diff options
author | Tom Rini <trini@ti.com> | 2013-08-18 14:14:34 -0400 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-08-18 14:14:34 -0400 |
commit | e20cc2ca15b5b0644f51b6e58d530d70acd2bc00 (patch) | |
tree | f85a22536682ef54e77b1ba95cf0b71d00644632 /drivers | |
parent | f21876174364391757e743cb8673d3fc5fce7ac7 (diff) | |
parent | 9ed887caecb9ecb0c68773a1870d143b9f28d3da (diff) |
Merge branch 'master' of git://88.191.163.10/u-boot-arm
Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.
Conflicts:
arch/arm/include/asm/arch-am33xx/hardware.h
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/mxc_gpio.c | 4 | ||||
-rw-r--r-- | drivers/gpio/tca642x.c | 333 | ||||
-rw-r--r-- | drivers/net/calxedaxgmac.c | 2 | ||||
-rw-r--r-- | drivers/net/cpsw.c | 7 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 6 | ||||
-rw-r--r-- | drivers/serial/ns16550.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_core.c | 20 | ||||
-rw-r--r-- | drivers/video/mxc_ipuv3_fb.c | 5 |
9 files changed, 359 insertions, 24 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index af94bf572e..71ddb00bb5 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o COBJS-$(CONFIG_S3C2440_GPIO) += s3c2440_gpio.o COBJS-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o COBJS-$(CONFIG_ADI_GPIO2) += adi_gpio2.o +COBJS-$(CONFIG_TCA642X) += tca642x.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 46c0255adc..6a572d5454 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -127,10 +127,10 @@ int gpio_direction_input(unsigned gpio) int gpio_direction_output(unsigned gpio, int value) { - int ret = mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT); + int ret = gpio_set_value(gpio, value); if (ret < 0) return ret; - return gpio_set_value(gpio, value); + return mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT); } diff --git a/drivers/gpio/tca642x.c b/drivers/gpio/tca642x.c new file mode 100644 index 0000000000..6386835d5d --- /dev/null +++ b/drivers/gpio/tca642x.c @@ -0,0 +1,333 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * Author: Dan Murphy <dmurphy@ti.com> + * + * Derived work from the pca953x.c driver + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> +#include <tca642x.h> + +/* tca642x register address definitions */ +struct tca642x_bank_info tca642x_regs[] = { + { .input_reg = 0x00, + .output_reg = 0x04, + .polarity_reg = 0x08, + .configuration_reg = 0x0c }, + { .input_reg = 0x01, + .output_reg = 0x05, + .polarity_reg = 0x09, + .configuration_reg = 0x0d }, + { .input_reg = 0x02, + .output_reg = 0x06, + .polarity_reg = 0x0a, + .configuration_reg = 0x0e }, +}; + +/* + * Modify masked bits in register + */ +static int tca642x_reg_write(uchar chip, uint8_t addr, + uint8_t reg_bit, uint8_t data) +{ + uint8_t valw; + int org_bus_num; + int ret; + + org_bus_num = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); + + if (i2c_read(chip, addr, 1, (uint8_t *)&valw, 1)) { + printf("Could not read before writing\n"); + ret = -1; + goto error; + } + valw &= ~reg_bit; + valw |= data; + + ret = i2c_write(chip, addr, 1, (u8 *)&valw, 1); + +error: + i2c_set_bus_num(org_bus_num); + return ret; +} + +static int tca642x_reg_read(uchar chip, uint8_t addr, uint8_t *data) +{ + uint8_t valw; + int org_bus_num; + int ret = 0; + + org_bus_num = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); + if (i2c_read(chip, addr, 1, (u8 *)&valw, 1)) { + ret = -1; + goto error; + } + + *data = valw; + +error: + i2c_set_bus_num(org_bus_num); + return ret; +} + +/* + * Set output value of IO pins in 'reg_bit' to corresponding value in 'data' + * 0 = low, 1 = high + */ +int tca642x_set_val(uchar chip, uint8_t gpio_bank, + uint8_t reg_bit, uint8_t data) +{ + uint8_t out_reg = tca642x_regs[gpio_bank].output_reg; + + return tca642x_reg_write(chip, out_reg, reg_bit, data); +} + +/* + * Set read polarity of IO pins in 'reg_bit' to corresponding value in 'data' + * 0 = read pin value, 1 = read inverted pin value + */ +int tca642x_set_pol(uchar chip, uint8_t gpio_bank, + uint8_t reg_bit, uint8_t data) +{ + uint8_t pol_reg = tca642x_regs[gpio_bank].polarity_reg; + + return tca642x_reg_write(chip, pol_reg, reg_bit, data); +} + +/* + * Set direction of IO pins in 'reg_bit' to corresponding value in 'data' + * 0 = output, 1 = input + */ +int tca642x_set_dir(uchar chip, uint8_t gpio_bank, + uint8_t reg_bit, uint8_t data) +{ + uint8_t config_reg = tca642x_regs[gpio_bank].configuration_reg; + + return tca642x_reg_write(chip, config_reg, reg_bit, data); +} + +/* + * Read current logic level of all IO pins + */ +int tca642x_get_val(uchar chip, uint8_t gpio_bank) +{ + uint8_t val; + uint8_t in_reg = tca642x_regs[gpio_bank].input_reg; + + if (tca642x_reg_read(chip, in_reg, &val) < 0) + return -1; + + return (int)val; +} + +/* + * Set the inital register states for the tca642x gpio expander + */ +int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[]) +{ + int i, ret; + uint8_t config_reg; + uint8_t polarity_reg; + uint8_t output_reg; + + for (i = 0; i < 3; i++) { + config_reg = tca642x_regs[i].configuration_reg; + ret = tca642x_reg_write(chip, config_reg, 0xff, + init_data[i].configuration_reg); + polarity_reg = tca642x_regs[i].polarity_reg; + ret = tca642x_reg_write(chip, polarity_reg, 0xff, + init_data[i].polarity_reg); + output_reg = tca642x_regs[i].output_reg; + ret = tca642x_reg_write(chip, output_reg, 0xff, + init_data[i].output_reg); + } + + return ret; +} + +#ifdef CONFIG_CMD_TCA642X +/* + * Display tca642x information + */ +static int tca642x_info(uchar chip) +{ + int i, j; + uint8_t data; + + printf("tca642x@ 0x%x (%d pins):\n", chip, 24); + for (i = 0; i < 3; i++) { + printf("Bank %i\n", i); + if (tca642x_reg_read(chip, + tca642x_regs[i].configuration_reg, + &data) < 0) + return -1; + printf("\tConfiguration: "); + for (j = 7; j >= 0; j--) + printf("%c", data & (1 << j) ? 'i' : 'o'); + printf("\n"); + + if (tca642x_reg_read(chip, + tca642x_regs[i].polarity_reg, &data) < 0) + return -1; + printf("\tPolarity: "); + for (j = 7; j >= 0; j--) + printf("%c", data & (1 << j) ? '1' : '0'); + printf("\n"); + + if (tca642x_reg_read(chip, + tca642x_regs[i].input_reg, &data) < 0) + return -1; + printf("\tInput value: "); + for (j = 7; j >= 0; j--) + printf("%c", data & (1 << j) ? '1' : '0'); + printf("\n"); + + if (tca642x_reg_read(chip, + tca642x_regs[i].output_reg, &data) < 0) + return -1; + printf("\tOutput value: "); + for (j = 7; j >= 0; j--) + printf("%c", data & (1 << j) ? '1' : '0'); + printf("\n"); + } + + return 0; +} + +cmd_tbl_t cmd_tca642x[] = { + U_BOOT_CMD_MKENT(device, 3, 0, (void *)TCA642X_CMD_DEVICE, "", ""), + U_BOOT_CMD_MKENT(output, 4, 0, (void *)TCA642X_CMD_OUTPUT, "", ""), + U_BOOT_CMD_MKENT(input, 3, 0, (void *)TCA642X_CMD_INPUT, "", ""), + U_BOOT_CMD_MKENT(invert, 4, 0, (void *)TCA642X_CMD_INVERT, "", ""), + U_BOOT_CMD_MKENT(info, 2, 0, (void *)TCA642X_CMD_INFO, "", ""), +}; + +int do_tca642x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + static uchar chip = CONFIG_SYS_I2C_TCA642X_ADDR; + int ret = CMD_RET_USAGE, val; + uint8_t gpio_bank = 0; + uint8_t bank_shift; + ulong ul_arg2 = 0; + ulong ul_arg3 = 0; + cmd_tbl_t *c; + + c = find_cmd_tbl(argv[1], cmd_tca642x, ARRAY_SIZE(cmd_tca642x)); + + /* All commands but "device" require 'maxargs' arguments */ + if (!c || + !((argc == (c->maxargs)) || + (((int)c->cmd == TCA642X_CMD_DEVICE) && + (argc == (c->maxargs - 1))))) { + return CMD_RET_USAGE; + } + + /* arg2 used as chip number or pin number */ + if (argc > 2) + ul_arg2 = simple_strtoul(argv[2], NULL, 10); + + /* arg3 used as pin or invert value */ + if (argc > 3) { + ul_arg3 = simple_strtoul(argv[3], NULL, 10) & 0x1; + if (ul_arg2 <= 7) { + gpio_bank = 0; + } else if ((ul_arg2 >= 10) && (ul_arg2 <= 17)) { + gpio_bank = 1; + } else if ((ul_arg2 >= 20) && (ul_arg2 <= 27)) { + gpio_bank = 2; + } else { + printf("Requested pin is not available\n"); + ret = CMD_RET_FAILURE; + goto error; + } + } + + switch ((int)c->cmd) { + case TCA642X_CMD_INFO: + ret = tca642x_info(chip); + if (ret) + ret = CMD_RET_FAILURE; + break; + + case TCA642X_CMD_DEVICE: + if (argc == 3) + chip = (uint8_t)ul_arg2; + printf("Current device address: 0x%x\n", chip); + ret = CMD_RET_SUCCESS; + break; + + case TCA642X_CMD_INPUT: + bank_shift = ul_arg2 - (gpio_bank * 10); + ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift), + TCA642X_DIR_IN << bank_shift); + val = (tca642x_get_val(chip, gpio_bank) & + (1 << bank_shift)) != 0; + + if (ret) + ret = CMD_RET_FAILURE; + else + printf("chip 0x%02x, pin 0x%lx = %d\n", chip, + ul_arg2, val); + break; + + case TCA642X_CMD_OUTPUT: + bank_shift = ul_arg2 - (gpio_bank * 10); + ret = tca642x_set_dir(chip, gpio_bank, (1 << bank_shift), + (TCA642X_DIR_OUT << bank_shift)); + if (!ret) + ret = tca642x_set_val(chip, + gpio_bank, (1 << bank_shift), + (ul_arg3 << bank_shift)); + if (ret) + ret = CMD_RET_FAILURE; + break; + + case TCA642X_CMD_INVERT: + bank_shift = ul_arg2 - (gpio_bank * 10); + ret = tca642x_set_pol(chip, gpio_bank, (1 << bank_shift), + (ul_arg3 << bank_shift)); + if (ret) + ret = CMD_RET_FAILURE; + break; + } +error: + if (ret == CMD_RET_FAILURE) + eprintf("Error talking to chip at 0x%x\n", chip); + + return ret; +} + +U_BOOT_CMD( + tca642x, 5, 1, do_tca642x, + "tca642x gpio access", + "device [dev]\n" + " - show or set current device address\n" + "tca642x info\n" + " - display info for current chip\n" + "tca642x output pin 0|1\n" + " - set pin as output and drive low or high\n" + "tca642x invert pin 0|1\n" + " - disable/enable polarity inversion for reads\n" + "tca642x input pin\n" + " - set pin as input and read value" +); + +#endif /* CONFIG_CMD_TCA642X */ diff --git a/drivers/net/calxedaxgmac.c b/drivers/net/calxedaxgmac.c index 2c617105f5..ff94865c5d 100644 --- a/drivers/net/calxedaxgmac.c +++ b/drivers/net/calxedaxgmac.c @@ -390,7 +390,7 @@ static int xgmac_init(struct eth_device *dev, bd_t * bis) /* set flow control parameters and store and forward mode */ value = (FIFO_MINUS_12K << XGMAC_CORE_OMR_RFD_SHIFT) | (FIFO_MINUS_4K << XGMAC_CORE_OMR_RFA_SHIFT) | - XGMAC_CORE_OMR_EFC | XGMAC_CORE_OMR_TSF | XGMAC_CORE_OMR_RSF; + XGMAC_CORE_OMR_EFC | XGMAC_CORE_OMR_TSF; writel(value, ®s->core_opmode); /* enable pause frames */ diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index 379b679d2e..9bab71a212 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -51,8 +51,6 @@ #define CPDMA_RXCP_VER1 0x160 #define CPDMA_RXCP_VER2 0x260 -#define CPDMA_RAM_ADDR 0x4a102000 - /* Descriptor mode bits */ #define CPDMA_DESC_SOP BIT(31) #define CPDMA_DESC_EOP BIT(30) @@ -489,7 +487,7 @@ static inline void wait_for_idle(void) static int cpsw_mdio_read(struct mii_dev *bus, int phy_id, int dev_addr, int phy_reg) { - unsigned short data; + int data; u32 reg; if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) @@ -774,6 +772,7 @@ static int cpsw_init(struct eth_device *dev, bd_t *bis) /* enable statistics collection only on the host port */ __raw_writel(BIT(priv->host_port), &priv->regs->stat_port_en); + __raw_writel(0x7, &priv->regs->stat_port_en); cpsw_ale_port_state(priv, priv->host_port, ALE_PORT_STATE_FORWARD); @@ -984,12 +983,12 @@ int cpsw_register(struct cpsw_platform_data *data) return -ENOMEM; } - priv->descs = (void *)CPDMA_RAM_ADDR; priv->host_port = data->host_port_num; priv->regs = regs; priv->host_port_regs = regs + data->host_port_reg_ofs; priv->dma_regs = regs + data->cpdma_reg_ofs; priv->ale_regs = regs + data->ale_reg_ofs; + priv->descs = (void *)regs + data->bd_ram_ofs; int idx = 0; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 6fe793de5d..62925bb286 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -277,7 +277,7 @@ int genphy_parse_link(struct phy_device *phydev) /* We're using autonegotiation */ if (mii_reg & BMSR_ANEGCAPABLE) { u32 lpa = 0; - u32 gblpa = 0; + int gblpa = 0; u32 estatus = 0; /* Check for gigabit capability */ @@ -286,6 +286,10 @@ int genphy_parse_link(struct phy_device *phydev) * both PHYs in the link */ gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); + if (gblpa < 0) { + debug("Could not read MII_STAT1000. Ignoring gigabit capability\n"); + gblpa = 0; + } gblpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000) << 2; } diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index d77c25fa9b..181c81815a 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) + defined(CONFIG_AM33XX) || defined(CONFIG_TI81XX) || \ + defined(CONFIG_AM43XX) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); @@ -72,7 +73,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ - defined(CONFIG_TI814X) + defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) /* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1); diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index da9357149b..36681b6fc8 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -1311,9 +1311,7 @@ static int __devinit ep_config_from_table(struct musb *musb) break; } - printk(KERN_DEBUG "%s: setup fifo_mode %d\n", - musb_driver_name, fifo_mode); - + pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode); done: offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0); @@ -1341,10 +1339,9 @@ done: musb->nr_endpoints = max(epn, musb->nr_endpoints); } - printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", - musb_driver_name, - n + 1, musb->config->num_eps * 2 - 1, - offset, (1 << (musb->config->ram_bits + 2))); + pr_debug("%s: %d/%d max ep, %d/%d memory\n", musb_driver_name, n + 1, + musb->config->num_eps * 2 - 1, offset, + (1 << (musb->config->ram_bits + 2))); if (!musb->bulk_ep) { pr_debug("%s: missing bulk\n", musb_driver_name); @@ -1447,8 +1444,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) if (reg & MUSB_CONFIGDATA_SOFTCONE) strcat(aInfo, ", SoftConn"); - printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", - musb_driver_name, reg, aInfo); + pr_debug("%s:ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); aDate[0] = 0; if (MUSB_CONTROLLER_MHDRC == musb_type) { @@ -1469,8 +1465,8 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers), MUSB_HWVERS_MINOR(musb->hwvers), (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); - printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n", - musb_driver_name, type, aRevision, aDate); + pr_debug("%s: %sHDRC RTL version %s %s\n", musb_driver_name, type, + aRevision, aDate); /* configure ep0 */ musb_configure_ep0(musb); @@ -2122,7 +2118,7 @@ musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev, pm_runtime_put(musb->controller); - dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", + pr_debug("USB %s mode controller at %p using %s, IRQ %d\n", ({char *s; switch (musb->board_mode) { case MUSB_HOST: s = "Host"; break; diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index fd74370ed4..3e21fb2306 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -399,8 +399,9 @@ static int mxcfb_map_video_memory(struct fb_info *fbi) fbi->fix.smem_len = fbi->var.yres_virtual * fbi->fix.line_length; } - - fbi->screen_base = (char *)malloc(fbi->fix.smem_len); + fbi->fix.smem_len = roundup(fbi->fix.smem_len, ARCH_DMA_MINALIGN); + fbi->screen_base = (char *)memalign(ARCH_DMA_MINALIGN, + fbi->fix.smem_len); fbi->fix.smem_start = (unsigned long)fbi->screen_base; if (fbi->screen_base == 0) { puts("Unable to allocate framebuffer memory\n"); |