dfu: NAND specific routines for DFU operation

Support for NAND storage devices to work with the DFU framework.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Scott Wood <scottwood@freescale.com>

3 files changed, 196 insertions, 0 deletions

diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 7b717bce28..153095d71e 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -27,6 +27,7 @@ LIB	= $(obj)libdfu.o
 
 COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o
 COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o
+COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o
 
 SRCS    := $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 609061dfa3..6af6890d09 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -85,6 +85,7 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 		/* initial state */
 		dfu->crc = 0;
 		dfu->offset = 0;
+		dfu->bad_skip = 0;
 		dfu->i_blk_seq_num = 0;
 		dfu->i_buf_start = dfu_buf;
 		dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
@@ -233,6 +234,8 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 		dfu->i_buf = dfu->i_buf_start;
 		dfu->b_left = 0;
 
+		dfu->bad_skip = 0;
+
 		dfu->inited = 1;
 	}
 
@@ -262,6 +265,8 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 		dfu->i_buf = dfu->i_buf_start;
 		dfu->b_left = 0;
 
+		dfu->bad_skip = 0;
+
 		dfu->inited = 0;
 	}
 
@@ -284,6 +289,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
 	if (strcmp(interface, "mmc") == 0) {
 		if (dfu_fill_entity_mmc(dfu, s))
 			return -1;
+	} else if (strcmp(interface, "nand") == 0) {
+		if (dfu_fill_entity_nand(dfu, s))
+			return -1;
 	} else {
 		printf("%s: Device %s not (yet) supported!\n",
 		       __func__,  interface);
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
new file mode 100644
index 0000000000..7dc89b2f2b
--- /dev/null
+++ b/drivers/dfu/dfu_nand.c
@@ -0,0 +1,187 @@
+/*
+ * dfu_nand.c -- DFU for NAND routines.
+ *
+ * Copyright (C) 2012-2013 Texas Instruments, Inc.
+ *
+ * Based on dfu_mmc.c which is:
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <div64.h>
+#include <dfu.h>
+#include <linux/mtd/mtd.h>
+#include <jffs2/load_kernel.h>
+#include <nand.h>
+
+enum dfu_nand_op {
+	DFU_OP_READ = 1,
+	DFU_OP_WRITE,
+};
+
+static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu,
+			u64 offset, void *buf, long *len)
+{
+	loff_t start, lim;
+	size_t count, actual;
+	int ret;
+	nand_info_t *nand;
+
+	/* if buf == NULL return total size of the area */
+	if (buf == NULL) {
+		*len = dfu->data.nand.size;
+		return 0;
+	}
+
+	start = dfu->data.nand.start + offset + dfu->bad_skip;
+	lim = dfu->data.nand.start + dfu->data.nand.size - start;
+	count = *len;
+
+	if (nand_curr_device < 0 ||
+	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+	    !nand_info[nand_curr_device].name) {
+		printf("%s: invalid nand device\n", __func__);
+		return -1;
+	}
+
+	nand = &nand_info[nand_curr_device];
+
+	if (op == DFU_OP_READ)
+		ret = nand_read_skip_bad(nand, start, &count, &actual,
+				lim, buf);
+	else
+		ret = nand_write_skip_bad(nand, start, &count, &actual,
+				lim, buf, 0);
+
+	if (ret != 0) {
+		printf("%s: nand_%s_skip_bad call failed at %llx!\n",
+		       __func__, op == DFU_OP_READ ? "read" : "write",
+		       start);
+		return ret;
+	}
+
+	/*
+	 * Find out where we stopped writing data.  This can be deeper into
+	 * the NAND than we expected due to having to skip bad blocks.  So
+	 * we must take this into account for the next write, if any.
+	 */
+	if (actual > count)
+		dfu->bad_skip += actual - count;
+
+	return ret;
+}
+
+static inline int nand_block_write(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+}
+
+static inline int nand_block_read(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
+}
+
+static int dfu_write_medium_nand(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_write(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
+		long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_read(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
+{
+	char *st;
+	int ret, dev, part;
+
+	dfu->dev_type = DFU_DEV_NAND;
+	st = strsep(&s, " ");
+	if (!strcmp(st, "raw")) {
+		dfu->layout = DFU_RAW_ADDR;
+		dfu->data.nand.start = simple_strtoul(s, &s, 16);
+		s++;
+		dfu->data.nand.size = simple_strtoul(s, &s, 16);
+	} else if (!strcmp(st, "part")) {
+		char mtd_id[32];
+		struct mtd_device *mtd_dev;
+		u8 part_num;
+		struct part_info *pi;
+
+		dfu->layout = DFU_RAW_ADDR;
+
+		dev = simple_strtoul(s, &s, 10);
+		s++;
+		part = simple_strtoul(s, &s, 10);
+
+		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
+		printf("using id '%s'\n", mtd_id);
+
+		mtdparts_init();
+
+		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+		if (ret != 0) {
+			printf("Could not locate '%s'\n", mtd_id);
+			return -1;
+		}
+
+		dfu->data.nand.start = pi->offset;
+		dfu->data.nand.size = pi->size;
+
+	} else {
+		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
+		return -1;
+	}
+
+	dfu->read_medium = dfu_read_medium_nand;
+	dfu->write_medium = dfu_write_medium_nand;
+
+	/* initial state */
+	dfu->inited = 0;
+
+	return 0;
+}