Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (146 commits)
  arm: Use common .lds file where possible
  arm: add a common .lds link script
  arm: Remove unneeded setting of LDCSRIPT
  Define CPUDIR for the .lds link script
  arm: Remove zipitz2 link script
  Allow arch directory to contain .lds without requiring Makefile
  OMAP: Remove omap1610inn-based boards
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
  board/ti/beagle/beagle.c: Fix build warnings
  sdrc.c: Fix typo in do_sdrc_init() for SPL
  tegra: i2c: Add I2C driver
  tegra: fdt: i2c: Add extra I2C bindings for U-Boot
  tegra: i2c: Select I2C ordering for Seaboard
  tegra: i2c: Enable I2C on Seaboard
  tegra: i2c: Select number of controllers for Tegra2 boards
  tegra: i2c: Initialise I2C on Nvidia boards
  tegra: Enhance clock support to handle 16-bit clock divisors
  fdt: Add function to allow aliases to refer to multiple nodes
  tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
  tegra: fdt: Enable FDT support for Ventana
  tegra: fdt: Enable FDT support for Seaboard
  tegra: usb: Enable USB on Seaboard
  tegra: usb: Add common USB defines for tegra2 boards
  tegra: usb: Add USB support to nvidia boards
  arm: Check for valid FDT after console is up
  fdt: Avoid early panic() when there is no FDT present
  tegra: usb: Add support for Tegra USB peripheral
  tegra: fdt: Add function to return peripheral/clock ID
  usb: Add support for txfifo threshold
  tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
  tegra: usb: fdt: Add additional device tree definitions for USB ports
  tegra: fdt: Add clock bindings for Tegra2 Seaboard
  tegra: fdt: Add clock bindings
  tegra: fdt: Add additional USB binding
  fdt: Add tegra-usb bindings file from linux
  fdt: Add staging area for device tree binding documentation
  tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
  tegra: fdt: Add Tegra2x device tree file from kernel
  arm: fdt: Add skeleton device tree file from kernel
  fdt: Add basic support for decoding GPIO definitions
  fdt: Add functions to access phandles, arrays and bools
  fdt: Tidy up a few fdtdec problems
  fdt: Add tests for fdtdec
  fdt: Add fdtdec_find_aliases() to deal with alias nodes
  arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
  net: fec_mxc: allow use with cache enabled
  net: force PKTALIGN to ARCH_DMA_MINALIGN
  i.MX28: Enable caches by default
  i.MX28: Make use of the bounce buffer
  i.MX28: Do data transfers via DMA in MMC driver
  MMC: Implement generic bounce buffer
  i.MX28: Add cache support to MXS NAND driver
  i.MX28: Add cache support into the APBH DMA driver
  ARM926EJS: Implement cache operations
  board/vpac270/onenand.c: Fix build errors
  nhk8815: fix build errors
  atmel-boards: add missing atmel_mci.h
  ARM: highbank: setup env from boot source register
  ARM: highbank: change env config to use nvram
  ARM: highbank: add reset support
  ARM: highbank: Add boot counter support
  ARM: highbank: change TEXT_BASE to 0x8000
  ARM: highbank: fix us_to_tick calculation
  ARM: highbank: add missing get_tbclk
  ARM: highbank: fix warning for calxedaxgmac_initialize
  net: calxedaxgmac: fix build due to missing __aligned definition
  EXYNOS: Add structure for Exynos4 DMC
  EXYNOS: SMDK5250: Support all 4 UARTs
  ARM: fix s3c2410 timer code
  ARM: davinci: fixes for cam_enc_4xx board
  omap3_spi: receive transmit mode
  calimain, enbw_cmc: Fix typo in comments
  Davinci: ea20: use gpio framework to access gpios
  OMAP3: mt_ventoux: sets its own mtdparts
  OMAP3: mt_ventoux: updated timing for FPGA
  twl4030: fix potential power supply handling issues
  NAND: TI: fix warnings in omap_gpmc.c
  cam_enc_4xx: Rename 'images' to 'imgs'
  arm: Add Prep subcommand support to bootm
  OMAP3: twister: add support to boot Linux from SPL
  SPL: call cleanup_before_linux() before booting Linux
  OMAP3: SPL: do not call I2C init if no I2C is set.
  Add cache functions to SPL for armv7
  devkit8000: Implement and activate direct OS boot
  omap/spl: change output of spl_parse_image_header
  omap-common/spl: Add linux boot to SPL
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common: Add NAND SPL linux booting
  devkit8000: add config for spl command
  Add cmd_spl command
  mx53ard: Initialize return code with error
  mx53: Make PLL2 to be the parent of UART clock
  configs: imx: Use CONFIG_SF_DEFAULT_CS
  mx28evk: Provide default values for SPI bus and chip select
  USB: ehci-mx6: Add proper IO accessors
  mx6: Read silicon revision from register
  i.MX28: Drop __naked function from spl_mem_init
  mxs_spi: Return proper timeout error
  i.MX28: Make the stabilization delays shorter
  pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
  mx6: Remove duplicate definition of ANATOP_BASE_ADDR
  mx6: Fix reset cause for Power On Reset case
  i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
  i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
  i.MX28: Enable additional DRAM address bits
  mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
  mx31: add "ARM11P power gating" to get_reset_cause
  mx31pdk: Fix CONFIG_SYS_MEMTEST_END
  efikamx: Fix CONFIG_SYS_MEMTEST_END
  mx53smd: Fix CONFIG_SYS_MEMTEST_END
  mx53evk: Fix CONFIG_SYS_MEMTEST_END
  mx51evk: Fix CONFIG_SYS_MEMTEST_END
  i.MX6: mx6qsabrelite: add ext2 support
  imximage: Remove overwriting of flash_offset
  IXP: Fix GPIO_INT_ACT_LOW_SET()
  IXP: Fix NAND build warning on PDNB3 and SCPU
  IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
  IXP: Squash warnings in IXP NPE
  IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
  IXP: Make IXP buildable with arm-linux- toolchains
  Examples: Properly append LDFLAGS to LD command
  SPL: Enable YMODEM support on BeagleBone and AM335x EVM
  SPL: Add YMODEM over UART load support
  SPL: Add README.omap3
  README: document more SPL config options
  spl.c: Use __noreturn decorator
  config.mk: Check for -fstack-usage support
  config.mk: Make cc-option create a file under include/generated
  ...

6 files changed, 280 insertions, 5 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 5fdc97b8c8..0d4657edf2 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -44,11 +44,13 @@ endif
 COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
 COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
 COBJS-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
+COBJS-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
 COBJS-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
 COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ef5afc22b0..b6422d7d7a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -255,6 +255,13 @@ static int ehci_reset(void)
 #endif
 		ehci_writel(reg_ptr, tmp);
 	}
+
+#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
+	cmd = ehci_readl(&hcor->or_txfilltuning);
+	cmd &= ~TXFIFO_THRESH(0x3f);
+	cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH);
+	ehci_writel(&hcor->or_txfilltuning, cmd);
+#endif
 out:
 	return ret;
 }
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
new file mode 100644
index 0000000000..5dec673c8e
--- /dev/null
+++ b/drivers/usb/host/ehci-mx6.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <errno.h>
+#include <linux/compiler.h>
+#include <usb/ehci-fsl.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/iomux-v3.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+#define USB_OTGREGS_OFFSET	0x000
+#define USB_H1REGS_OFFSET	0x200
+#define USB_H2REGS_OFFSET	0x400
+#define USB_H3REGS_OFFSET	0x600
+#define USB_OTHERREGS_OFFSET	0x800
+
+#define USB_H1_CTRL_OFFSET	0x04
+
+#define USBPHY_CTRL				0x00000030
+#define USBPHY_CTRL_SET				0x00000034
+#define USBPHY_CTRL_CLR				0x00000038
+#define USBPHY_CTRL_TOG				0x0000003c
+
+#define USBPHY_PWD				0x00000000
+#define USBPHY_CTRL_SFTRST			0x80000000
+#define USBPHY_CTRL_CLKGATE			0x40000000
+#define USBPHY_CTRL_ENUTMILEVEL3		0x00008000
+#define USBPHY_CTRL_ENUTMILEVEL2		0x00004000
+
+#define ANADIG_USB2_CHRG_DETECT_EN_B		0x00100000
+#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B	0x00080000
+
+#define ANADIG_USB2_PLL_480_CTRL_BYPASS		0x00010000
+#define ANADIG_USB2_PLL_480_CTRL_ENABLE		0x00002000
+#define ANADIG_USB2_PLL_480_CTRL_POWER		0x00001000
+#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS	0x00000040
+
+
+#define UCTRL_OVER_CUR_POL	(1 << 8) /* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS	(1 << 7) /* Disable OTG Overcurrent Detection */
+
+/* USBCMD */
+#define UH1_USBCMD_OFFSET	0x140
+#define UCMD_RUN_STOP           (1 << 0) /* controller run/stop */
+#define UCMD_RESET		(1 << 1) /* controller reset */
+
+static void usbh1_internal_phy_clock_gate(int on)
+{
+	void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
+
+	phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET;
+	__raw_writel(USBPHY_CTRL_CLKGATE, phy_reg);
+}
+
+static void usbh1_power_config(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	/*
+	 * Some phy and power's special controls for host1
+	 * 1. The external charger detector needs to be disabled
+	 * or the signal at DP will be poor
+	 * 2. The PLL's power and output to usb for host 1
+	 * is totally controlled by IC, so the Software only needs
+	 * to enable them at initializtion.
+	 */
+	__raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
+		     ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
+		     &anatop->usb2_chrg_detect);
+
+	__raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
+		     &anatop->usb2_pll_480_ctrl);
+
+	__raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
+		     ANADIG_USB2_PLL_480_CTRL_POWER |
+		     ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
+		     &anatop->usb2_pll_480_ctrl_set);
+}
+
+static int usbh1_phy_enable(void)
+{
+	void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
+	void __iomem *phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+	void __iomem *usb_cmd =	(void __iomem *)(USBOH3_USB_BASE_ADDR +
+						 USB_H1REGS_OFFSET +
+						 UH1_USBCMD_OFFSET);
+	u32 val;
+
+	/* Stop then Reset */
+	val = __raw_readl(usb_cmd);
+	val &= ~UCMD_RUN_STOP;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RUN_STOP)
+		;
+
+	val = __raw_readl(usb_cmd);
+	val |= UCMD_RESET;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RESET)
+		;
+
+	/* Reset USBPHY module */
+	val = __raw_readl(phy_ctrl);
+	val |= USBPHY_CTRL_SFTRST;
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Remove CLKGATE and SFTRST */
+	val = __raw_readl(phy_ctrl);
+	val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Power up the PHY */
+	__raw_writel(0, phy_reg + USBPHY_PWD);
+	/* enable FS/LS device */
+	val = __raw_readl(phy_reg + USBPHY_CTRL);
+	val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
+	__raw_writel(val, phy_reg + USBPHY_CTRL);
+
+	return 0;
+}
+
+static void usbh1_oc_config(void)
+{
+	void __iomem *usb_base = (void __iomem *)USBOH3_USB_BASE_ADDR;
+	void __iomem *usbother_base = usb_base + USB_OTHERREGS_OFFSET;
+	u32 val;
+
+	val = __raw_readl(usbother_base + USB_H1_CTRL_OFFSET);
+#if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2
+	/* mx6qarm2 seems to required a different setting*/
+	val &= ~UCTRL_OVER_CUR_POL;
+#else
+	val |= UCTRL_OVER_CUR_POL;
+#endif
+	__raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET);
+
+	val = __raw_readl(usbother_base + USB_H1_CTRL_OFFSET);
+	val |= UCTRL_OVER_CUR_DIS;
+	__raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET);
+}
+
+int ehci_hcd_init(void)
+{
+	struct usb_ehci *ehci;
+
+	enable_usboh3_clk(1);
+	mdelay(1);
+
+	/* Do board specific initialization */
+	board_ehci_hcd_init(CONFIG_MXC_USB_PORT);
+
+#if CONFIG_MXC_USB_PORT == 1
+	/* USB Host 1 */
+	usbh1_power_config();
+	usbh1_oc_config();
+	usbh1_internal_phy_clock_gate(1);
+	usbh1_phy_enable();
+#else
+#error "MXC USB port not yet supported"
+#endif
+
+	ehci = (struct usb_ehci *)(USBOH3_USB_BASE_ADDR +
+		(0x200 * CONFIG_MXC_USB_PORT));
+	hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+	hcor = (struct ehci_hcor *)((uint32_t)hccr +
+			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+	setbits_le32(&ehci->usbmode, CM_HOST);
+
+	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+	setbits_le32(&ehci->portsc, USB_EN);
+
+	mdelay(10);
+
+	return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+	return 0;
+}
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
index c795f23bd7..e1bd37ec8d 100644
--- a/drivers/usb/host/ehci-mxs.c
+++ b/drivers/usb/host/ehci-mxs.c
@@ -75,8 +75,8 @@ int ehci_hcd_init(void)
 
 	int ret;
 	uint32_t usb_base, cap_base;
-	struct mx28_register *digctl_ctrl =
-		(struct mx28_register *)HW_DIGCTL_CTRL;
+	struct mx28_register_32 *digctl_ctrl =
+		(struct mx28_register_32 *)HW_DIGCTL_CTRL;
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
@@ -119,8 +119,8 @@ int ehci_hcd_stop(void)
 {
 	int ret;
 	uint32_t tmp;
-	struct mx28_register *digctl_ctrl =
-		(struct mx28_register *)HW_DIGCTL_CTRL;
+	struct mx28_register_32 *digctl_ctrl =
+		(struct mx28_register_32 *)HW_DIGCTL_CTRL;
 	struct mx28_clkctrl_regs *clkctrl_regs =
 		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
 
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
new file mode 100644
index 0000000000..a7e105b992
--- /dev/null
+++ b/drivers/usb/host/ehci-tegra.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2009 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+#include <asm/errno.h>
+#include <asm/arch/usb.h>
+
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	u32 our_hccr, our_hcor;
+
+	/*
+	 * Select the first port, as we don't have a way of selecting others
+	 * yet
+	 */
+	if (tegrausb_start_port(0, &our_hccr, &our_hcor))
+		return -1;
+
+	hccr = (struct ehci_hccr *)our_hccr;
+	hcor = (struct ehci_hcor *)our_hcor;
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+	tegrausb_stop_port();
+	return 0;
+}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 3d0ad0c852..cc00ce428b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -80,7 +80,11 @@ struct ehci_hcor {
 	uint32_t or_ctrldssegment;
 	uint32_t or_periodiclistbase;
 	uint32_t or_asynclistaddr;
-	uint32_t _reserved_[9];
+	uint32_t _reserved_0_;
+	uint32_t or_burstsize;
+	uint32_t or_txfilltuning;
+#define TXFIFO_THRESH(p)		((p & 0x3f) << 16)
+	uint32_t _reserved_1_[6];
 	uint32_t or_configflag;
 #define FLAG_CF		(1 << 0)	/* true:  we'll support "high speed" */
 	uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];