enum device_desc_param {
+	DEVICE_DESC_PARAM_LEN			= 0x0,
+	DEVICE_DESC_PARAM_TYPE			= 0x1,
+	DEVICE_DESC_PARAM_DEVICE_TYPE		= 0x2,
+	DEVICE_DESC_PARAM_DEVICE_CLASS		= 0x3,
+	DEVICE_DESC_PARAM_DEVICE_SUB_CLASS	= 0x4,
+	DEVICE_DESC_PARAM_PRTCL			= 0x5,
+	DEVICE_DESC_PARAM_NUM_LU		= 0x6,
+	DEVICE_DESC_PARAM_NUM_WLU		= 0x7,
+	DEVICE_DESC_PARAM_BOOT_ENBL		= 0x8,
+	DEVICE_DESC_PARAM_DESC_ACCSS_ENBL	= 0x9,
+	DEVICE_DESC_PARAM_INIT_PWR_MODE		= 0xA,
+	DEVICE_DESC_PARAM_HIGH_PR_LUN		= 0xB,
+	DEVICE_DESC_PARAM_SEC_RMV_TYPE		= 0xC,
+	DEVICE_DESC_PARAM_SEC_LU		= 0xD,
+	DEVICE_DESC_PARAM_BKOP_TERM_LT		= 0xE,
+	DEVICE_DESC_PARAM_ACTVE_ICC_LVL		= 0xF,
+	DEVICE_DESC_PARAM_SPEC_VER		= 0x10,
+	DEVICE_DESC_PARAM_MANF_DATE		= 0x12,
+	DEVICE_DESC_PARAM_MANF_NAME		= 0x14,
+	DEVICE_DESC_PARAM_PRDCT_NAME		= 0x15,
+	DEVICE_DESC_PARAM_SN			= 0x16,
+	DEVICE_DESC_PARAM_OEM_ID		= 0x17,
+	DEVICE_DESC_PARAM_MANF_ID		= 0x18,
+	DEVICE_DESC_PARAM_UD_OFFSET		= 0x1A,
+	DEVICE_DESC_PARAM_UD_LEN		= 0x1B,
+	DEVICE_DESC_PARAM_RTT_CAP		= 0x1C,
+	DEVICE_DESC_PARAM_FRQ_RTC		= 0x1D,
+	DEVICE_DESC_PARAM_UFS_FEAT		= 0x1F,
+	DEVICE_DESC_PARAM_FFU_TMT		= 0x20,
+	DEVICE_DESC_PARAM_Q_DPTH		= 0x21,
+	DEVICE_DESC_PARAM_DEV_VER		= 0x22,
+	DEVICE_DESC_PARAM_NUM_SEC_WPA		= 0x24,
+	DEVICE_DESC_PARAM_PSA_MAX_DATA		= 0x25,
+	DEVICE_DESC_PARAM_PSA_TMT		= 0x29,
+	DEVICE_DESC_PARAM_PRDCT_REV		= 0x2A,
+};
+
+struct ufs_hba;
+
+enum {
+	UFSHCD_MAX_CHANNEL	= 0,
+	UFSHCD_MAX_ID		= 1,
+};
+
+enum dev_cmd_type {
+	DEV_CMD_TYPE_NOP		= 0x0,
+	DEV_CMD_TYPE_QUERY		= 0x1,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ * @done: UIC command completion
+ */
+struct uic_command {
+	u32 command;
+	u32 argument1;
+	u32 argument2;
+	u32 argument3;
+	int cmd_active;
+	int result;
+};
+
+/* GenSelectorIndex calculation macros for M-PHY attributes */
+#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
+#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
+
+#define UIC_ARG_MIB_SEL(attr, sel)	((((attr) & 0xFFFF) << 16) |\
+					 ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr)		UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)
+
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};
+
+#define UIC_ARG_MIB_SEL(attr, sel)	((((attr) & 0xFFFF) << 16) |\
+					 ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr)		UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)
+
+/* UIC Commands */
+enum uic_cmd_dme {
+	UIC_CMD_DME_GET			= 0x01,
+	UIC_CMD_DME_SET			= 0x02,
+	UIC_CMD_DME_PEER_GET		= 0x03,
+	UIC_CMD_DME_PEER_SET		= 0x04,
+	UIC_CMD_DME_POWERON		= 0x10,
+	UIC_CMD_DME_POWEROFF		= 0x11,
+	UIC_CMD_DME_ENABLE		= 0x12,
+	UIC_CMD_DME_RESET		= 0x14,
+	UIC_CMD_DME_END_PT_RST		= 0x15,
+	UIC_CMD_DME_LINK_STARTUP	= 0x16,
+	UIC_CMD_DME_HIBER_ENTER		= 0x17,
+	UIC_CMD_DME_HIBER_EXIT		= 0x18,
+	UIC_CMD_DME_TEST_MODE		= 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+	UIC_CMD_RESULT_SUCCESS			= 0x00,
+	UIC_CMD_RESULT_INVALID_ATTR		= 0x01,
+	UIC_CMD_RESULT_FAILURE			= 0x01,
+	UIC_CMD_RESULT_INVALID_ATTR_VALUE	= 0x02,
+	UIC_CMD_RESULT_READ_ONLY_ATTR		= 0x03,
+	UIC_CMD_RESULT_WRITE_ONLY_ATTR		= 0x04,
+	UIC_CMD_RESULT_BAD_INDEX		= 0x05,
+	UIC_CMD_RESULT_LOCKED_ATTR		= 0x06,
+	UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX	= 0x07,
+	UIC_CMD_RESULT_PEER_COMM_FAILURE	= 0x08,
+	UIC_CMD_RESULT_BUSY			= 0x09,
+	UIC_CMD_RESULT_DME_FAILURE		= 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT			0xFF
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
+	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
+	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
+};
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL	0
+#define DME_PEER	1
+#define ATTR_SET_NOR	0	/* NORMAL */
+#define ATTR_SET_ST	1	/* STATIC */
+
+int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+			u8 attr_set, u32 mib_val, u8 peer);
+int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+			u32 *mib_val, u8 peer);
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+				 u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+				 u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+				      u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+				      u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_PEER);
+}
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+	u8 query_func;
+	struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+	u8 response;
+	struct utp_upiu_query upiu_res;
+};
+
+/**
+ * struct ufs_query - holds relevant data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+	struct ufs_query_req request;
+	u8 *descriptor;
+	struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @tag_wq: wait queue until free command slot is available
+ */
+struct ufs_dev_cmd {
+	enum dev_cmd_type type;
+	struct ufs_query query;
+};
+
+struct ufs_hba_ops {
+	int (*init)(struct ufs_hba *hba);
+	int (*hce_enable_notify)(struct ufs_hba *hba,
+				 enum ufs_notify_change_status);
+	int (*link_startup_notify)(struct ufs_hba *hba,
+				   enum ufs_notify_change_status);
+	int (*phy_initialization)(struct ufs_hba *hba);
+};
+
+struct ufs_hba {
+	struct			udevice *dev;
+	void __iomem		*mmio_base;
+	struct ufs_hba_ops	*ops;
+	struct ufs_desc_size	desc_size;
+	u32			capabilities;
+	u32			version;
+	u32			intr_mask;
+	u32			quirks;
+/*
+ * If UFS host controller is having issue in processing LCC (Line
+ * Control Command) coming from device then enable this quirk.
+ * When this quirk is enabled, host controller driver should disable
+ * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+ * attribute of device to 0).
+ */
+#define UFSHCD_QUIRK_BROKEN_LCC				0x1
+
+	/* Virtual memory reference */
+	struct utp_transfer_cmd_desc *ucdl;
+	struct utp_transfer_req_desc *utrdl;
+	/* TODO: Add Task Manegement Support */
+	struct utp_task_req_desc *utmrdl;
+
+	struct utp_upiu_req *ucd_req_ptr;
+	struct utp_upiu_rsp *ucd_rsp_ptr;
+	struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+	/* Power Mode information */
+	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+	struct ufs_pa_layer_attr pwr_info;
+	struct ufs_pwr_mode_info max_pwr_info;
+
+	struct ufs_dev_cmd dev_cmd;
+};
+
+static inline int ufshcd_ops_init(struct ufs_hba *hba)
+{
+	if (hba->ops && hba->ops->init)
+		return hba->ops->init(hba);
+
+	return 0;
+}
+
+static inline int ufshcd_ops_hce_enable_notify(struct ufs_hba *hba,
+						bool status)
+{
+	if (hba->ops && hba->ops->hce_enable_notify)
+		return hba->ops->hce_enable_notify(hba, status);
+
+	return 0;
+}
+
+static inline int ufshcd_ops_link_startup_notify(struct ufs_hba *hba,
+						 bool status)
+{
+	if (hba->ops && hba->ops->link_startup_notify)
+		return hba->ops->link_startup_notify(hba, status);
+
+	return 0;
+}
+
+/* Controller UFSHCI version */
+enum {
+	UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
+	UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
+	UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
+	UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
+};
+
+/* Interrupt disable masks */
+enum {
+	/* Interrupt disable mask for UFSHCI v1.0 */
+	INTERRUPT_MASK_ALL_VER_10	= 0x30FFF,
+	INTERRUPT_MASK_RW_VER_10	= 0x30000,
+
+	/* Interrupt disable mask for UFSHCI v1.1 */
+	INTERRUPT_MASK_ALL_VER_11	= 0x31FFF,
+
+	/* Interrupt disable mask for UFSHCI v2.1 */
+	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
+};
+
+/* UFSHCI Registers */
+enum {
+	REG_CONTROLLER_CAPABILITIES		= 0x00,
+	REG_UFS_VERSION				= 0x08,
+	REG_CONTROLLER_DEV_ID			= 0x10,
+	REG_CONTROLLER_PROD_ID			= 0x14,
+	REG_AUTO_HIBERNATE_IDLE_TIMER		= 0x18,
+	REG_INTERRUPT_STATUS			= 0x20,
+	REG_INTERRUPT_ENABLE			= 0x24,
+	REG_CONTROLLER_STATUS			= 0x30,
+	REG_CONTROLLER_ENABLE			= 0x34,
+	REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER	= 0x38,
+	REG_UIC_ERROR_CODE_DATA_LINK_LAYER	= 0x3C,
+	REG_UIC_ERROR_CODE_NETWORK_LAYER	= 0x40,
+	REG_UIC_ERROR_CODE_TRANSPORT_LAYER	= 0x44,
+	REG_UIC_ERROR_CODE_DME			= 0x48,
+	REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL	= 0x4C,
+	REG_UTP_TRANSFER_REQ_LIST_BASE_L	= 0x50,
+	REG_UTP_TRANSFER_REQ_LIST_BASE_H	= 0x54,
+	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
+	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
+	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
+	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
+	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
+	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
+	REG_UTP_TASK_REQ_LIST_CLEAR		= 0x7C,
+	REG_UTP_TASK_REQ_LIST_RUN_STOP		= 0x80,
+	REG_UIC_COMMAND				= 0x90,
+	REG_UIC_COMMAND_ARG_1			= 0x94,
+	REG_UIC_COMMAND_ARG_2			= 0x98,
+	REG_UIC_COMMAND_ARG_3			= 0x9C,
+
+	UFSHCI_REG_SPACE_SIZE			= 0xA0,
+
+	REG_UFS_CCAP				= 0x100,
+	REG_UFS_CRYPTOCAP			= 0x104,
+
+	UFSHCI_CRYPTO_REG_SPACE_SIZE		= 0x400,
+};
+
+/* Controller capability masks */
+enum {
+	MASK_TRANSFER_REQUESTS_SLOTS		= 0x0000001F,
+	MASK_TASK_MANAGEMENT_REQUEST_SLOTS	= 0x00070000,
+	MASK_AUTO_HIBERN8_SUPPORT		= 0x00800000,
+	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
+	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
+	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
+};
+
+/* Interrupt Status 20h */
+#define UTP_TRANSFER_REQ_COMPL			0x1
+#define UIC_DME_END_PT_RESET			0x2
+#define UIC_ERROR				0x4
+#define UIC_TEST_MODE				0x8
+#define UIC_POWER_MODE				0x10
+#define UIC_HIBERNATE_EXIT			0x20
+#define UIC_HIBERNATE_ENTER			0x40
+#define UIC_LINK_LOST				0x80
+#define UIC_LINK_STARTUP			0x100
+#define UTP_TASK_REQ_COMPL			0x200
+#define UIC_COMMAND_COMPL			0x400
+#define DEVICE_FATAL_ERROR			0x800
+#define CONTROLLER_FATAL_ERROR			0x10000
+#define SYSTEM_BUS_FATAL_ERROR			0x20000
+
+#define UFSHCD_UIC_PWR_MASK	(UIC_HIBERNATE_ENTER |\
+				UIC_HIBERNATE_EXIT |\
+				UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK		(UIC_COMMAND_COMPL | UIC_POWER_MODE)
+
+#define UFSHCD_ERROR_MASK	(UIC_ERROR |\
+				DEVICE_FATAL_ERROR |\
+				CONTROLLER_FATAL_ERROR |\
+				SYSTEM_BUS_FATAL_ERROR)
+
+#define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
+				CONTROLLER_FATAL_ERROR |\
+				SYSTEM_BUS_FATAL_ERROR)
+
+/* Host Controller Enable 0x34h */
+#define CONTROLLER_ENABLE	0x1
+#define CONTROLLER_DISABLE	0x0
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT				0x1
+#define UTP_TRANSFER_REQ_LIST_READY		0x2
+#define UTP_TASK_REQ_LIST_READY			0x4
+#define UIC_COMMAND_READY			0x8
+#define HOST_ERROR_INDICATOR			0x10
+#define DEVICE_ERROR_INDICATOR			0x20
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)
+
+#define UFSHCD_STATUS_READY	(UTP_TRANSFER_REQ_LIST_READY |\
+				UTP_TASK_REQ_LIST_READY |\
+				UIC_COMMAND_READY)
+
+enum {
+	PWR_OK		= 0x0,
+	PWR_LOCAL	= 0x01,
+	PWR_REMOTE	= 0x02,
+	PWR_BUSY	= 0x03,
+	PWR_ERROR_CAP	= 0x04,
+	PWR_FATAL_ERROR	= 0x05,
+};
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK		0xFF
+#define GEN_SELECTOR_INDEX_MASK		0xFFFF
+
+#define MIB_ATTRIBUTE_MASK		UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL			0xFF
+
+#define ATTR_SET_TYPE_MASK		UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK		0xFF
+#define GENERIC_ERROR_CODE_MASK		0xFF
+
+#define ufshcd_writel(hba, val, reg)   \
+	writel((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg) \
+	readl((hba)->mmio_base + (reg))
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	0x1
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1
+
+int ufshcd_probe(struct udevice *dev, struct ufs_hba_ops *hba_ops);
+
+#endif