diff options
author | Detlev Zundel <dzu@denx.de> | 2010-03-12 10:01:12 +0100 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-03-21 22:44:42 +0100 |
commit | fd428c05c863aefb575b12b2a1916b02d5bfa759 (patch) | |
tree | af61cbc1d945fde6037ef62ce66723e7231183d5 /drivers | |
parent | c0c316569f70055eb7c70864aaa6d48666782600 (diff) |
mpc5xxx: Remove all references to MGT5100
We do not support a processor that never reached a real customer.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/ps2ser.c | 11 | ||||
-rw-r--r-- | drivers/net/mpc5xxx_fec.c | 10 |
2 files changed, 2 insertions, 19 deletions
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c index 1b20a76c4c..8d0b6d6042 100644 --- a/drivers/input/ps2ser.c +++ b/drivers/input/ps2ser.c @@ -36,8 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE MPC5XXX_PSC2 #elif CONFIG_PS2SERIAL == 3 #define PSC_BASE MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PS2SERIAL must be in 1, 2 or 3 #elif CONFIG_PS2SERIAL == 4 #define PSC_BASE MPC5XXX_PSC4 #elif CONFIG_PS2SERIAL == 5 @@ -87,23 +85,14 @@ int ps2ser_init(void) psc->command = PSC_SEL_MODE_REG_1; /* select clock sources */ -#if defined(CONFIG_MGT5100) - psc->psc_clock_select = 0xdd00; - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) psc->psc_clock_select = 0; baseclk = (gd->ipb_clk + 16) / 32; -#endif /* switch to UART mode */ psc->sicr = 0; /* configure parity, bit length and so on */ -#if defined(CONFIG_MGT5100) - psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#elif defined(CONFIG_MPC5200) psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#endif psc->mode = PSC_MODE_ONE_STOP; /* set up UART divisor */ diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c index 1876b7684b..c2b1bbdc7b 100644 --- a/drivers/net/mpc5xxx_fec.c +++ b/drivers/net/mpc5xxx_fec.c @@ -336,13 +336,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) */ fec->eth->xmit_fsm = 0x03000000; -#if defined(CONFIG_MPC5200) /* - * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't + * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't * work w/ the current receive task. */ sdma->PtdCntrl |= 0x00000001; -#endif /* * Set priority of different initiators @@ -579,9 +577,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) /********************************************************************/ static void mpc5xxx_fec_halt(struct eth_device *dev) { -#if defined(CONFIG_MPC5200) struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; -#endif mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; int counter = 0xffff; @@ -611,13 +607,11 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); -#if defined(CONFIG_MPC5200) /* - * Turn on COMM bus prefetch in the MGT5200 BestComm after we're + * Turn on COMM bus prefetch in the MPC5200 BestComm after we're * done. It doesn't work w/ the current receive task. */ sdma->PtdCntrl &= ~0x00000001; -#endif /* * Disable the Ethernet Controller |