Rename common ns16550 constants with UART_ prefix to prevent conflicts

Fix problems introduced in commit
7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
diagnosis functions for inka4x0] which redefined MSR_RI which is
already used on PowerPC systems.

Also eliminate redundant definitions in ps2mult.h.  More cleanup will
be needed for other redundant occurrences though.

Signed-off-by: Detlev Zundel <dzu@denx.de>

2 files changed, 33 insertions, 28 deletions

diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 1af3fde647..1a5e2d43db 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -1,6 +1,6 @@
 /***********************************************************************
  *
- * (C) Copyright 2004
+ * (C) Copyright 2004-2009
  * DENX Software Engineering
  * Wolfgang Denk, wd@denx.de
  * All rights reserved.
@@ -18,9 +18,11 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
-#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx)
-#include <ns16550.h>
+/* This is needed for ns16550.h */
+#ifndef CONFIG_SYS_NS16550_REG_SIZE
+#define CONFIG_SYS_NS16550_REG_SIZE 1
 #endif
+#include <ns16550.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -128,12 +130,12 @@ int ps2ser_init(void)
 	NS16550_t com_port = (NS16550_t)COM_BASE;
 
 	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE | LCR_8N1;
+	com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
 	com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
 	com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
-	com_port->lcr = LCR_8N1;
-	com_port->mcr = (MCR_DTR | MCR_RTS);
-	com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
+	com_port->lcr = UART_LCR_8N1;
+	com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS);
+	com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR);
 
 	return (0);
 }
@@ -202,7 +204,7 @@ void ps2ser_putc(int chr)
 	psc->psc_buffer_8 = chr;
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	while ((com_port->lsr & LSR_THRE) == 0);
+	while ((com_port->lsr & UART_LSR_THRE) == 0);
 	com_port->thr = chr;
 #else
 	while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
@@ -227,7 +229,7 @@ static int ps2ser_getc_hw(void)
 	}
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	if (com_port->lsr & LSR_DR) {
+	if (com_port->lsr & UART_LSR_DR) {
 		res = com_port->rbr;
 	}
 #else
@@ -315,7 +317,7 @@ static void ps2ser_interrupt(void *dev_id)
 	} while (status & PSC_SR_RXRDY);
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	} while (status & LSR_DR);
+	} while (status & UART_LSR_DR);
 #else
 	} while (status & UART_IIR_RDI);
 #endif
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 397f5df5d6..657c9dadf9 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -7,9 +7,12 @@
 #include <config.h>
 #include <ns16550.h>
 
-#define LCRVAL LCR_8N1					/* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS)			/* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR)	/* Clear & enable FIFOs */
+#define UART_LCRVAL UART_LCR_8N1		/* 8 data, 1 stop, no parity */
+#define UART_MCRVAL (UART_MCR_DTR | \
+		     UART_MCR_RTS)		/* RTS/DTR */
+#define UART_FCRVAL (UART_FCR_FIFO_EN |	\
+		     UART_FCR_RXSR |	\
+		     UART_FCR_TXSR)		/* Clear & enable FIFOs */
 
 void NS16550_init (NS16550_t com_port, int baud_divisor)
 {
@@ -17,16 +20,16 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 #ifdef CONFIG_OMAP
 	com_port->mdr1 = 0x7;	/* mode select reset TL16C750*/
 #endif
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = 0;
 	com_port->dlm = 0;
-	com_port->lcr = LCRVAL;
-	com_port->mcr = MCRVAL;
-	com_port->fcr = FCRVAL;
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCRVAL;
+	com_port->mcr = UART_MCRVAL;
+	com_port->fcr = UART_FCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = baud_divisor & 0xff;
 	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCRVAL;
+	com_port->lcr = UART_LCRVAL;
 #if defined(CONFIG_OMAP)
 #if defined(CONFIG_APTIX)
 	com_port->mdr1 = 3;	/* /13 mode so Aptix 6MHz can hit 115200 */
@@ -40,29 +43,29 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 {
 	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = 0;
 	com_port->dlm = 0;
-	com_port->lcr = LCRVAL;
-	com_port->mcr = MCRVAL;
-	com_port->fcr = FCRVAL;
-	com_port->lcr = LCR_BKSE;
+	com_port->lcr = UART_LCRVAL;
+	com_port->mcr = UART_MCRVAL;
+	com_port->fcr = UART_FCRVAL;
+	com_port->lcr = UART_LCR_BKSE;
 	com_port->dll = baud_divisor & 0xff;
 	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCRVAL;
+	com_port->lcr = UART_LCRVAL;
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
 void NS16550_putc (NS16550_t com_port, char c)
 {
-	while ((com_port->lsr & LSR_THRE) == 0);
+	while ((com_port->lsr & UART_LSR_THRE) == 0);
 	com_port->thr = c;
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
 char NS16550_getc (NS16550_t com_port)
 {
-	while ((com_port->lsr & LSR_DR) == 0) {
+	while ((com_port->lsr & UART_LSR_DR) == 0) {
 #ifdef CONFIG_USB_TTY
 		extern void usbtty_poll(void);
 		usbtty_poll();
@@ -73,7 +76,7 @@ char NS16550_getc (NS16550_t com_port)
 
 int NS16550_tstc (NS16550_t com_port)
 {
-	return ((com_port->lsr & LSR_DR) != 0);
+	return ((com_port->lsr & UART_LSR_DR) != 0);
 }
 
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */