mmc: zynq_sdhci: Add support for SD3.0

This patch adds support of SD3.0 for ZynqMP.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

1 files changed, 226 insertions, 5 deletions

diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index b53308a852..f99731fb1f 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -9,9 +9,11 @@
 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
+#include "mmc_private.h"
 #include <linux/libfdt.h>
 #include <malloc.h>
 #include <sdhci.h>
+#include <zynqmp_tap_delay.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -21,15 +23,212 @@ struct arasan_sdhci_plat {
 	unsigned int f_max;
 };
 
+struct arasan_sdhci_priv {
+	struct sdhci_host *host;
+	u8 deviceid;
+	u8 bank;
+	u8 no_1p8;
+	bool pwrseq;
+};
+
+#if defined(CONFIG_ARCH_ZYNQMP)
+static const u8 mode2timing[] = {
+	     [UHS_SDR12] = UHS_SDR12_BUS_SPEED,
+	     [UHS_SDR25] = UHS_SDR25_BUS_SPEED,
+	     [UHS_SDR50] = UHS_SDR50_BUS_SPEED,
+	     [UHS_SDR104] = UHS_SDR104_BUS_SPEED,
+	     [UHS_DDR50] = UHS_DDR50_BUS_SPEED,
+};
+
+#define SDHCI_HOST_CTRL2	0x3E
+#define SDHCI_CTRL2_MODE_MASK	0x7
+#define SDHCI_18V_SIGNAL	0x8
+#define SDHCI_CTRL_EXEC_TUNING	0x0040
+#define SDHCI_CTRL_TUNED_CLK	0x80
+#define SDHCI_TUNING_LOOP_COUNT	40
+
+static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
+{
+	u16 clk;
+	unsigned long timeout;
+
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	clk &= ~(SDHCI_CLOCK_CARD_EN);
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Issue DLL Reset */
+	zynqmp_dll_reset(deviceid);
+
+	/* Wait max 20 ms */
+	timeout = 100;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+				& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			dev_err(mmc_dev(host->mmc),
+				": Internal clock never stabilised.\n");
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
+{
+	struct mmc_cmd cmd;
+	struct mmc_data data;
+	u32 ctrl;
+	struct sdhci_host *host;
+	struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
+	u8 tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
+	u8 deviceid;
+
+	debug("%s\n", __func__);
+
+	host = priv->host;
+	deviceid = priv->deviceid;
+
+	ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
+	ctrl |= SDHCI_CTRL_EXEC_TUNING;
+	sdhci_writew(host, ctrl, SDHCI_HOST_CTRL2);
+
+	mdelay(1);
+
+	arasan_zynqmp_dll_reset(host, deviceid);
+
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
+	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
+
+	do {
+		cmd.cmdidx = opcode;
+		cmd.resp_type = MMC_RSP_R1;
+		cmd.cmdarg = 0;
+
+		data.blocksize = 64;
+		data.blocks = 1;
+		data.flags = MMC_DATA_READ;
+
+		if (tuning_loop_counter-- == 0)
+			break;
+
+		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
+		    mmc->bus_width == 8)
+			data.blocksize = 128;
+
+		sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+						    data.blocksize),
+			     SDHCI_BLOCK_SIZE);
+		sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
+		sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
+
+		mmc_send_cmd(mmc, &cmd, NULL);
+		ctrl = sdhci_readw(host, SDHCI_HOST_CTRL2);
+
+		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
+			udelay(1);
+
+	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
+
+	if (tuning_loop_counter < 0) {
+		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
+		sdhci_writel(host, ctrl, SDHCI_HOST_CTRL2);
+	}
+
+	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
+		printf("%s:Tuning failed\n", __func__);
+		return -1;
+	}
+
+	udelay(1);
+	arasan_zynqmp_dll_reset(host, deviceid);
+
+	/* Enable only interrupts served by the SD controller */
+	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+		     SDHCI_INT_ENABLE);
+	/* Mask all sdhci interrupt sources */
+	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
+
+	return 0;
+}
+
+static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
+{
+	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
+	struct mmc *mmc = (struct mmc *)host->mmc;
+	u8 uhsmode;
+
+	if (!IS_SD(mmc))
+		return;
+
+	uhsmode = mode2timing[mmc->selected_mode];
+
+	if (uhsmode >= UHS_SDR25_BUS_SPEED)
+		arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
+					   priv->bank);
+}
+
+static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
+{
+	struct mmc *mmc = (struct mmc *)host->mmc;
+	u32 reg;
+
+	if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
+		reg |= SDHCI_18V_SIGNAL;
+		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
+	}
+
+	if (mmc->selected_mode > SD_HS &&
+	    mmc->selected_mode <= UHS_DDR50) {
+		reg = sdhci_readw(host, SDHCI_HOST_CTRL2);
+		reg &= ~SDHCI_CTRL2_MODE_MASK;
+		switch (mmc->selected_mode) {
+		case UHS_SDR12:
+			reg |= UHS_SDR12_BUS_SPEED;
+			break;
+		case UHS_SDR25:
+			reg |= UHS_SDR25_BUS_SPEED;
+			break;
+		case UHS_SDR50:
+			reg |= UHS_SDR50_BUS_SPEED;
+			break;
+		case UHS_SDR104:
+			reg |= UHS_SDR104_BUS_SPEED;
+			break;
+		case UHS_DDR50:
+			reg |= UHS_DDR50_BUS_SPEED;
+			break;
+		default:
+			break;
+		}
+		sdhci_writew(host, reg, SDHCI_HOST_CTRL2);
+	}
+}
+#endif
+
+#if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
+const struct sdhci_ops arasan_ops = {
+	.platform_execute_tuning	= &arasan_sdhci_execute_tuning,
+	.set_delay = &arasan_sdhci_set_tapdelay,
+	.set_control_reg = &arasan_sdhci_set_control_reg,
+};
+#endif
+
 static int arasan_sdhci_probe(struct udevice *dev)
 {
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
-	struct sdhci_host *host = dev_get_priv(dev);
+	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
+	struct sdhci_host *host;
 	struct clk clk;
 	unsigned long clock;
 	int ret;
 
+	host = priv->host;
+
 	ret = clk_get_by_index(dev, 0, &clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get clock\n");
@@ -41,6 +240,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 		dev_err(dev, "failed to get rate\n");
 		return clock;
 	}
+
 	debug("%s: CLK %ld\n", __func__, clock);
 
 	ret = clk_enable(&clk);
@@ -56,6 +256,9 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif
 
+	if (priv->no_1p8)
+		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
+
 	host->max_clk = clock;
 
 	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
@@ -73,10 +276,28 @@ static int arasan_sdhci_probe(struct udevice *dev)
 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 {
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
-	struct sdhci_host *host = dev_get_priv(dev);
+	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
+
+	priv->host = calloc(1, sizeof(struct sdhci_host));
+	if (!priv->host)
+		return -1;
 
-	host->name = dev->name;
-	host->ioaddr = (void *)devfdt_get_addr(dev);
+	priv->host->name = dev->name;
+	priv->host->ioaddr = (void *)devfdt_get_addr(dev);
+
+	priv->deviceid = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+					"xlnx,device_id", -1);
+	priv->bank = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+				    "xlnx,mio_bank", -1);
+	if (fdt_get_property(gd->fdt_blob, dev_of_offset(dev),
+			     "no-1-8-v", NULL))
+		priv->no_1p8 = 1;
+	else
+		priv->no_1p8 = 0;
+
+#if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP)
+	priv->host->ops = &arasan_ops;
+#endif
 
 	plat->f_max = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
 				"max-frequency", CONFIG_ZYNQ_SDHCI_MAX_FREQ);
@@ -104,6 +325,6 @@ U_BOOT_DRIVER(arasan_sdhci_drv) = {
 	.ops		= &sdhci_ops,
 	.bind		= arasan_sdhci_bind,
 	.probe		= arasan_sdhci_probe,
-	.priv_auto_alloc_size = sizeof(struct sdhci_host),
+	.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
 	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
 };