diff options
| author | Marek Szyprowski <m.szyprowski@samsung.com> | 2019-12-02 12:11:17 +0100 |
|---|---|---|
| committer | Matthias Brugger <mbrugger@suse.com> | 2020-01-29 18:30:33 +0100 |
| commit | c4d08cb9b157e391bd1015871ea0950159aaf88e (patch) | |
| tree | 049ef3a9d3ab03037690714bf533a8c220cb6f41 /drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | |
| parent | c2a1e3dbf83f150f6d87cad243255d3f84ceca72 (diff) | |
usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support
Broadcom 2835 SoC requires special conversion of physical memory addresses
for DMA purpose, so add needed wrappers to dwc2_udc_otg driver. Also extend
the list of compatible devices with 'brcm,bcm2835-usb' entry. This allows
to use USB gadget drivers (i.e. DFU) on Raspberry Pi4 boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Diffstat (limited to 'drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c')
| -rw-r--r-- | drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index b68c2b2686..d4fbb75cc9 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c @@ -31,7 +31,7 @@ static inline void dwc2_udc_ep0_zlp(struct dwc2_udc *dev) { u32 ep_ctrl; - writel(usb_ctrl_dma_addr, ®->in_endp[EP0_CON].diepdma); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->in_endp[EP0_CON].diepdma); writel(DIEPT_SIZ_PKT_CNT(1), ®->in_endp[EP0_CON].dieptsiz); ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); @@ -52,7 +52,7 @@ static void dwc2_udc_pre_setup(void) writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), ®->out_endp[EP0_CON].doeptsiz); - writel(usb_ctrl_dma_addr, ®->out_endp[EP0_CON].doepdma); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->out_endp[EP0_CON].doepdma); ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); writel(ep_ctrl|DEPCTL_EPENA, ®->out_endp[EP0_CON].doepctl); @@ -78,7 +78,7 @@ static inline void dwc2_ep0_complete_out(void) writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), ®->out_endp[EP0_CON].doeptsiz); - writel(usb_ctrl_dma_addr, ®->out_endp[EP0_CON].doepdma); + writel(phys_to_bus((unsigned long)usb_ctrl_dma_addr), ®->out_endp[EP0_CON].doepdma); ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, @@ -116,7 +116,7 @@ static int setdma_rx(struct dwc2_ep *ep, struct dwc2_request *req) (unsigned long) ep->dma_buf + ROUND(ep->len, CONFIG_SYS_CACHELINE_SIZE)); - writel((unsigned long) ep->dma_buf, ®->out_endp[ep_num].doepdma); + writel(phys_to_bus((unsigned long)ep->dma_buf), ®->out_endp[ep_num].doepdma); writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length), ®->out_endp[ep_num].doeptsiz); writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->out_endp[ep_num].doepctl); @@ -164,7 +164,7 @@ static int setdma_tx(struct dwc2_ep *ep, struct dwc2_request *req) while (readl(®->grstctl) & TX_FIFO_FLUSH) ; - writel((unsigned long) ep->dma_buf, ®->in_endp[ep_num].diepdma); + writel(phys_to_bus((unsigned long)ep->dma_buf), ®->in_endp[ep_num].diepdma); writel(DIEPT_SIZ_PKT_CNT(pktcnt) | DIEPT_SIZ_XFER_SIZE(length), ®->in_endp[ep_num].dieptsiz); @@ -924,7 +924,7 @@ static int dwc2_udc_get_status(struct dwc2_udc *dev, (unsigned long) usb_ctrl + ROUND(sizeof(g_status), CONFIG_SYS_CACHELINE_SIZE)); - writel(usb_ctrl_dma_addr, ®->in_endp[EP0_CON].diepdma); + writel(phys_to_bus(usb_ctrl_dma_addr), ®->in_endp[EP0_CON].diepdma); writel(DIEPT_SIZ_PKT_CNT(1) | DIEPT_SIZ_XFER_SIZE(2), ®->in_endp[EP0_CON].dieptsiz); |