diff options
author | Mike Dunn <mikedunn@newsguy.com> | 2013-04-12 11:59:15 -0700 |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2013-05-05 23:47:05 +0200 |
commit | e0e89e236f9692eb0af034c59607e2db2e333c1d (patch) | |
tree | dab4925c8d6bb5b85a8bbcf02ea16aaea9453856 /drivers/usb/gadget/pxa27x_udc.c | |
parent | 86e929e8252c9b2a6e74a9d53c9ef8a9d5353602 (diff) |
pxa27x_udc: remove call to unimplemented set_GPIO_mode()
If CONFIG_USB_DEV_PULLUP_GPIO is defined, a link error occurs because the
set_GPIO_mode() helper function is not implemented. This function doesn't do
much except make the code a little more readable, so I just manually coded its
equivalent and removed the prototype from the header file. It is invoked no
where else in the code.
While I was at it, I noticed that two other function prototypes in the same
header file are also neither implemented nor invoked anywhere, so I removed them
as well.
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Diffstat (limited to 'drivers/usb/gadget/pxa27x_udc.c')
-rw-r--r-- | drivers/usb/gadget/pxa27x_udc.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 4c00081743..71cc0f2a05 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -610,7 +610,9 @@ void udc_connect(void) #ifdef CONFIG_USB_DEV_PULLUP_GPIO /* Turn on the USB connection by enabling the pullup resistor */ - set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT); + writel(readl(GPDR(CONFIG_USB_DEV_PULLUP_GPIO)) + | GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), + GPDR(CONFIG_USB_DEV_PULLUP_GPIO)); writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPSR(CONFIG_USB_DEV_PULLUP_GPIO)); #else /* Host port 2 transceiver D+ pull up enable */ |