diff options
author | Marek Vasut <marek.vasut+renesas@gmail.com> | 2019-08-11 12:21:08 +0200 |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2019-08-22 18:23:36 +0200 |
commit | 3ff134b7f1c06f8482ef8ab296d5a89743d219db (patch) | |
tree | 246238a7e086d3b0ca348f00301c08d753797f68 /drivers | |
parent | 0b80f212824f632f1acb0d74fd932c05a0262fc3 (diff) |
usb: r8a66597: Make CONFIG_RZA_USB default
No other platforms use this r8a66597 controller but RZ/A1,
make RZ/A1 support the default and drop all the other SoC
support to remove ifdeffery.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/host/r8a66597-hcd.c | 35 | ||||
-rw-r--r-- | drivers/usb/host/r8a66597.h | 39 |
2 files changed, 0 insertions, 74 deletions
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 8cca09f6d8..d144b57a61 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -70,20 +70,6 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) } } while ((tmp & USBE) != USBE); r8a66597_bclr(r8a66597, USBE, SYSCFG0); -#if !defined(CONFIG_RZA_USB) - r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0); - - i = 0; - r8a66597_bset(r8a66597, XCKE, SYSCFG0); - do { - udelay(1000); - tmp = r8a66597_read(r8a66597, SYSCFG0); - if (i++ > 500) { - printf("register access fail.\n"); - return -1; - } - } while ((tmp & SCKE) != SCKE); -#else /* * RZ/A Only: * Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0 @@ -96,28 +82,18 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) setbits(le16, R8A66597_BASE0, UPLLE); mdelay(1); r8a66597_bset(r8a66597, SUSPM, SUSPMODE0); -#endif /* CONFIG_RZA_USB */ return 0; } static void r8a66597_clock_disable(struct r8a66597 *r8a66597) { -#if !defined(CONFIG_RZA_USB) - r8a66597_bclr(r8a66597, SCKE, SYSCFG0); - udelay(1); - r8a66597_bclr(r8a66597, PLLC, SYSCFG0); - r8a66597_bclr(r8a66597, XCKE, SYSCFG0); - r8a66597_bclr(r8a66597, USBE, SYSCFG0); -#else r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0); clrbits(le16, R8A66597_BASE0, UPLLE); mdelay(1); r8a66597_bclr(r8a66597, USBE, SYSCFG0); mdelay(1); - -#endif } static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) @@ -127,10 +103,6 @@ static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) val = port ? DRPD : DCFM | DRPD; r8a66597_bset(r8a66597, val, get_syscfg_reg(port)); r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); - -#if !defined(CONFIG_RZA_USB) - r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port)); -#endif } static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port) @@ -160,9 +132,6 @@ static int enable_controller(struct r8a66597 *r8a66597) if (ret < 0) return ret; -#if !defined(CONFIG_RZA_USB) - r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG); -#endif r8a66597_bset(r8a66597, USBE, SYSCFG0); r8a66597_bset(r8a66597, INTL, SOFCFG); @@ -280,16 +249,13 @@ static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev, unsigned long setup_addr = USBREQ; u16 intsts1; int timeout = 3000; -#if defined(CONFIG_RZA_USB) u16 dcpctr; -#endif u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum; r8a66597_write(r8a66597, make_devsel(devsel) | (8 << dev->maxpacketsize), DCPMAXP); r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1); -#if defined(CONFIG_RZA_USB) dcpctr = r8a66597_read(r8a66597, DCPCTR); if ((dcpctr & PID) == PID_BUF) { if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr, @@ -298,7 +264,6 @@ static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev, return -ETIMEDOUT; } } -#endif for (i = 0; i < 4; i++) { r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr); diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index 4859e26355..1e370cdd6c 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -89,27 +89,14 @@ #define SUSPMODE0 0x102 /* RZ/A only */ /* System Configuration Control Register */ -#if !defined(CONFIG_RZA_USB) -#define XTAL 0xC000 /* b15-14: Crystal selection */ -#define XTAL48 0x8000 /* 48MHz */ -#define XTAL24 0x4000 /* 24MHz */ -#define XTAL12 0x0000 /* 12MHz */ -#define XCKE 0x2000 /* b13: External clock enable */ -#define PLLC 0x0800 /* b11: PLL control */ -#define SCKE 0x0400 /* b10: USB clock enable */ -#define PCSDIS 0x0200 /* b9: not CS wakeup */ -#define LPSME 0x0100 /* b8: Low power sleep mode */ -#endif #define HSE 0x0080 /* b7: Hi-speed enable */ #define DCFM 0x0040 /* b6: Controller function select */ #define DRPD 0x0020 /* b5: D+/- pull down control */ #define DPRPU 0x0010 /* b4: D+ pull up control */ -#if defined(CONFIG_RZA_USB) #define XTAL 0x0004 /* b2: Crystal selection */ #define XTAL12 0x0004 /* 12MHz */ #define XTAL48 0x0000 /* 48MHz */ #define UPLLE 0x0002 /* b1: internal PLL control */ -#endif #define USBE 0x0001 /* b0: USB module operation enable */ /* System Configuration Status Register */ @@ -178,11 +165,7 @@ #define REW 0x4000 /* b14: Buffer rewind */ #define DCLRM 0x2000 /* b13: DMA buffer clear mode */ #define DREQE 0x1000 /* b12: DREQ output enable */ -#if !defined(CONFIG_RZA_USB) -#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */ -#else #define MBW 0x0800 /* b10: Maximum bit width for FIFO access */ -#endif #define MBW_8 0x0000 /* 8bit */ #define MBW_16 0x0400 /* 16bit */ #define MBW_32 0x0800 /* 32bit */ @@ -427,7 +410,6 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, int len) { int i; -#if defined(CONFIG_RZA_USB) unsigned long fifoaddr = r8a66597->reg + offset; unsigned long count; unsigned long *p = buf; @@ -440,13 +422,6 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, unsigned long tmp = inl(fifoaddr); memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03); } -#else - unsigned short *p = buf; - - len = (len + 1) / 2; - for (i = 0; i < len; i++) - p[i] = inw(r8a66597->reg + offset); -#endif } static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, @@ -461,7 +436,6 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, { int i; unsigned long fifoaddr = r8a66597->reg + offset; -#if defined(CONFIG_RZA_USB) unsigned long count; unsigned char *pb; unsigned long *p = buf; @@ -479,19 +453,6 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, outb(pb[i], fifoaddr + 3 - i); } } -#else - int odd = len & 0x0001; - unsigned short *p = buf; - - len = len / 2; - for (i = 0; i < len; i++) - outw(p[i], fifoaddr); - - if (odd) { - unsigned char *pb = (unsigned char *)(buf + len); - outb(*pb, fifoaddr); - } -#endif } static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, |