diff options
| author | Ye Li <ye.li@nxp.com> | 2019-07-10 10:24:15 +0000 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2019-08-27 06:20:23 +0200 |
| commit | d7d864017d7f21a4cc3ff2a902024724c26ad213 (patch) | |
| tree | 609a054b97288ae827922409e8035795fd91f572 /drivers | |
| parent | 42cc3125c414b340b3c90600486c6951325b27a6 (diff) | |
i2c: mxc_i2c: Remove i2c_idle_bus from probe
i2c_idle_bus is already used in i2c_init_transfer. So before each transfer
if the bus is not ready, the i2c_idle_bus will be used to force idle.
It is unnecessary to call it again in probe.
We found a issue when enabling i2c mux with the mxc_i2c. The mxc_i2c is probed
after mux probing. However, at this moment the mux is still in idle state not
select any port. So if we call i2c_idle_bus in probe, it will fail and cause
mxc_i2c probe failed.
Signed-off-by: Ye Li <ye.li@nxp.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/mxc_i2c.c | 7 |
1 files changed, 0 insertions, 7 deletions
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 73b9807598..20f6dc4ecb 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -917,13 +917,6 @@ static int mxc_i2c_probe(struct udevice *bus) } } - ret = i2c_idle_bus(i2c_bus); - if (ret < 0) { - /* Disable clk */ - enable_i2c_clk(0, bus->seq); - return ret; - } - /* * Pinmux settings are in board file now, until pinmux is supported, * we can set pinmux here in probe function. |