diff options
| author | Julius Werner <jwerner@chromium.org> | 2013-09-14 14:02:52 +0530 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2013-10-20 23:42:38 +0200 |
| commit | 4a271cb1b4ffdf33073c0dc8ee1e185c037275f4 (patch) | |
| tree | 9e4cb7ba9e1464c094e65236b0a0e2920d89417e /drivers/usb/host/ehci-exynos.c | |
| parent | 8f999f0cbcd4802095d7f812871661a3e7f479d7 (diff) | |
exynos: usb: Switch USB VBUS GPIOs to be device tree configured
Some Exynos boards, such as the SMDK5250, control USB port power through
a GPIO pin. For now this had been hardcoded in the exynos5-dt board
file, but not all boards use the same pin, requiring local changes to
support different boards.
This patch moves the GPIO initialization into the USB host controller
drivers which they belong to, and uses the samsung,vbus-gpio parameter
in the device tree to configure it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Diffstat (limited to 'drivers/usb/host/ehci-exynos.c')
| -rw-r--r-- | drivers/usb/host/ehci-exynos.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 155677e0d9..15926c4336 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -16,6 +16,7 @@ #include <asm/arch/ehci.h> #include <asm/arch/system.h> #include <asm/arch/power.h> +#include <asm/gpio.h> #include <asm-generic/errno.h> #include <linux/compat.h> #include "ehci.h" @@ -30,6 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; struct exynos_ehci { struct exynos_usb_phy *usb; struct ehci_hccr *hcd; + struct fdt_gpio_state vbus_gpio; }; static struct exynos_ehci exynos; @@ -58,6 +60,9 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) exynos->hcd = (struct ehci_hccr *)addr; + /* Vbus gpio */ + fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio); + depth = 0; node = fdtdec_next_compatible_subnode(blob, node, COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth); @@ -150,6 +155,12 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci(); #endif +#ifdef CONFIG_OF_CONTROL + /* setup the Vbus gpio here */ + if (!fdtdec_setup_gpio(&ctx->vbus_gpio)) + gpio_direction_output(ctx->vbus_gpio.gpio, 1); +#endif + setup_usb_phy(ctx->usb); *hccr = ctx->hcd; |