diff options
author | Robert Hancock <hancock@sedsystems.ca> | 2019-06-18 09:47:14 -0600 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2019-07-30 10:20:06 +0200 |
commit | 3372081cfd25e2afaaa043d9da78f7de1cf84636 (patch) | |
tree | 44b8178c9747777b6dcf428a05a4fb8dbb526823 /drivers | |
parent | 25d63a367794d4c559d910a19566b7b15296c7a1 (diff) |
fpga: virtex2: Split out image writing from pre/post operations
This is in preparation for adding slave serial programming support,
which uses the same pre/post operations as slave SelectMAP, to avoid
duplicating code.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/fpga/virtex2.c | 331 |
1 files changed, 174 insertions, 157 deletions
diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index b01a31f080..2383c69210 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -154,202 +154,219 @@ static int virtex2_info(xilinx_desc *desc) * INIT_B and DONE lines. If both are high, configuration has * succeeded. Congratulations! */ -static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_slave_pre(xilinx_virtex2_slave_selectmap_fns *fn, int cookie) { - int ret_val = FPGA_FAIL; - xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; + unsigned long ts; PRINTF("%s:%d: Start with interface functions @ 0x%p\n", __func__, __LINE__, fn); - if (fn) { - size_t bytecount = 0; - unsigned char *data = (unsigned char *)buf; - int cookie = desc->cookie; - unsigned long ts; - - /* Gotta split this one up (so the stack won't blow??) */ - PRINTF("%s:%d: Function Table:\n" - " base 0x%p\n" - " struct 0x%p\n" - " pre 0x%p\n" - " prog 0x%p\n" - " init 0x%p\n" - " error 0x%p\n", - __func__, __LINE__, - &fn, fn, fn->pre, fn->pgm, fn->init, fn->err); - PRINTF(" clock 0x%p\n" - " cs 0x%p\n" - " write 0x%p\n" - " rdata 0x%p\n" - " wdata 0x%p\n" - " busy 0x%p\n" - " abort 0x%p\n" - " post 0x%p\n\n", - fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, - fn->busy, fn->abort, fn->post); + if (!fn) { + printf("%s:%d: NULL Interface function table!\n", + __func__, __LINE__); + return FPGA_FAIL; + } + + /* Gotta split this one up (so the stack won't blow??) */ + PRINTF("%s:%d: Function Table:\n" + " base 0x%p\n" + " struct 0x%p\n" + " pre 0x%p\n" + " prog 0x%p\n" + " init 0x%p\n" + " error 0x%p\n", + __func__, __LINE__, + &fn, fn, fn->pre, fn->pgm, fn->init, fn->err); + PRINTF(" clock 0x%p\n" + " cs 0x%p\n" + " write 0x%p\n" + " rdata 0x%p\n" + " wdata 0x%p\n" + " busy 0x%p\n" + " abort 0x%p\n" + " post 0x%p\n\n", + fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, + fn->busy, fn->abort, fn->post); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - printf("Initializing FPGA Device %d...\n", cookie); + printf("Initializing FPGA Device %d...\n", cookie); #endif - /* - * Run the pre configuration function if there is one. - */ - if (*fn->pre) - (*fn->pre)(cookie); - - /* - * Assert the program line. The minimum pulse width for - * Virtex II devices is 300 nS (Tprogram parameter in - * datasheet). There is no maximum value for the pulse width. - * Check to make sure that INIT_B goes low after assertion of - * PROG_B - */ - (*fn->pgm)(true, true, cookie); - udelay(10); - ts = get_timer(0); - do { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { - printf("%s:%d: ** Timeout after %d ticks waiting for INIT to assert.\n", - __func__, __LINE__, - CONFIG_SYS_FPGA_WAIT_INIT); - (*fn->abort)(cookie); - return FPGA_FAIL; - } - } while (!(*fn->init)(cookie)); + /* + * Run the pre configuration function if there is one. + */ + if (*fn->pre) + (*fn->pre)(cookie); + + /* + * Assert the program line. The minimum pulse width for + * Virtex II devices is 300 nS (Tprogram parameter in datasheet). + * There is no maximum value for the pulse width. Check to make + * sure that INIT_B goes low after assertion of PROG_B + */ + (*fn->pgm)(true, true, cookie); + udelay(10); + ts = get_timer(0); + do { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { + printf("%s:%d: ** Timeout after %d ticks waiting for INIT to assert.\n", + __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_INIT); + (*fn->abort)(cookie); + return FPGA_FAIL; + } + } while (!(*fn->init)(cookie)); - (*fn->pgm)(false, true, cookie); - CONFIG_FPGA_DELAY(); + (*fn->pgm)(false, true, cookie); + CONFIG_FPGA_DELAY(); + if (fn->clk) (*fn->clk)(true, true, cookie); - /* - * Start a timer and wait for INIT_B to go high - */ - ts = get_timer(0); - do { - CONFIG_FPGA_DELAY(); - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { - printf("%s:%d: ** Timeout after %d ticks waiting for INIT to deassert.\n", - __func__, __LINE__, - CONFIG_SYS_FPGA_WAIT_INIT); - (*fn->abort)(cookie); - return FPGA_FAIL; - } - } while ((*fn->init)(cookie) && (*fn->busy)(cookie)); + /* + * Start a timer and wait for INIT_B to go high + */ + ts = get_timer(0); + do { + CONFIG_FPGA_DELAY(); + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { + printf("%s:%d: ** Timeout after %d ticks waiting for INIT to deassert.\n", + __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_INIT); + (*fn->abort)(cookie); + return FPGA_FAIL; + } + } while ((*fn->init)(cookie) && (*fn->busy)(cookie)); + if (fn->wr) (*fn->wr)(true, true, cookie); + if (fn->cs) (*fn->cs)(true, true, cookie); - mdelay(10); - - /* - * Load the data byte by byte - */ - while (bytecount < bsize) { -#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC - if (ctrlc()) { - (*fn->abort)(cookie); - return FPGA_FAIL; - } -#endif + mdelay(10); + return FPGA_SUCCESS; +} - if ((*fn->done)(cookie) == FPGA_SUCCESS) { - PRINTF("%s:%d:done went active early, bytecount = %d\n", - __func__, __LINE__, bytecount); - break; - } +static int virtex2_slave_post(xilinx_virtex2_slave_selectmap_fns *fn, + int cookie) +{ + int ret_val = FPGA_SUCCESS; + unsigned long ts; + + /* + * Finished writing the data; deassert FPGA CS_B and WRITE_B signals. + */ + CONFIG_FPGA_DELAY(); + if (fn->cs) + (*fn->cs)(false, true, cookie); + if (fn->wr) + (*fn->wr)(false, true, cookie); -#ifdef CONFIG_SYS_FPGA_CHECK_ERROR - if ((*fn->init)(cookie)) { - printf("\n%s:%d: ** Error: INIT asserted during configuration\n", - __func__, __LINE__); - printf("%d = buffer offset, %d = buffer size\n", - bytecount, bsize); - (*fn->abort)(cookie); - return FPGA_FAIL; - } +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + putc('\n'); #endif - (*fn->wdata)(data[bytecount++], true, cookie); - CONFIG_FPGA_DELAY(); - - /* - * Cycle the clock pin - */ - (*fn->clk)(false, true, cookie); - CONFIG_FPGA_DELAY(); - (*fn->clk)(true, true, cookie); + /* + * Check for successful configuration. FPGA INIT_B and DONE + * should both be high upon successful configuration. + */ + ts = get_timer(0); + ret_val = FPGA_SUCCESS; + while (((*fn->done)(cookie) == FPGA_FAIL) || + (*fn->init)(cookie)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) { + printf("%s:%d: ** Timeout after %d ticks waiting for DONE to assert and INIT to deassert\n", + __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG); + (*fn->abort)(cookie); + ret_val = FPGA_FAIL; + break; + } + } -#ifdef CONFIG_SYS_FPGA_CHECK_BUSY - ts = get_timer(0); - while ((*fn->busy)(cookie)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_BUSY) { - printf("%s:%d: ** Timeout after %d ticks waiting for BUSY to deassert\n", - __func__, __LINE__, - CONFIG_SYS_FPGA_WAIT_BUSY); - (*fn->abort)(cookie); - return FPGA_FAIL; - } - } + if (ret_val == FPGA_SUCCESS) { +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + printf("Initialization of FPGA device %d complete\n", cookie); #endif - + /* + * Run the post configuration function if there is one. + */ + if (*fn->post) + (*fn->post)(cookie); + } else { #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - if (bytecount % (bsize / 40) == 0) - putc('.'); + printf("** Initialization of FPGA device %d FAILED\n", + cookie); #endif + } + return ret_val; +} + +static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; + size_t bytecount = 0; + unsigned char *data = (unsigned char *)buf; + int cookie = desc->cookie; + + ret_val = virtex2_slave_pre(fn, cookie); + if (ret_val != FPGA_SUCCESS) + return ret_val; + + /* + * Load the data byte by byte + */ + while (bytecount < bsize) { +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) { + (*fn->abort)(cookie); + return FPGA_FAIL; } +#endif - /* - * Finished writing the data; deassert FPGA CS_B and WRITE_B - * signals. - */ - CONFIG_FPGA_DELAY(); - (*fn->cs)(false, true, cookie); - (*fn->wr)(false, true, cookie); + if ((*fn->done)(cookie) == FPGA_SUCCESS) { + PRINTF("%s:%d:done went active early, bytecount = %d\n", + __func__, __LINE__, bytecount); + break; + } -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - putc('\n'); +#ifdef CONFIG_SYS_FPGA_CHECK_ERROR + if ((*fn->init)(cookie)) { + printf("\n%s:%d: ** Error: INIT asserted during configuration\n", + __func__, __LINE__); + printf("%zu = buffer offset, %zu = buffer size\n", + bytecount, bsize); + (*fn->abort)(cookie); + return FPGA_FAIL; + } #endif + (*fn->wdata)(data[bytecount++], true, cookie); + CONFIG_FPGA_DELAY(); + /* - * Check for successful configuration. FPGA INIT_B and DONE - * should both be high upon successful configuration. + * Cycle the clock pin */ + (*fn->clk)(false, true, cookie); + CONFIG_FPGA_DELAY(); + (*fn->clk)(true, true, cookie); + +#ifdef CONFIG_SYS_FPGA_CHECK_BUSY ts = get_timer(0); - ret_val = FPGA_SUCCESS; - while (((*fn->done)(cookie) == FPGA_FAIL) || - (*fn->init)(cookie)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) { - printf("%s:%d: ** Timeout after %d ticks waiting for DONE toassert and INIT to deassert\n", + while ((*fn->busy)(cookie)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_BUSY) { + printf("%s:%d: ** Timeout after %d ticks waiting for BUSY to deassert\n", __func__, __LINE__, - CONFIG_SYS_FPGA_WAIT_CONFIG); + CONFIG_SYS_FPGA_WAIT_BUSY); (*fn->abort)(cookie); - ret_val = FPGA_FAIL; - break; + return FPGA_FAIL; } } - - if (ret_val == FPGA_SUCCESS) { -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - printf("Initialization of FPGA device %d complete\n", - cookie); #endif - /* - * Run the post configuration function if there is one. - */ - if (*fn->post) - (*fn->post)(cookie); - } else { + #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - printf("** Initialization of FPGA device %d FAILED\n", - cookie); + if (bytecount % (bsize / 40) == 0) + putc('.'); #endif - } - } else { - printf("%s:%d: NULL Interface function table!\n", - __func__, __LINE__); } - return ret_val; + + return virtex2_slave_post(fn, cookie); } /* |