Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

4 files changed, 239 insertions, 2 deletions

diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
index 3569214297..15d65d77f3 100644
--- a/drivers/block/dwc_ahsata.c
+++ b/drivers/block/dwc_ahsata.c
@@ -17,6 +17,7 @@
 #include <asm/io.h>
 #include <linux/bitops.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 #include "dwc_ahsata.h"
 
 struct sata_port_regs {
@@ -558,6 +559,10 @@ int init_sata(int dev)
 	u32 linkmap;
 	struct ahci_probe_ent *probe_ent = NULL;
 
+#if defined(CONFIG_MX6)
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		return 1;
+#endif
 	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
 		printf("The sata index %d is out of ranges\n\r", dev);
 		return -1;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4eb354da93..bf1312a373 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -68,5 +68,6 @@ else  # minimal SPL drivers
 obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
 
 endif # drivers
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
new file mode 100644
index 0000000000..0e7c364a22
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <nand.h>
+#include <malloc.h>
+
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+static void mxs_nand_command(struct mtd_info *mtd, unsigned int command,
+			     int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+	u32 timeo, time_start;
+
+	/* write out the command to the device */
+	chip->cmd_ctrl(mtd, command, NAND_CLE);
+
+	/* Serially input address */
+	if (column != -1) {
+		chip->cmd_ctrl(mtd, column, NAND_ALE);
+		chip->cmd_ctrl(mtd, column >> 8, NAND_ALE);
+	}
+	if (page_addr != -1) {
+		chip->cmd_ctrl(mtd, page_addr, NAND_ALE);
+		chip->cmd_ctrl(mtd, page_addr >> 8, NAND_ALE);
+		/* One more address cycle for devices > 128MiB */
+		if (chip->chipsize > (128 << 20))
+			chip->cmd_ctrl(mtd, page_addr >> 16, NAND_ALE);
+	}
+	chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+
+	if (command == NAND_CMD_READ0) {
+		chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_CLE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+	}
+
+	/* wait for nand ready */
+	ndelay(100);
+	timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	time_start = get_timer(0);
+	while (get_timer(time_start) < timeo) {
+		if (chip->dev_ready(mtd))
+			break;
+	}
+}
+
+static int mxs_flash_ident(struct mtd_info *mtd)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int i;
+	u8 mfg_id, dev_id;
+	u8 id_data[8];
+	struct nand_onfi_params *p = &chip->onfi_params;
+
+	/* Reset the chip */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Send the command for reading device ID */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	mfg_id = chip->read_byte(mtd);
+	dev_id = chip->read_byte(mtd);
+
+	/* Try again to make sure */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+	for (i = 0; i < 8; i++)
+		id_data[i] = chip->read_byte(mtd);
+	if (id_data[0] != mfg_id || id_data[1] != dev_id) {
+		printf("second ID read did not match");
+		return -1;
+	}
+	debug("0x%02x:0x%02x ", mfg_id, dev_id);
+
+	/* read ONFI */
+	chip->onfi_version = 0;
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+	    chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') {
+		return -2;
+	}
+
+	/* we have ONFI, probe it */
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+	chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+	mtd->name = p->model;
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	/* Calculate the address shift from the page size */
+	chip->page_shift = ffs(mtd->writesize) - 1;
+	chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
+	/* Convert chipsize to number of pages per chip -1 */
+	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+	chip->badblockbits = 8;
+
+	debug("erasesize=%d (>>%d)\n", mtd->erasesize, chip->phys_erase_shift);
+	debug("writesize=%d (>>%d)\n", mtd->writesize, chip->page_shift);
+	debug("oobsize=%d\n", mtd->oobsize);
+	debug("chipsize=%lld\n", chip->chipsize);
+
+	return 0;
+}
+
+static int mxs_read_page_ecc(struct mtd_info *mtd, void *buf, unsigned int page)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page);
+	ret = nand_chip.ecc.read_page(mtd, chip, buf, 1, page);
+	if (ret < 0) {
+		printf("read_page failed %d\n", ret);
+		return -1;
+	}
+	return 0;
+}
+
+static int is_badblock(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	register struct nand_chip *chip = mtd->priv;
+	unsigned int block = offs >> chip->phys_erase_shift;
+	unsigned int page = offs >> chip->page_shift;
+
+	debug("%s offs=0x%08x block:%d page:%d\n", __func__, (int)offs, block,
+	      page);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+	memset(chip->oob_poi, 0, mtd->oobsize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return chip->oob_poi[0] != 0xff;
+}
+
+/* setup mtd and nand structs and init mxs_nand driver */
+static int mxs_nand_init(void)
+{
+	/* return if already initalized */
+	if (nand_chip.numchips)
+		return 0;
+
+	/* init mxs nand driver */
+	board_nand_init(&nand_chip);
+	mtd.priv = &nand_chip;
+	/* set mtd functions */
+	nand_chip.cmdfunc = mxs_nand_command;
+	nand_chip.numchips = 1;
+
+	/* identify flash device */
+	puts("NAND : ");
+	if (mxs_flash_ident(&mtd)) {
+		printf("Failed to identify\n");
+		return -1;
+	}
+
+	/* allocate and initialize buffers */
+	nand_chip.buffers = memalign(ARCH_DMA_MINALIGN,
+				     sizeof(*nand_chip.buffers));
+	nand_chip.oob_poi = nand_chip.buffers->databuf + mtd.writesize;
+	/* setup flash layout (does not scan as we override that) */
+	mtd.size = nand_chip.chipsize;
+	nand_chip.scan_bbt(&mtd);
+
+	printf("%llu MiB\n", (mtd.size / (1024 * 1024)));
+	return 0;
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)
+{
+	struct nand_chip *chip;
+	unsigned int page;
+	unsigned int nand_page_per_block;
+	unsigned int sz = 0;
+
+	if (mxs_nand_init())
+		return -ENODEV;
+	chip = mtd.priv;
+	page = offs >> chip->page_shift;
+	nand_page_per_block = mtd.erasesize / mtd.writesize;
+
+	debug("%s offset:0x%08x len:%d page:%d\n", __func__, offs, size, page);
+
+	size = roundup(size, mtd.writesize);
+	while (sz < size) {
+		if (mxs_read_page_ecc(&mtd, buf, page) < 0)
+			return -1;
+		sz += mtd.writesize;
+		offs += mtd.writesize;
+		page++;
+		buf += mtd.writesize;
+
+		/*
+		 * Check if we have crossed a block boundary, and if so
+		 * check for bad block.
+		 */
+		if (!(page % nand_page_per_block)) {
+			/*
+			 * Yes, new block. See if this block is good. If not,
+			 * loop until we find a good block.
+			 */
+			while (is_badblock(&mtd, offs, 1)) {
+				page = page + nand_page_per_block;
+				/* Check i we've reached the end of flash. */
+				if (page >= mtd.size >> chip->page_shift)
+					return -ENOMEM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int nand_default_bbt(struct mtd_info *mtd)
+{
+	return 0;
+}
+
+void nand_init(void)
+{
+}
+
+void nand_deselect(void)
+{
+}
+
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 56bee55208..313d560afc 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -77,7 +77,7 @@
 #define  UCR3_DSR        (1<<10) /* Data set ready */
 #define  UCR3_DCD        (1<<9)  /* Data carrier detect */
 #define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
+#define  UCR3_ADNIMP     (1<<7)  /* Autobaud Detection Not Improved */
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
@@ -186,7 +186,7 @@ static int mxc_serial_init(void)
 
 	while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
 
-	__REG(UART_PHYS + UCR3) = 0x0704;
+	__REG(UART_PHYS + UCR3) = 0x0704 | UCR3_ADNIMP;
 	__REG(UART_PHYS + UCR4) = 0x8000;
 	__REG(UART_PHYS + UESC) = 0x002b;
 	__REG(UART_PHYS + UTIM) = 0x0;