diff options
author | Chen-Yu Tsai <wens@csie.org> | 2016-05-02 10:28:15 +0800 |
---|---|---|
committer | Hans de Goede <hdegoede@redhat.com> | 2016-05-25 17:52:39 +0200 |
commit | 795857df413aea278af95305d4b6ffc48089d6e8 (patch) | |
tree | 40a032679460e32ab248a89438d000bef6c5385b /drivers | |
parent | 511992695de9309b53a291caa5ff9bce62d44ae4 (diff) |
sunxi: power: add AXP809 support
The A80 uses the AXP809 as its primary PMIC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/power/Kconfig | 72 | ||||
-rw-r--r-- | drivers/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/axp809.c | 238 |
3 files changed, 285 insertions, 26 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index d1375369c1..3c44167805 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -41,6 +41,13 @@ config AXP221_POWER Select this to enable support for the axp221/axp223 pmic found on most A23 and A31 boards. +config AXP809_POWER + boolean "axp809 pmic support" + depends on MACH_SUN9I + select CMD_POWEROFF + ---help--- + Say y here to enable support for the axp809 pmic found on A80 boards. + config AXP818_POWER boolean "axp818 pmic support" depends on MACH_SUN8I_A83T @@ -60,36 +67,39 @@ endchoice config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 3300 if AXP818_POWER - default 3000 if MACH_SUN6I || MACH_SUN8I + default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for generic 3.3V IO voltage for external devices like the lcd-panal and sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to - safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T - dcdc1 is used for VCC-IO, nand, usb0, sd , etc. + save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T + dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally + powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG. config AXP_DCDC2_VOLT int "axp pmic dcdc2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 900 if AXP818_POWER default 1400 if AXP152_POWER || AXP209_POWER default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I + default 0 if MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to disable dcdc2. On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V. + On A80 boards dcdc2 powers the GPU and can be left off. On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V. config AXP_DCDC3_VOLT int "axp pmic dcdc3 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER - default 900 if AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + default 900 if AXP809_POWER || AXP818_POWER default 1500 if AXP152_POWER default 1250 if AXP209_POWER default 1200 if MACH_SUN6I || MACH_SUN8I @@ -100,51 +110,55 @@ config AXP_DCDC3_VOLT should be 1.25V. On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. + On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V. On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V. config AXP_DCDC4_VOLT int "axp pmic dcdc4 voltage" - depends on AXP152_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 1250 if AXP152_POWER default 1200 if MACH_SUN6I default 0 if MACH_SUN8I + default 900 if MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to disable dcdc4. On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. On A23 / A33 boards dcdc4 is unused and should be disabled. + On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V. On A83T boards dcdc4 is used for VDD-GPU. config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" - depends on AXP221_POWER || AXP818_POWER - default 1500 if MACH_SUN6I || MACH_SUN8I + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to disable dcdc5. - On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V, - 1.35V if DDR3L is used. + On A23 / A31 / A33 / A80 / A83T boards dcdc5 is VCC-DRAM and + should be 1.5V, 1.35V if DDR3L is used. config AXP_ALDO1_VOLT int "axp pmic (a)ldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 if MACH_SUN6I default 1800 if MACH_SUN8I_A83T - default 3000 if MACH_SUN8I + default 3000 if MACH_SUN8I || MACH_SUN9I ---help--- Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to disable aldo1. On A31 boards aldo1 is often used to power the wifi module. On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V. + On A80 boards aldo1 powers the USB hosts and should be 3.0V. On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and should be 1.8V. config AXP_ALDO2_VOLT int "axp pmic (a)ldo2 voltage" - depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 3000 if AXP152_POWER || AXP209_POWER - default 0 if MACH_SUN6I + default 0 if MACH_SUN6I || MACH_SUN9I default 1800 if MACH_SUN8I_A83T default 2500 if MACH_SUN8I ---help--- @@ -154,19 +168,21 @@ config AXP_ALDO2_VOLT On A31 boards aldo2 is typically unused and should be disabled. On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V. On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V. + On A80 boards aldo2 powers PB pingroup and camera IO and can be left off. On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC, LPDDR2, and the codec. It should be 1.8V. config AXP_ALDO3_VOLT int "axp pmic (a)ldo3 voltage" - depends on AXP209_POWER || AXP221_POWER || AXP818_POWER - default 0 if AXP209_POWER + depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER + default 0 if AXP209_POWER || MACH_SUN9I default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. + On A80 boards aldo3 is normally not used. On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be 3.0V. @@ -181,21 +197,23 @@ config AXP_ALDO4_VOLT config AXP_DLDO1_VOLT int "axp pmic dldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used - to power the ethernet phy. On sun8i (A23) boards this is often used to - power the wifi. + to power the ethernet phy. On A23, A33 and A80 boards this is often + used to power the wifi. config AXP_DLDO2_VOLT int "axp pmic dldo2 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 3000 if MACH_SUN9I default 0 ---help--- Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to disable dldo2. + On A80 boards dldo2 normally powers the PL pins and should be 3.0V. config AXP_DLDO3_VOLT int "axp pmic dldo3 voltage" @@ -215,7 +233,7 @@ config AXP_DLDO4_VOLT config AXP_ELDO1_VOLT int "axp pmic eldo1 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to @@ -223,7 +241,7 @@ config AXP_ELDO1_VOLT config AXP_ELDO2_VOLT int "axp pmic eldo2 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to @@ -231,13 +249,15 @@ config AXP_ELDO2_VOLT config AXP_ELDO3_VOLT int "axp pmic eldo3 voltage" - depends on AXP221_POWER || AXP818_POWER + depends on AXP221_POWER || AXP809_POWER || AXP818_POWER + default 3000 if MACH_SUN9I default 0 ---help--- Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to disable eldo3. On some A31(s) tablets it might be used to supply 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). + On A80 boards it powers the PM pingroup and should be 3.0V. config AXP_FLDO1_VOLT int "axp pmic fldo1 voltage" @@ -268,7 +288,7 @@ config AXP_FLDO3_VOLT config AXP_SW_ON bool "axp pmic sw on" - depends on AXP818_POWER + depends on AXP809_POWER || AXP818_POWER default n ---help--- Enable to turn on axp pmic sw. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 690faa0f5e..b43523e628 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AS3722_POWER) += as3722.o obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP221_POWER) += axp221.o +obj-$(CONFIG_AXP809_POWER) += axp809.o obj-$(CONFIG_AXP818_POWER) += axp818.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o diff --git a/drivers/power/axp809.c b/drivers/power/axp809.c new file mode 100644 index 0000000000..c8b76cf9b7 --- /dev/null +++ b/drivers/power/axp809.c @@ -0,0 +1,238 @@ +/* + * AXP809 driver based on AXP221 driver + * + * + * (C) Copyright 2016 Chen-Yu Tsai <wens@csie.org> + * + * Based on axp221.c + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pmic_bus.h> +#include <axp_pmic.h> + +static u8 axp809_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +int axp_set_dcdc1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 1600, 3400, 100); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC1_EN); + + ret = pmic_bus_write(AXP809_DCDC1_CTRL, cfg); + if (ret) + return ret; + + ret = pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DC1SW_EN); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC1_EN); +} + +int axp_set_dcdc2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1540, 20); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC2_EN); + + ret = pmic_bus_write(AXP809_DCDC2_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC2_EN); +} + +int axp_set_dcdc3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1860, 20); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC3_EN); + + ret = pmic_bus_write(AXP809_DCDC3_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC3_EN); +} + +int axp_set_dcdc4(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 600, 1540, 20); + + if (mvolt >= 1540) + cfg = 0x30 + axp809_mvolt_to_cfg(mvolt, 1800, 2600, 100); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC4_EN); + + ret = pmic_bus_write(AXP809_DCDC5_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC4_EN); +} + +int axp_set_dcdc5(unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 1000, 2550, 50); + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC5_EN); + + ret = pmic_bus_write(AXP809_DCDC5_CTRL, cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_DCDC5_EN); +} + +int axp_set_aldo(int aldo_num, unsigned int mvolt) +{ + int ret; + u8 cfg; + + if (aldo_num < 1 || aldo_num > 3) + return -EINVAL; + + if (mvolt == 0 && aldo_num == 3) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ALDO3_EN); + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); + + cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + ret = pmic_bus_write(AXP809_ALDO1_CTRL + (aldo_num - 1), cfg); + if (ret) + return ret; + + if (aldo_num == 3) + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ALDO3_EN); + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); +} + +/* TODO: re-work other AXP drivers to consolidate ALDO functions. */ +int axp_set_aldo1(unsigned int mvolt) +{ + return axp_set_aldo(1, mvolt); +} + +int axp_set_aldo2(unsigned int mvolt) +{ + return axp_set_aldo(2, mvolt); +} + +int axp_set_aldo3(unsigned int mvolt) +{ + return axp_set_aldo(3, mvolt); +} + +int axp_set_dldo(int dldo_num, unsigned int mvolt) +{ + u8 cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + int ret; + + if (dldo_num < 1 || dldo_num > 2) + return -EINVAL; + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1)); + + if (dldo_num == 1 && mvolt > 3300) + cfg += 1 + axp809_mvolt_to_cfg(mvolt, 3400, 4200, 200); + ret = pmic_bus_write(AXP809_DLDO1_CTRL + (dldo_num - 1), cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1)); +} + +int axp_set_eldo(int eldo_num, unsigned int mvolt) +{ + int ret; + u8 cfg = axp809_mvolt_to_cfg(mvolt, 700, 3300, 100); + + if (eldo_num < 1 || eldo_num > 3) + return -EINVAL; + + if (mvolt == 0) + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); + + ret = pmic_bus_write(AXP809_ELDO1_CTRL + (eldo_num - 1), cfg); + if (ret) + return ret; + + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); +} + +int axp_set_sw(bool on) +{ + if (on) + return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_SWOUT_EN); + + return pmic_bus_clrbits(AXP809_OUTPUT_CTRL2, + AXP809_OUTPUT_CTRL2_SWOUT_EN); +} + +int axp_init(void) +{ + int ret; + + ret = pmic_bus_init(); + if (ret) + return ret; + + return 0; +} + +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + pmic_bus_write(AXP809_SHUTDOWN, AXP809_SHUTDOWN_POWEROFF); + + /* infinite loop during shutdown */ + while (1) {} + + /* not reached */ + return 0; +} |