Add support for multiple PHYs.

3 files changed, 133 insertions, 27 deletions

diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index 0054e87571..04c17f69f6 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -26,6 +26,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <pci.h>
+#include <miiphy.h>
 
 #undef DEBUG
 
@@ -271,49 +272,124 @@ static inline void OUTL (struct eth_device *dev, int command, u_long addr)
 	*(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
 }
 
-#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
 static inline int INL (struct eth_device *dev, u_long addr)
 {
 	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
 }
 
-int miiphy_read (unsigned char	addr,
-		unsigned char  reg,
-		unsigned short *value)
+static int get_phyreg (struct eth_device *dev, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
-	int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
-
-	struct eth_device *dev = eth_get_dev ();
+	int cmd;
+	int timeout = 50;
 
+	/* read requested data */
+	cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 	OUTL (dev, cmd, SCBCtrlMDI);
 
 	do {
+		udelay(1000);
 		cmd = INL (dev, SCBCtrlMDI);
-	} while (!(cmd & (1 << 28)));
+	} while (!(cmd & (1 << 28)) && (--timeout));
+
+	if (timeout == 0)
+		return -1;
 
 	*value = (unsigned short) (cmd & 0xffff);
 
 	return 0;
 }
 
-int miiphy_write (unsigned char	 addr,
-		unsigned char  reg,
-		unsigned short value)
+static int set_phyreg (struct eth_device *dev, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
-	int cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
-
-	struct eth_device *dev = eth_get_dev ();
+	int cmd;
+	int timeout = 50;
 
+	/* write requested data */
+	cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 	OUTL (dev, cmd | value, SCBCtrlMDI);
 
-	while (!(INL (dev, SCBCtrlMDI) & (1 << 28)));
+	while (!(INL (dev, SCBCtrlMDI) & (1 << 28)) && (--timeout))
+		udelay(1000);
+
+	if (timeout == 0)
+		return -1;
 
 	return 0;
 }
-#endif /* (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
 
-	/* Wait for the chip get the command.
-	 */
+/* Check if given phyaddr is valid, i.e. there is a PHY connected.
+ * Do this by checking model value field from ID2 register.
+ */
+static struct eth_device* verify_phyaddr (char *devname, unsigned char addr)
+{
+	struct eth_device *dev;
+	unsigned short value;
+	unsigned char model;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		return NULL;
+	}
+
+	/* read id2 register */
+	if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+		printf("%s: mii read timeout!\n", devname);
+		return NULL;
+	}
+
+	/* get model */
+	model = (unsigned char)((value >> 4) & 0x003f);
+
+	if (model == 0) {
+		printf("%s: no PHY at address %d\n", devname, addr);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int eepro100_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
+{
+	struct eth_device *dev;
+
+	dev = verify_phyaddr(devname, addr);
+	if (dev == NULL)
+		return -1;
+
+	if (get_phyreg(dev, addr, reg, value) != 0) {
+		printf("%s: mii read timeout!\n", devname);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int eepro100_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
+{
+	struct eth_device *dev;
+
+	dev = verify_phyaddr(devname, addr);
+	if (dev == NULL)
+		return -1;
+
+	if (set_phyreg(dev, addr, reg, value) != 0) {
+		printf("%s: mii write timeout!\n", devname);
+		return -1;
+	}
+
+	return 0;
+}
+
+#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+/* Wait for the chip get the command.
+*/
 static int wait_for_eepro100 (struct eth_device *dev)
 {
 	int i;
@@ -386,6 +462,12 @@ int eepro100_initialize (bd_t * bis)
 
 		eth_register (dev);
 
+#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		/* register mii command access routines */
+		miiphy_register(dev->name,
+				eepro100_miiphy_read, eepro100_miiphy_write);
+#endif
+
 		card_number++;
 
 		/* Set the latency timer for value.
diff --git a/drivers/ns7520_eth.c b/drivers/ns7520_eth.c
index bcdc27fa85..a5a20dfd72 100644
--- a/drivers/ns7520_eth.c
+++ b/drivers/ns7520_eth.c
@@ -767,8 +767,8 @@ enum mii_status {
 /**
  * Read a 16-bit value from an MII register.
  */
-extern int miiphy_read(unsigned char const addr, unsigned char const reg,
-		       unsigned short *const value)
+extern int ns7520_miiphy_read(char *devname, unsigned char const addr,
+		unsigned char const reg, unsigned short *const value)
 {
 	int ret = MII_STATUS_FAILURE;
 
@@ -813,8 +813,8 @@ extern int miiphy_read(unsigned char const addr, unsigned char const reg,
 /**
  * Write a 16-bit value to an MII register.
  */
-extern int miiphy_write(unsigned char const addr, unsigned char const reg,
-			unsigned short const value)
+extern int ns7520_miiphy_write(char *devname, unsigned char const addr,
+		unsigned char const reg, unsigned short const value)
 {
 	int ret = MII_STATUS_FAILURE;
 
@@ -847,3 +847,13 @@ extern int miiphy_write(unsigned char const addr, unsigned char const reg,
 }
 #endif				/* defined(CONFIG_MII) */
 #endif				/* CONFIG_DRIVER_NS7520_ETHERNET */
+
+int ns7520_miiphy_initialize(bd_t *bis)
+{
+#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
+#if defined(CONFIG_MII)
+	miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write);
+#endif
+#endif
+	return 0;
+}
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 069a42fe31..f860dae8b0 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -21,8 +21,9 @@
 
 #if defined(CONFIG_TSEC_ENET)
 #include "tsec.h"
+#include "miiphy.h"
 
-#define TX_BUF_CNT 2
+#define TX_BUF_CNT		2
 
 static uint rxIdx;	/* index of the current RX buffer */
 static uint txIdx;	/* index of the current TX buffer */
@@ -120,6 +121,10 @@ struct phy_info * get_phy_info(struct eth_device *dev);
 void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
 static void adjust_link(struct eth_device *dev);
 static void relocate_cmds(void);
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value);
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value);
 
 /* Initialize device structure. Returns success if PHY
  * initialization succeeded (i.e. if it recognizes the PHY)
@@ -169,6 +174,11 @@ int tsec_initialize(bd_t *bis, int index, char *devname)
 	priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
 	priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
+	&& !defined(BITBANGMII)
+	miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
+#endif
+
 	/* Try to initialize PHY here, and return */
 	return init_phy(dev);
 }
@@ -1058,7 +1068,8 @@ static void relocate_cmds(void)
 }
 
 
-#ifndef CONFIG_BITBANGMII
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
+	&& !defined(BITBANGMII)
 
 struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
 {
@@ -1078,7 +1089,8 @@ struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
  * Returns:
  *  0 on success
  */
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
 	unsigned short ret;
 	struct tsec_private *priv = get_priv_for_phy(addr);
@@ -1100,7 +1112,8 @@ int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
  * Returns:
  *  0 on success
  */
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	struct tsec_private *priv = get_priv_for_phy(addr);
 
@@ -1114,6 +1127,7 @@ int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
 	return 0;
 }
 
-#endif /* CONFIG_BITBANGMII */
+#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		&& !defined(BITBANGMII) */
 
 #endif /* CONFIG_TSEC_ENET */