summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLothar Felten <lothar.felten@gmail.com>2018-07-13 10:45:28 +0200
committerJagan Teki <jagan@amarulasolutions.com>2018-07-16 12:27:27 +0530
commite46d73fa965b5d9febf251e6dcd3638cca711ae8 (patch)
tree5ae7718068ec925b6cff50511a1845c85744e68e /drivers
parentc6a21d6615ea83e150eb7633d96e9f0a2c3f8439 (diff)
net: sun8i-emac: support R40 GMAC
Add support for the GMAC found in the Allwinner R40/V40 SoC. The R40 GMAC interface is not controlled by the syscon register but has a separate configuration register in the CCU. The clock gate and reset bits are in a different register compared to the other SoCs supported by this driver. The driver uses the -gmac suffix for the R40 because the R40 also has a different 100 MBit MAC (EMAC). Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/sun8i_emac.c79
1 files changed, 53 insertions, 26 deletions
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index ee3b2aa7f4..3ba3a1ff8b 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -67,6 +67,7 @@
/* IO mux settings */
#define SUN8I_IOMUX_H3 2
+#define SUN8I_IOMUX_R40 5
#define SUN8I_IOMUX 4
/* H3/A64 EMAC Register's offset */
@@ -97,6 +98,7 @@ enum emac_variant {
A83T_EMAC = 1,
H3_EMAC,
A64_EMAC,
+ R40_GMAC,
};
struct emac_dma_desc {
@@ -278,6 +280,9 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv)
reg = readl(priv->sysctl_reg + 0x30);
+ if (priv->variant == R40_GMAC)
+ return 0;
+
if (priv->variant == H3_EMAC) {
ret = sun8i_emac_set_syscon_ephy(priv, &reg);
if (ret)
@@ -495,6 +500,8 @@ static int parse_phy_pins(struct udevice *dev)
if (priv->variant == H3_EMAC)
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_H3);
+ else if (priv->variant == R40_GMAC)
+ sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_R40);
else
sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX);
@@ -634,11 +641,26 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
}
}
- /* Set clock gating for emac */
- setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
-
- /* De-assert EMAC */
- setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
+ if (priv->variant == R40_GMAC) {
+ /* Set clock gating for emac */
+ setbits_le32(&ccm->ahb_reset1_cfg, BIT(AHB_RESET_OFFSET_GMAC));
+
+ /* De-assert EMAC */
+ setbits_le32(&ccm->ahb_gate1, BIT(AHB_GATE_OFFSET_GMAC));
+
+ /* Select RGMII for R40 */
+ setbits_le32(&ccm->gmac_clk_cfg,
+ CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
+ CCM_GMAC_CTRL_GPIT_RGMII);
+ setbits_le32(&ccm->gmac_clk_cfg,
+ CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
+ } else {
+ /* Set clock gating for emac */
+ setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
+
+ /* De-assert EMAC */
+ setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC));
+ }
}
#if defined(CONFIG_DM_GPIO)
@@ -805,22 +827,32 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
- if (offset < 0) {
- debug("%s: cannot find syscon node\n", __func__);
- return -EINVAL;
- }
- reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
- if (!reg) {
- debug("%s: cannot find reg property in syscon node\n",
- __func__);
+ priv->variant = dev_get_driver_data(dev);
+
+ if (!priv->variant) {
+ printf("%s: Missing variant\n", __func__);
return -EINVAL;
}
- priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
- offset, reg);
- if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
- debug("%s: Cannot find syscon base address\n", __func__);
- return -EINVAL;
+
+ if (priv->variant != R40_GMAC) {
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
+ if (offset < 0) {
+ debug("%s: cannot find syscon node\n", __func__);
+ return -EINVAL;
+ }
+ reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
+ if (!reg) {
+ debug("%s: cannot find reg property in syscon node\n",
+ __func__);
+ return -EINVAL;
+ }
+ priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
+ offset, reg);
+ if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot find syscon base address\n",
+ __func__);
+ return -EINVAL;
+ }
}
pdata->phy_interface = -1;
@@ -845,13 +877,6 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
- priv->variant = dev_get_driver_data(dev);
-
- if (!priv->variant) {
- printf("%s: Missing variant\n", __func__);
- return -EINVAL;
- }
-
if (priv->variant == H3_EMAC) {
int parent = fdt_parent_offset(gd->fdt_blob, offset);
@@ -892,6 +917,8 @@ static const struct udevice_id sun8i_emac_eth_ids[] = {
.data = (uintptr_t)A64_EMAC },
{.compatible = "allwinner,sun8i-a83t-emac",
.data = (uintptr_t)A83T_EMAC },
+ {.compatible = "allwinner,sun8i-r40-gmac",
+ .data = (uintptr_t)R40_GMAC },
{ }
};