diff options
| author | Marek Vasut <marek.vasut@gmail.com> | 2017-09-12 19:09:31 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2017-09-26 10:57:53 +0200 |
| commit | 72443c7f7d2174903e73ee88dcb4364e0387bbb2 (patch) | |
| tree | 2444e445363b16d59c133d1b2aa4a05917033642 /drivers | |
| parent | 1ec0a37e1cf2add5680b8d7305922c8210c3e2ed (diff) | |
mtd: cfi: Add support for status register polling
The status register is optional in the AMD command sets, but it's
presence can be checked by reading out CFI table entry 0xc bit 0.
If the register is present, prefer using it's bit 7 to determine
if the flash is busy over reading the flash ; this is needed ie.
on Hyperflash memories.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/cfi_flash.c | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index df04a425e2..8a5babea7b 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -544,7 +544,16 @@ static int flash_is_busy (flash_info_t * info, flash_sect_t sect) #ifdef CONFIG_FLASH_CFI_LEGACY case CFI_CMDSET_AMD_LEGACY: #endif - retval = flash_toggle (info, sect, 0, AMD_STATUS_TOGGLE); + if (info->sr_supported) { + flash_write_cmd (info, sect, info->addr_unlock1, + FLASH_CMD_READ_STATUS); + retval = !flash_isset (info, sect, 0, + FLASH_STATUS_DONE); + } else { + retval = flash_toggle (info, sect, 0, + AMD_STATUS_TOGGLE); + } + break; default: retval = 0; @@ -1685,6 +1694,7 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) { ushort bankId = 0; uchar manuId; + uchar lsbits; flash_write_cmd(info, 0, 0, AMD_CMD_RESET); flash_unlock_seq(info, 0); @@ -1700,6 +1710,9 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) } info->manufacturer_id = manuId; + lsbits = flash_read_uchar(info, FLASH_OFFSET_LOWER_SW_BITS); + info->sr_supported = lsbits & BIT(0); + switch (info->chipwidth){ case FLASH_CFI_8BIT: info->device_id = flash_read_uchar (info, |