summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorDetlev Zundel <dzu@denx.de>2009-04-23 13:14:20 +0200
committerWolfgang Denk <wd@denx.de>2009-04-28 01:10:24 +0200
commit294f10ca9ea82a15e135dcb0fc658382ab206940 (patch)
tree7871a07282a4b4026bed819f86be6d9e91c1973f /drivers
parent0c8a84916c5dacccdc5b27b63fc463e9f3b04f07 (diff)
mips/vcth: Use generic 16550 uart driver
As the common code also handles baudrate switching, which the board specific vct.c driver did not support, this is one of the rare occassions where deleting code actually adds a feature :) Signed-off-by: Detlev Zundel <dzu@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/Makefile3
-rwxr-xr-xdrivers/serial/vct.c125
2 files changed, 1 insertions, 127 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index bb99a349ac..14c818decc 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2006
+# (C) Copyright 2006-2009
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -50,7 +50,6 @@ COBJS-$(CONFIG_S3C44B0_SERIAL) += serial_s3c44b0.o
COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
COBJS-$(CONFIG_USB_TTY) += usbtty.o
-COBJS-$(CONFIG_VCT_SERIAL) += vct.o
COBJS := $(sort $(COBJS-y))
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/serial/vct.c b/drivers/serial/vct.c
deleted file mode 100755
index 556c114e05..0000000000
--- a/drivers/serial/vct.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_VCT_PLATINUMAVC
-#define UART_1_BASE 0xBDC30000
-#else
-#define UART_1_BASE 0xBF89C000
-#endif
-
-#define UART_RBR_OFF 0x00 /* receiver buffer reg */
-#define UART_THR_OFF 0x00 /* transmit holding reg */
-#define UART_DLL_OFF 0x00 /* divisor latch low reg */
-#define UART_IER_OFF 0x04 /* interrupt enable reg */
-#define UART_DLH_OFF 0x04 /* receiver buffer reg */
-#define UART_FCR_OFF 0x08 /* fifo control register */
-#define UART_LCR_OFF 0x0c /* line control register */
-#define UART_MCR_OFF 0x10 /* modem control register */
-#define UART_LSR_OFF 0x14 /* line status register */
-#define UART_MSR_OFF 0x18 /* modem status register */
-#define UART_SCR_OFF 0x1c /* scratch pad register */
-
-#define UART_RCV_DATA_RDY 0x01 /* Data Received */
-#define UART_XMT_HOLD_EMPTY 0x20
-#define UART_TRANSMIT_EMPTY 0x40
-
-/* 7 bit on line control reg. enalbing rw to dll and dlh */
-#define UART_LCR_DLAB 0x0080
-
-#define UART___9600_BDR 0x84
-#define UART__19200_BDR 0x42
-#define UART_115200_BDR 0x08
-
-#define UART_DIS_ALL_INTER 0x00 /* disable all interrupts */
-
-#define UART_5DATA_BITS 0x0000 /* 5 [bits] 1.5 bits 2 */
-#define UART_6DATA_BITS 0x0001 /* 6 [bits] 1 bits 2 */
-#define UART_7DATA_BITS 0x0002 /* 7 [bits] 1 bits 2 */
-#define UART_8DATA_BITS 0x0003 /* 8 [bits] 1 bits 2 */
-
-static void vct_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
-{
- u32 val = __raw_readl(UART_1_BASE + UART_LCR_OFF);
-
- /* set 7 bit on 1 */
- val |= UART_LCR_DLAB;
- __raw_writel(val, UART_1_BASE + UART_LCR_OFF);
-
- __raw_writel(dl, UART_1_BASE + UART_DLL_OFF);
- __raw_writel(dh, UART_1_BASE + UART_DLH_OFF);
-
- /* set 7 bit on 0 */
- val &= ~UART_LCR_DLAB;
- __raw_writel(val, UART_1_BASE + UART_LCR_OFF);
-
- return;
-}
-
-int serial_init(void)
-{
- __raw_writel(UART_DIS_ALL_INTER, UART_1_BASE + UART_IER_OFF);
- vct_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
- __raw_writel(UART_8DATA_BITS, UART_1_BASE + UART_LCR_OFF);
-
- return 0;
-}
-
-void serial_setbrg(void)
-{
- /*
- * Baudrate change not supported currently, fixed to 115200 baud
- */
-}
-
-void serial_putc(const char c)
-{
- if (c == '\n')
- serial_putc('\r');
-
- while (!(UART_XMT_HOLD_EMPTY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
- ;
-
- __raw_writel(c, UART_1_BASE + UART_THR_OFF);
-}
-
-void serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
-int serial_getc(void)
-{
- while (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
- ;
-
- return __raw_readl(UART_1_BASE + UART_RBR_OFF) & 0xff;
-}
-
-int serial_tstc(void)
-{
- if (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
- return 0;
-
- return 1;
-}