diff options
author | Scott Wood <scottwood@freescale.com> | 2008-10-24 16:20:43 -0500 |
---|---|---|
committer | Scott Wood <scottwood@freescale.com> | 2008-10-29 10:42:16 -0500 |
commit | c45912d8abc52de796b9059a58faf7c4166eab58 (patch) | |
tree | a1b020b0dd2c78af2663f79915d128f99145bc34 /drivers | |
parent | b1d0db1805c3395149777e507b6da53410abac4e (diff) |
NAND: sync with 2.6.27
This brings the core NAND code up to date with the Linux kernel.
Since there were several drivers in Linux as of the last update that are
not in u-boot, I'm not bringing over new drivers that have been added
since in the absence of an interested party.
I did not update OneNAND since it was recently synced by Kyungmin Park,
and I'm not sure exactly what the common ancestor is.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/nand/diskonchip.c | 43 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 127 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_bbt.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_ecc.c | 7 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_ids.c | 3 | ||||
-rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 2 |
6 files changed, 141 insertions, 43 deletions
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 4cba8100a5..e9dc4d1fd5 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -15,8 +15,6 @@ * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de> * * Interface to generic NAND code for M-Systems DiskOnChip devices - * - * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $ */ #include <common.h> @@ -58,13 +56,6 @@ static unsigned long __initdata doc_locations[] = { 0xe0000, 0xe2000, 0xe4000, 0xe6000, 0xe8000, 0xea000, 0xec000, 0xee000, #endif /* CONFIG_MTD_DOCPROBE_HIGH */ -#elif defined(__PPC__) - 0xe4000000, -#elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, - 0xff000000, -#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) - 0xff000000, #else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif @@ -229,7 +220,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) } } /* If the parity is wrong, no rescue possible */ - return parity ? -1 : nerr; + return parity ? -EBADMSG : nerr; } static void DoC_Delay(struct doc_priv *doc, unsigned short cycles) @@ -1044,7 +1035,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); else WriteDOC(DOC_ECC_DIS, docptr, ECCConf); - if (no_ecc_failures && (ret == -1)) { + if (no_ecc_failures && (ret == -EBADMSG)) { printk(KERN_ERR "suppressing ECC failure\n"); ret = 0; } @@ -1139,9 +1130,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1249,12 +1240,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1291,12 +1282,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index fe34a4864b..4069ab1278 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -7,7 +7,7 @@ * Basic support for AG-AND chips is provided. * * Additional technical information is available on - * http://www.linux-mtd.infradead.org/tech/nand.html + * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * 2002-2006 Thomas Gleixner (tglx@linutronix.de) @@ -24,6 +24,7 @@ * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. + * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -128,7 +129,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, static int nand_wait(struct mtd_info *mtd, struct nand_chip *this); /* - * For devices which display every fart in the system on a seperate LED. Is + * For devices which display every fart in the system on a separate LED. Is * compiled away when LED support is disabled. */ /* XXX U-BOOT XXX */ @@ -412,6 +413,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* We write two bytes, so we dont have to mess with 16 bit * access */ + nand_get_device(chip, mtd, FL_WRITING); ofs += mtd->oobsize; chip->ops.len = chip->ops.ooblen = 2; chip->ops.datbuf = NULL; @@ -419,9 +421,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->ops.ooboffs = chip->badblockpos & ~0x01; ret = nand_do_write_oob(mtd, ofs, &chip->ops); + nand_release_device(mtd); } if (!ret) mtd->ecc_stats.badblocks++; + return ret; } @@ -911,7 +915,88 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat == -1) + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/** + * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @dataofs offset of requested data within the page + * @readlen data length + * @buf: buffer to store read data + */ +static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) +{ + int start_step, end_step, num_steps; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; + int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; + + /* Column address wihin the page aligned to ECC size (256bytes). */ + start_step = data_offs / chip->ecc.size; + end_step = (data_offs + readlen - 1) / chip->ecc.size; + num_steps = end_step - start_step + 1; + + /* Data size aligned to ECC ecc.size*/ + datafrag_len = num_steps * chip->ecc.size; + eccfrag_len = num_steps * chip->ecc.bytes; + + data_col_addr = start_step * chip->ecc.size; + /* If we read not a page aligned data */ + if (data_col_addr != 0) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); + + p = bufpoi + data_col_addr; + chip->read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) + chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); + + /* The performance is faster if to position offsets + according to ecc.pos. Let make sure here that + there are no gaps in ecc positions */ + for (i = 0; i < eccfrag_len - 1; i++) { + if (eccpos[i + start_step * chip->ecc.bytes] + 1 != + eccpos[i + start_step * chip->ecc.bytes + 1]) { + gaps = 1; + break; + } + } + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + } else { + /* send the command to read the particular ecc bytes */ + /* take care about buswidth alignment in read_buf */ + aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1); + aligned_len = eccfrag_len; + if (eccpos[start_step * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1); + chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + + for (i = 0; i < eccfrag_len; i++) + chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]]; + + p = bufpoi + data_col_addr; + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { + int stat; + + stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -996,7 +1081,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat == -1) + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1116,6 +1201,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) + ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi); if (ret < 0) @@ -1123,7 +1210,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Transfer not aligned data */ if (!aligned) { - chip->pagebuf = realpage; + if (!NAND_SUBPAGE_READ(chip) && !oob) + chip->pagebuf = realpage; memcpy(buf, chip->buffers->databuf + col, bytes); } @@ -2193,13 +2281,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; - /* Do call back function */ - if (!ret) - mtd_erase_callback(instr); /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + /* * If BBT requires refresh and erase was successful, rewrite any * selected bad block tables @@ -2356,6 +2445,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, { struct nand_flash_dev *type = NULL; int i, dev_id, maf_idx; + int tmp_id, tmp_manf; /* Select the device */ chip->select_chip(mtd, 0); @@ -2367,6 +2457,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, *maf_id = chip->read_byte(mtd); dev_id = chip->read_byte(mtd); + /* Try again to make sure, as some systems the bus-hold or other + * interface concerns can cause random data which looks like a + * possibly credible NAND flash to appear. If the two results do + * not match, ignore the device completely. + */ + + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + + tmp_manf = chip->read_byte(mtd); + tmp_id = chip->read_byte(mtd); + + if (tmp_manf != *maf_id || tmp_id != dev_id) { + printk(KERN_INFO "%s: second ID read did not match " + "%02x,%02x against %02x,%02x\n", __func__, + *maf_id, dev_id, tmp_manf, tmp_id); + return ERR_PTR(-ENODEV); + } + /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (dev_id == nand_flash_ids[i].id) { @@ -2630,6 +2740,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.calculate = nand_calculate_ecc; chip->ecc.correct = nand_correct_data; chip->ecc.read_page = nand_read_page_swecc; + chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index b3b740da64..d68a315f19 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -6,8 +6,6 @@ * * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) * - * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index ee1f6cc8a8..94923b9524 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -9,8 +9,6 @@ * * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de> * - * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $ - * * This file is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 or (at your option) any @@ -47,7 +45,8 @@ #include <linux/mtd/nand_ecc.h> #endif -#include<linux/mtd/mtd.h> +#include <asm/errno.h> +#include <linux/mtd/mtd.h> /* * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(), @@ -206,7 +205,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) return 1; - return -1; + return -EBADMSG; } /* XXX U-BOOT XXX */ diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 2ff75c94e9..077c3051bc 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -3,8 +3,6 @@ * * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) * - * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -142,5 +140,6 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_STMICRO, "ST Micro"}, {NAND_MFR_HYNIX, "Hynix"}, {NAND_MFR_MICRON, "Micron"}, + {NAND_MFR_AMD, "AMD"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index c22a8a8029..9b7bf3aa3b 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1428,7 +1428,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", - (unsigned int)instr->addr, (unsigned int)ins tr->len); + (unsigned int)instr->addr, (unsigned int)instr->len); block_size = (1 << this->erase_shift); |